The copyright file refers to the versionless symlink in /usr/share/common-licenses for the full text of the GPL, LGPL, or GFDL license, but the package does not appear to allow distribution under later versions of the license. This symlink will change with each release of a new version of the license and may therefore point to a different version than the package is released under. debian/copyright should instead refers to the specific version of the license that the package references. For example, if the package says something like "you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 dated June, 1991," the debian/copyright file should refer to /usr/share/common-licenses/GPL-2, not /GPL. Visibility: warning Show-Always: no Check: debian/copyright
[opt/trinity/bin/kmyfirewall]
[opt/trinity/lib/libkmfcore.so.0.0.0]
[opt/trinity/lib/libkmfwidgets.so.0.0.0]
[opt/trinity/lib/trinity/libkmfcompiler_ipt.so]
[opt/trinity/lib/trinity/libkmfgenericinterfacepart.so]
[opt/trinity/lib/trinity/libkmfinstaller_linux.so]
[opt/trinity/lib/trinity/libkmfinstallerplugin.so]
[opt/trinity/lib/trinity/libkmfipteditorpart.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_custom.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_interface.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_ip.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_limit.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_mac.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_protocol.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_state.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_tos.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_log.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_mark.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_nat.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_tos.so]
This icon file couldn't be found. If the path to the icon in the menu file is an absolute path, make sure that icon exists at that path in the package. If the path is relative or a simple filename, make sure the icon is installed in /usr/share/pixmaps, the default location. If the icon is provided by another package on which this package depends, Lintian may not be able to determine that icon pages are available. In this case, after confirming that all icons are available after this package and its dependencies are installed, please add a Lintian override. Please refer to Debian Menu System section 3.7 for details. Visibility: warning Show-Always: no Check: menu-format
This package contains a menu file which references an icon by a relative path. However, icons should be referenced by an absolute path in menu files. Please refer to Debian Menu System section 3.2 and Bug#693477 for details. Visibility: warning Show-Always: no Check: menu-format
The package activates the ldconfig trigger even though no shared libraries are installed in a directory controlled by the dynamic library loader. Note this may be triggered by a bug in debhelper, that causes it to auto-generate an ldconfig trigger for packages that do not need it. Please refer to Debian Policy Manual section 8.1.1 and Bug#204975 for details. Visibility: warning Show-Always: no Check: libraries/shared/trigger/ldconfig
The package declares a relationship with itself. This is not very useful except in the case of a package Conflicting with itself if its package name doubles as a virtual package. Visibility: warning Show-Always: no Check: fields/package-relations
The "Section:" field in this package's control file is not one of the sections in use on the ftp archive. Valid sections are currently admin, comm, cli-mono, database, debug, devel, doc, editors, electronics, embedded, fonts, games, gnome, gnu-r, gnustep, graphics, hamradio, haskell, httpd, interpreters, java, javascript, kde, libdevel, libs, lisp, localization, kernel, mail, math, misc, net, news, ocaml, oldlibs, otherosfs, perl, php, python, ruby, rust, science, shells, sound, tex, text, utils, vcs, video, web, x11, xfce, zope. The section name should be preceded by "non-free/" if the package is in the non-free archive area, and by "contrib/" if the package is in the contrib archive area. Please refer to Debian Policy Manual section 2.4 for details. Visibility: warning Show-Always: no Check: fields/section
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/installpackage.sh:177]
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/autoconfighelper.sh:50]
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/installpackage.sh:33]
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/installpackage.sh:30]
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/installpackage.sh:167]
[opt/trinity/share/apps/kmyfirewall/scripts/installer/linux/kmfpkginstall.sh:15]
[opt/trinity/lib/libkmfcore.so.0.0.0]
[opt/trinity/lib/libkmfwidgets.so.0.0.0]
[opt/trinity/lib/trinity/libkmfcompiler_ipt.so]
[opt/trinity/lib/trinity/libkmfgenericinterfacepart.so]
[opt/trinity/lib/trinity/libkmfinstaller_linux.so]
[opt/trinity/lib/trinity/libkmfinstallerplugin.so]
[opt/trinity/lib/trinity/libkmfipteditorpart.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_custom.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_interface.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_ip.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_limit.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_mac.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_protocol.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_state.so]
[opt/trinity/lib/trinity/libkmfruleoptionedit_tos.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_log.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_mark.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_nat.so]
[opt/trinity/lib/trinity/libkmfruletargetoptionedit_tos.so]
This package ships a documentation file outside /usr/share/doc Documentation files are normally installed inside /usr/share/doc. If this file doesn't describe the contents or purpose of the directory it is in, please consider moving this file to /usr/share/doc/ or maybe even removing it. If this file does describe the contents or purpose of the directory it is in, please add a lintian override. Visibility: info Show-Always: no Check: documentation
The file is installed into a location that repeats the given path segment. An example would be /usr/lib/lib or /usr/share/myprogram/share. More often than not this is unintended. Please refer to Bug#950052 and Bug#950027 for details. Visibility: pedantic Show-Always: no Check: files/hierarchy/path-segments
The listed shared library calls the C library exit() or _exit() functions. In the case of an error, the library should instead return an appropriate error code to the calling program which can then determine how to handle the error, including performing any required clean-up. In most cases, removing the call should be discussed with upstream, particularly as it may produce an ABI change. Visibility: info Show-Always: no Check: libraries/shared/exit Renamed from: shlib-calls-exit This tag is experimental.
This is the compressor format used for the control.tar tarball. Visibility: classification Show-Always: no Check: deb-format This tag is a classification. There is no issue in your package.
This is the compressor format used for the data.tar tarball. Visibility: classification Show-Always: no Check: deb-format This tag is a classification. There is no issue in your package.
The maintainer scripts of the package contain one or more auto-generated shell snippets inserted by the listed debhelper tool. Visibility: classification Show-Always: no Check: maintainer-scripts/generated This tag is a classification. There is no issue in your package.
This person is a contact in the named group for this package. Visibility: classification Show-Always: no Check: fields/mail-address Renamed from: maintainer uploader This tag is a classification. There is no issue in your package.
[postinst]
[postrm]
The package is maintained by an individual according to the maintainer/uploaders fields in the debian/control file. Visibility: classification Show-Always: no Check: fields/vcs This tag is a classification. There is no issue in your package.
[Trinity]
The previous version of this package had a different version epoch to the current version but the upstream version did not go "backwards". For example, the previous package version was "1:1.0-1" and the current version is "2:2.0-1". This was likely an accidental bump or addition of an epoch. Epochs exist to cope with changes to the upstream version numbering scheme. Whilst they are a powerful tool, increasing or adding an epoch has many downsides including causing issues with versioned dependencies, being misleading to users and being aesthetically unappealing. Whilst they should be avoided, valid reasons to add or increment the epoch include: - Upstream changed their versioning scheme in a way that makes the latest version lower than the previous one. - You need to permanently revert to a lower upstream version. Temporary revertions (eg. after an NMU) should use not modify or introduce an epoch - please use the CURRENT+reallyFORMER until you can upload the latest version again. If you are unsure whether you need to increase the epoch for a package, please consult the debian-devel mailing list. Visibility: error Show-Always: no Check: debian/changelog
The version number of your source package ends in +b and a number or has a Debian revision containing three parts. These version numbers are used by binary NMUs and should not be used as the source version. (The +b form is the current standard; the three-part version number now obsolete.) Please refer to Debian Developer's Reference section 5.10.2.1 for details. Visibility: warning Show-Always: no Check: fields/version
The code in debian/rules requires a prerequisite that is not presently listed in the package's Build-Depends. In the special case of Python, affected packages should Build-Depend on one of python3, python3-all, python3-dev, or python3-all-dev. Which one depends on whether a package supports multiple Python versions, and also whether the package builds Python modules or uses Python only as part of the build process. Packages that depend on a specific Python version may build-depend on any appropriate pythonX.Y or pythonX.Y-dev package instead. The condition you see in the context is not a recommendation on what to add. If you see a list, more than likely only one member is needed to make this tag go away. You probably also do not need the :any multiarch acceptor, if you see one. Please refer to Debian Policy Manual section 4.2 for details. Visibility: error Show-Always: no Check: debian/rules Renamed from: missing-build-dependency missing-python-build-dependency
The previous version of this package had a different version epoch (eg. 2:1.0-1) to the current version but there's no reference to this in the changelog entry. Epochs exist to cope with changes to the upstream version numbering scheme. Whilst they are a powerful tool, increasing or adding an epoch has many downsides including causing issues with versioned dependencies, being misleading to users and being aesthetically unappealing. Whilst they should be avoided, valid reasons to add or increment the epoch include: - Upstream changed their versioning scheme in a way that makes the latest version lower than the previous one. - You need to permanently revert to a lower upstream version. Temporary revertions (eg. after an NMU) should use not modify or introduce an epoch - please use the CURRENT+reallyFORMER until you can upload the latest version again. If you are unsure whether you need to increase the epoch for a package, please consult the debian-devel mailing list. Lintian looks in this version's changelog entry for the phrase "epoch". Visibility: warning Show-Always: no Check: debian/changelog
This source package is not Debian-native but it does not have a debian/watch file. This file is used for automatic detection of new upstream versions by the Debian External Health Status project and other project infrastructure. If this package is maintained upstream, please consider adding a debian/watch file to detect new releases. If the package is not maintained upstream or if upstream uses a distribution mechanism that cannot be meaningfully monitored by uscan and the Debian External Health Status project, please consider adding a debian/watch file containing only comments documenting the situation. Please refer to Debian Policy Manual section 4.11 and the uscan(1) manual page for details. Visibility: info Show-Always: no Check: debian/watch
This package does not use the dh sequencer in debian/rules. While maintainers may use a variety of build systems, this one is by far the most popular. Maintainers are strongly encouraged to use the dh sequencer in new packages and convert existing ones when appropriate. Visibility: info Show-Always: no Check: debian/rules/dh-sequencer
The source package refers to a Standards-Version older than the one that was current at the time the package was created (according to the timestamp of the latest debian/changelog entry). Please consider updating the package to current Policy and setting this control field appropriately. If the package is already compliant with the current standards, you don't have to re-upload the package just to adjust the Standards-Version control field. However, please remember to update this field next time you upload the package. See /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the debian-policy package for a summary of changes in newer versions of Policy. Please refer to https://www.debian.org/doc/debian-policy/upgrading-checklist.html for details. Visibility: info Show-Always: no Check: fields/standards-version
This package does not use a machine-readable debian/copyright file. This format makes it easier to review licenses and can be easily parsed by Lintian. Please refer to https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for details. Visibility: pedantic Show-Always: no Check: debian/copyright/dep5
[debian/copyright]
This package uses a debhelper compatibility level that is no longer recommended. Please consider using the recommended level. For most packages, the best way to set the compatibility level is to specify debhelper-compat (= X) as a Build-Depends in debian/control. You can also use the debian/compat file or export DH_COMPAT in debian/rules. If no level is selected debhelper defaults to level 1, which is deprecated. Please refer to the debhelper(7) manual page for details. Visibility: pedantic Show-Always: no Check: debhelper
The field Rules-Requires-Root is missing from the file debian/control. Over time, Debian has sucessively narrowed the steps for which elevated privileges are required. It speeds up the building of installation packages in the archive. Eventually, Debian will switch the default archive-wide behaviour to expedite the build process further. Please declare explicitly that the sources do not require root privileges. You can use the setting Rules-Requires-Root: no in the source stanza of debian/control, but please verify with diffoscope(1) that the installation packages produced are in fact identical. Please refer to /usr/share/doc/dpkg/rootless-builds.txt.gz, Debian Policy Manual section 4.9.2, and Debian Policy Manual section 5.6.31 for details. Visibility: pedantic Show-Always: no Check: debian/control/field/rules-requires-root Renamed from: rules-requires-root-missing
[debian/control]
This source package is not Debian-native but it does not have a debian/upstream/metadata file. The Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to collect meta-information about upstream projects from any source package. This file is in YAML format and it is used in to feed the data in the UltimateDebianDatabase. For example, it can contains the way the authors want their software be cited in publications and some bibliographic references about the software. Please add a debian/upstream/metadata file. Please refer to https://dep-team.pages.debian.net/deps/dep12/ and https://wiki.debian.org/UpstreamMetadata for details. Visibility: pedantic Show-Always: no Check: debian/upstream/metadata This tag is experimental.
This is the debhelper compat level used specified by this package. Visibility: classification Show-Always: no Check: debhelper This tag is a classification. There is no issue in your package.
This is the build system that Lintian believes the package is using. Visibility: classification Show-Always: no Check: debhelper This tag is a classification. There is no issue in your package.
[debian/rules]
This person is a contact in the named group for this package. Visibility: classification Show-Always: no Check: fields/mail-address Renamed from: maintainer uploader This tag is a classification. There is no issue in your package.
The number of patches according to the debian/patches/series file. Visibility: classification Show-Always: no Check: debian/patches/count This tag is a classification. There is no issue in your package.
The package is maintained by an individual according to the maintainer/uploaders fields in the debian/control file. Visibility: classification Show-Always: no Check: fields/vcs This tag is a classification. There is no issue in your package.
This package uses the specified patch system (eg. "quilt" or "dpatch"). Visibility: classification Show-Always: no Check: debian/patches This tag is a classification. There is no issue in your package.
This is the source format declared in the package. Visibility: classification Show-Always: no Check: debian/source-dir This tag is a classification. There is no issue in your package.
The standards version of the package according to Standards-Version field in the debian/control file. Visibility: classification Show-Always: no Check: fields/standards-version This tag is a classification. There is no issue in your package.
[Trinity]
Lintian run for kmyfirewall-trinity package.
|
Name
|
|
|
|---|---|---|
| Source package | kmyfirewall-trinity_4:14.2.0~pre87-0ubuntu22.04.0+12 |
|
| System tar | system.tar.xz |
|
| Package upload | kmyfirewall-trinity_4:14.2.0~pre87-0ubuntu22.04.0+12 |
|
|
Name
|
|
|
|---|---|---|
| Lintian report | lintian: kmyfirewall-trinity | |
| Lintian report | lintian: kmyfirewall-trinity | |
| Debug log | debusine:work-request-debug-logs |
Work requests that must be completed before this one can run.
| 216408 | 1 week, 1 day | Worker | sbuild: kmyfirewall-trinity_4:14.2.0~pre87-0ubuntu22.04.0+12 (amd64) | Completed | Success |
This work request is not required by any other one.
Internal collection: workflow-215842
backend: unshare build_architecture: amd64 environment: debian/match:codename=jammy exclude_tags: [] fail_on_severity: error include_tags: [] input: binary_artifacts: - internal@collections/name:build-amd64 source_artifact: 720766@artifacts output: {} target_distribution: debian:jammy
backend: unshare build_architecture: amd64 environment: debian/match:codename=jammy exclude_tags: [] fail_on_severity: error include_tags: [] input: binary_artifacts: - internal@collections/name:build-amd64 source_artifact: 720766@artifacts output: {} target_distribution: debian:jammy task_configuration: 1021
provided: - task:group:debusine::Admins - task:group:debusine::TDE-Owners - task:scope:debusine - task:source-package:kmyfirewall-trinity - task:workspace:debusine:trinity-testing required: - worker:executor:unshare - worker:task:worker:lintian:version:1 - worker:type:external
configuration_context: jammy environment_id: 27656 input_binary_artifacts_ids: - 722666 input_source_artifact_id: 720766 parameter_summary: kmyfirewall-trinity_4:14.2.0~pre87-0ubuntu22.04.0+12 runtime_context: binary-all+binary-any+source:jammy subject: kmyfirewall-trinity
{ "step": "lintian-amd64", "display_name": "Lintian for amd64+all+source" }
{ "on_success": [ { "action": "update-collection-with-artifacts", "variables": null, "collection": "internal@collections", "name_template": "lintian-amd64", "artifact_filters": { "category": "debian:lintian" } } ] }
{ "runtime_statistics": { "memory": 237227008, "cpu_time": 53, "duration": 30, "cpu_count": 20, "disk_space": 4286337024, "available_memory": 33649803264, "available_disk_space": 16824901632 } }