1cmd: lintian --no-cfg --display-level '>=classification' --display-experimental --info --show-overrides '/tmp/debusine-fetch-exec-upload-l9u6pqi1/arts-trinity_14.2.0~pre56-0ubuntu20.04.0+9.dsc' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/arts-trinity-dbg_14.2.0~pre56-0ubuntu20.04.0+9_armhf.deb' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/arts-trinity_14.2.0~pre56-0ubuntu20.04.0+9_all.deb' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/libarts1-trinity-dev_14.2.0~pre56-0ubuntu20.04.0+9_armhf.deb' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/libarts1c2a-trinity_14.2.0~pre56-0ubuntu20.04.0+9_armhf.deb' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/libartsc0-trinity-dev_14.2.0~pre56-0ubuntu20.04.0+9_armhf.deb' '/tmp/debusine-fetch-exec-upload-l9u6pqi1/libartsc0-trinity_14.2.0~pre56-0ubuntu20.04.0+9_armhf.deb' 2output (contains stderr only, stdout was captured): 3 4Files in working directory: 5lintian.txt 6-------------------- 7E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artscat 8N: 9N: This package is Multi-Arch "same", but it installs an ELF binary in the 10N: directory that is not architecture-specific. 11N: 12N: Refer to https://wiki.ubuntu.com/MultiarchSpec for details. 13N: 14N: Severity: error 15N: 16N: Check: binaries 17N: 18E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artsd 19E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artsplay 20E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artsrec 21E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artsshell 22E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/bin/artswrapper 23E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartscbackend.so.0.0.0 24E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsdsp.so.0.0.0 25E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsdsp_st.so.0.0.0 26E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsflow.so.1.0.0 27E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsflow_idl.so.1.0.0 28E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsgslplayobject.so.0.0.0 29E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartswavplayobject.so.0.0.0 30E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libgmcop.so.1.0.0 31E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libkmedia2.so.1.0.0 32E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libkmedia2_idl.so.1.0.0 33E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libmcop.so.1.0.0 34E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libmcop_mt.so.1.0.0 35E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libqtmcop.so.1.0.0 36E: libarts1c2a-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libsoundserver_idl.so.1.0.0 37E: libartsc0-trinity: arch-dependent-file-not-in-arch-specific-directory opt/trinity/lib/libartsc.so.0.0.0 38E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/ 39N: 40N: Debian packages should not install into /opt, because it is reserved for 41N: add-on software. 42N: 43N: Refer to Filesystem Hierarchy Standard (/opt : Add-on application 44N: software packages) for details. 45N: 46N: Severity: error 47N: 48N: Check: files/hierarchy-standard 49N: 50E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/bin/ 51E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/bin/mcopidl 52E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/ 53E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/ 54E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/anyref.h 55E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/arts_export.h 56E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/artsflow.h 57E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/artsflow.idl 58E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/artsversion.h 59E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/asyncstream.h 60E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/audioio.h 61E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/audiosubsys.h 62E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/buffer.h 63E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/bufferqueue.h 64E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/cache.h 65E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/cachedwav.h 66E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/common.h 67E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/connect.h 68E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/connection.h 69E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/convert.h 70E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/core.h 71E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/core.idl 72E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/cpuinfo.h 73E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/datapacket.h 74E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/debug.h 75E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/delayedreturn.h 76E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/dispatcher.h 77E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/dynamicrequest.h 78E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/dynamicskeleton.h 79E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/extensionloader.h 80E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/factory.h 81E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/fft.h 82E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/flowsystem.h 83E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/giomanager.h 84E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/ 85E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslcommon.h 86E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslconfig.h 87E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslconvert.h 88E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldatacache.h 89E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldatahandle-mad.h 90E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldatahandle-vorbis.h 91E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldatahandle.h 92E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldatautils.h 93E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsldefs.h 94E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslengine.h 95E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslfft.h 96E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslfilter.h 97E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslieee754.h 98E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslloader.h 99E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslmagic.h 100E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslmath.h 101E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gsloscillator.h 102E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslosctable.h 103E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslsignal.h 104E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslwavechunk.h 105E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gsl/gslwaveosc.h 106E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/gslschedule.h 107E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/idlfilereg.h 108E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/ifacerepo_impl.h 109E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/iomanager.h 110E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/kmedia2.h 111E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/kmedia2.idl 112E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/mcopconfig.h 113E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/mcoputils.h 114E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/notification.h 115E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/object.h 116E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/objectmanager.h 117E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/pipebuffer.h 118E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/pool.h 119E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/qiomanager.h 120E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/reference.h 121E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/referenceclean.h 122E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/resample.h 123E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/socketconnection.h 124E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/soundserver.h 125E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/soundserver.idl 126E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/startupmanager.h 127E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/stdsynthmodule.h 128E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/synthschedule.h 129E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/tcpconnection.h 130E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/tcpserver.h 131E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/thread.h 132E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/type.h 133E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/unixconnection.h 134E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/unixserver.h 135E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/include/arts/weakreference.h 136E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/ 137E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartscbackend.so 138E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsdsp.la 139E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsdsp.so 140E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsdsp_st.la 141E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsdsp_st.so 142E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsflow.la 143E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsflow.so 144E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsflow_idl.la 145E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsflow_idl.so 146E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsgslplayobject.so 147E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartswavplayobject.so 148E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libgmcop.la 149E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libgmcop.so 150E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libkmedia2.so 151E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libkmedia2_idl.la 152E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libkmedia2_idl.so 153E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libmcop.la 154E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libmcop.so 155E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libmcop_mt.la 156E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libmcop_mt.so 157E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libqtmcop.la 158E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libqtmcop.so 159E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libsoundserver_idl.la 160E: libarts1-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libsoundserver_idl.so 161E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/ 162E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/ 163E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artscat 164E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artsd 165E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artsdsp 166E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artsplay 167E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artsrec 168E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artsshell 169E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/bin/artswrapper 170E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/ 171E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartscbackend.la 172E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartscbackend.so.0 173E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartscbackend.so.0.0.0 174E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsdsp.so.0 175E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsdsp.so.0.0.0 176E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsdsp_st.so.0 177E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsdsp_st.so.0.0.0 178E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsflow.so.1 179E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsflow.so.1.0.0 180E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsflow_idl.so.1 181E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsflow_idl.so.1.0.0 182E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsgslplayobject.la 183E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsgslplayobject.so.0 184E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartsgslplayobject.so.0.0.0 185E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartswavplayobject.la 186E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartswavplayobject.so.0 187E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libartswavplayobject.so.0.0.0 188E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libgmcop.so.1 189E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libgmcop.so.1.0.0 190E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libkmedia2.la 191E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libkmedia2.so.1 192E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libkmedia2.so.1.0.0 193E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libkmedia2_idl.so.1 194E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libkmedia2_idl.so.1.0.0 195E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libmcop.so.1 196E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libmcop.so.1.0.0 197E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libmcop_mt.so.1 198E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libmcop_mt.so.1.0.0 199E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libqtmcop.so.1 200E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libqtmcop.so.1.0.0 201E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libsoundserver_idl.so.1 202E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/libsoundserver_idl.so.1.0.0 203E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/ 204E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/ 205E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/DataHandlePlay.mcopclass 206E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/FileInputStream.mcopclass 207E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/GSLPlayObject.mcopclass 208E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_ADD.mcopclass 209E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_AMAN_PLAY.mcopclass 210E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_AMAN_RECORD.mcopclass 211E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_BUS_DOWNLINK.mcopclass 212E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_BUS_UPLINK.mcopclass 213E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_FREQUENCY.mcopclass 214E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_MUL.mcopclass 215E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_MULTI_ADD.mcopclass 216E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_PLAY.mcopclass 217E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_PLAY_WAV.mcopclass 218E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_RECORD.mcopclass 219E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/Synth_WAVE_SIN.mcopclass 220E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/WavPlayObject.mcopclass 221E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/Arts/WaveDataHandle.mcopclass 222E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/artsflow.mcopclass 223E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/artsflow.mcoptype 224E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/kmedia2.mcopclass 225E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/kmedia2.mcoptype 226E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/soundserver.mcopclass 227E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/lib/mcop/soundserver.mcoptype 228E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/share/ 229E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/share/man/ 230E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/share/man/man1/ 231E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/share/man/man1/artscat-trinity.1 232E: libarts1c2a-trinity: dir-or-file-in-opt opt/trinity/share/man/man1/artsdsp-trinity.1 233E: libartsc0-trinity: dir-or-file-in-opt opt/trinity/ 234E: libartsc0-trinity: dir-or-file-in-opt opt/trinity/lib/ 235E: libartsc0-trinity: dir-or-file-in-opt opt/trinity/lib/libartsc.so.0 236E: libartsc0-trinity: dir-or-file-in-opt opt/trinity/lib/libartsc.so.0.0.0 237E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/ 238E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/bin/ 239E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/bin/artsc-config 240E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/include/ 241E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/include/artsc/ 242E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/include/artsc/artsc.h 243E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/include/artsc/artsc_export.h 244E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/lib/ 245E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsc.la 246E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsc.so 247E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/lib/libartsgsl.a 248E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/share/ 249E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/share/man/ 250E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/share/man/man1/ 251E: libartsc0-trinity-dev: dir-or-file-in-opt opt/trinity/share/man/man1/artsc-config-trinity.1 252E: libarts1c2a-trinity: embedded-library opt/trinity/lib/libartsdsp_st.so.0.0.0: ltdl 253N: 254N: The given ELF object appears to have been statically linked to a 255N: library. Doing this is strongly discouraged due to the extra work needed 256N: by the security team to fix all the extra embedded copies or trigger the 257N: package rebuilds, as appropriate. 258N: 259N: If the package uses a modified version of the given library it is highly 260N: recommended to coordinate with the library's maintainer to include the 261N: changes on the system version of the library. 262N: 263N: Refer to Debian Policy Manual section 4.13 (Convenience copies of code) 264N: for details. 265N: 266N: Severity: error 267N: 268N: Check: binaries 269N: 270E: libarts1c2a-trinity: embedded-library opt/trinity/lib/libmcop.so.1.0.0: ltdl 271E: libartsc0-trinity: embedded-library opt/trinity/lib/libartsc.so.0.0.0: ltdl 272E: arts-trinity source: epoch-changed-but-upstream-version-did-not-go-backwards 1.5.10-0ubuntu3 -> 4:14.2.0~pre56-0ubuntu20.04.0+9 273N: 274N: The previous version of this package had a different version epoch to 275N: the current version but the upstream version did not go "backwards". For 276N: example, the previous package version was "1:1.0-1" and the current 277N: version is "2:2.0-1". 278N: 279N: This was likely an accidental bump or addition of an epoch. 280N: 281N: Epochs exist to cope with changes to the upstream version numbering 282N: scheme. Whilst they are a powerful tool, increasing or adding an epoch 283N: has many downsides including causing issues with versioned dependencies, 284N: being misleading to users and being aesthetically unappealing. Whilst 285N: they should be avoided, valid reasons to add or increment the epoch 286N: include: 287N: 288N: - Upstream changed their versioning scheme in a way that makes the 289N: latest version lower than the previous one. 290N: - You need to permanently revert to a lower upstream version. 291N: 292N: Temporary revertions (eg. after an NMU) should use not modify or 293N: introduce an epoch - please use the CURRENT+reallyFORMER until you can 294N: upload the latest version again. 295N: 296N: If you are unsure whether you need to increase the epoch for a package, 297N: please consult the debian-devel mailing list. 298N: 299N: Severity: error 300N: 301N: Check: debian/changelog 302N: 303E: arts-trinity source: missing-build-dependency cdbs 304N: 305N: The package doesn't specify a build dependency on a package that is used 306N: in debian/rules. 307N: 308N: Lintian intentionally does not take into account transitive 309N: dependencies. Even if the package build-depends on some package that in 310N: turn depends on the needed package, an explicit build dependency should 311N: be added. Otherwise, a latent bug is created that will appear without 312N: warning if the other package is ever updated to change its dependencies. 313N: Even if this seems unlikely, please always add explicit build 314N: dependencies on every non-essential, non-build-essential package that is 315N: used directly during the build. 316N: 317N: Refer to Debian Policy Manual section 4.2 (Package relationships) for 318N: details. 319N: 320N: Severity: error 321N: 322N: Check: debian/rules 323N: 324E: libarts1-trinity-dev: missing-dependency-on-libc needed by opt/trinity/bin/mcopidl 325N: 326N: The listed file appears to be linked against the C library, but the 327N: package doesn't depend on the C library package. Normally this indicates 328N: that ${shlibs:Depends} was omitted from the Depends line for this 329N: package in debian/control. 330N: 331N: All shared libraries and compiled binaries must be run through 332N: dpkg-shlibdeps to find out any libraries they are linked against (often 333N: via the dh_shlibdeps debhelper command). The package containing these 334N: files must then depend on ${shlibs:Depends} in debian/control to get the 335N: proper package dependencies for those libraries. 336N: 337N: Refer to Debian Policy Manual section 8.6.1 (Generating dependencies on 338N: shared libraries) for details. 339N: 340N: Severity: error 341N: 342N: Check: binaries 343N: 344X: libarts1-trinity-dev: missing-dependency-on-libstdc++ needed by opt/trinity/bin/mcopidl 345N: 346N: The listed file appears to be linked against the C++ library, but the 347N: package doesn't depend on the C++ library package. Normally this 348N: indicates that ${shlibs:Depends} was omitted from the Depends line for 349N: this package in debian/control. 350N: 351N: All shared libraries and compiled binaries must be run through 352N: dpkg-shlibdeps to find out any libraries they are linked against (often 353N: via the dh_shlibdeps debhelper command). The package containing these 354N: files must then depend on ${shlibs:Depends} in debian/control to get the 355N: proper package dependencies for those libraries. 356N: 357N: Refer to Debian Policy Manual section 8.6.1 (Generating dependencies on 358N: shared libraries) for details. 359N: 360N: Severity: error 361N: 362N: Check: binaries 363N: 364N: This tag is experimental. Please file a bug report if the tag seems 365N: wrong. 366N: 367E: libartsc0-trinity-dev: pkg-config-multi-arch-wrong-dir usr/lib/pkgconfig/artsc.pc full text contains architecture specific dir arm-linux-gnueabihf 368N: 369N: The arch all pkg-config file contains a reference to a multi-arch path. 370N: 371N: This can be usually be fixed by moving this file to a multi-arch path. 372N: 373N: Another likely cause is using debhelper 9 or newer (thus enabling 374N: multi-arch paths by default) on a package without multi-arch support. 375N: The usual cure in this case is to update it for multi-arch. 376N: 377N: Last but not least, this file could contain a reference to a cross 378N: architecture (like for instance an x86_64-linux-gnu pkg-config file 379N: referencing an i386-linux-gnu file). In this case the usual cure is to 380N: fix this path. 381N: 382N: Severity: error 383N: 384N: Check: files/pkgconfig 385N: 386E: arts-trinity source: version-substvar-for-external-package arts-trinity -> libarts1t64-trinity 387N: 388N: The first package has a relation on the second package using a 389N: dpkg-control substitution variable to generate the versioned part of the 390N: relation. However the second package is not built from this source 391N: package. Usually this means there is a mistake or typo in the package 392N: name in this dependency. 393N: 394N: Severity: error 395N: 396N: Check: debian/version-substvars 397N: 398W: arts-trinity source: ancient-standards-version 3.8.4 (released 2010-01-27) (current is 4.5.0) 399N: 400N: The source package refers to a Standards-Version that has been obsolete 401N: for more than two years. Please update your package to latest Policy and 402N: set this control field appropriately. 403N: 404N: If the package is already compliant with the current standards, you 405N: don't have to re-upload the package just to adjust the Standards-Version 406N: control field. However, please remember to update this field next time 407N: you upload the package. 408N: 409N: See /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the 410N: debian-policy package for a summary of changes in newer versions of 411N: Policy. 412N: 413N: Refer to 414N: https://www.debian.org/doc/debian-policy/upgrading-checklist.html for 415N: details. 416N: 417N: Severity: warning 418N: 419N: Check: fields/standards-version 420N: 421W: arts-trinity source: binary-nmu-debian-revision-in-source 4:14.2.0~pre56-0ubuntu20.04.0+9 422N: 423N: The version number of your source package ends in +b and a number or has 424N: a Debian revision containing three parts. These version numbers are used 425N: by binary NMUs and should not be used as the source version. (The +b 426N: form is the current standard; the three-part version number now 427N: obsolete.) 428N: 429N: Refer to Debian Developer's Reference section 5.10.2.1 (Recompilation or 430N: binary-only NMU) for details. 431N: 432N: Severity: warning 433N: 434N: Check: fields/version 435N: 436W: arts-trinity source: debhelper-but-no-misc-depends arts-trinity 437N: 438N: The source package uses debhelper, but it does not include 439N: ${misc:Depends} in the given binary package's debian/control entry. Any 440N: debhelper command may add dependencies to ${misc:Depends} that are 441N: required for the work that it does, so recommended best practice is to 442N: always add ${misc:Depends} to the dependencies of each binary package if 443N: debhelper is in use. 444N: 445N: Refer to the debhelper(7) manual page for details. 446N: 447N: Severity: warning 448N: 449N: Check: debhelper 450N: 451W: arts-trinity source: debhelper-but-no-misc-depends arts-trinity-dbg 452W: arts-trinity source: debhelper-but-no-misc-depends libarts1-trinity-dev 453W: arts-trinity source: debhelper-but-no-misc-depends libarts1c2a-trinity 454W: arts-trinity source: debhelper-but-no-misc-depends libartsc0-trinity 455W: arts-trinity source: debhelper-but-no-misc-depends libartsc0-trinity-dev 456W: arts-trinity source: debian-source-options-has-custom-compression-settings compression = "xz" (line 2) 457N: 458N: The debian/source/options file for this package specifies a custom 459N: compression level or algorithm. 460N: 461N: Whilst higher levels may reduce the size of big files, they have the 462N: side effect of consuming a lot of memory during both compression and 463N: extraction. This can not only also waste time unnecessarily, it can 464N: cause packages to FTBFS or even fail to install in resource-constrained 465N: environments or architectures. 466N: 467N: Please remove the call and let dpkg-deb(1) select suitable defaults. 468N: 469N: Refer to https://bugs.debian.org/829100 and the dpkg-deb(1) manual page 470N: for details. 471N: 472N: Severity: warning 473N: 474N: Check: debian/source-dir 475N: 476W: arts-trinity source: debian-source-options-has-custom-compression-settings compression-level = 9 (line 3) 477W: arts-trinity source: epoch-change-without-comment 1.5.10-0ubuntu3 -> 4:14.2.0~pre56-0ubuntu20.04.0+9 478N: 479N: The previous version of this package had a different version epoch (eg. 480N: 2:1.0-1) to the current version but there's no reference to this in the 481N: changelog entry. 482N: 483N: Epochs exist to cope with changes to the upstream version numbering 484N: scheme. Whilst they are a powerful tool, increasing or adding an epoch 485N: has many downsides including causing issues with versioned dependencies, 486N: being misleading to users and being aesthetically unappealing. Whilst 487N: they should be avoided, valid reasons to add or increment the epoch 488N: include: 489N: 490N: - Upstream changed their versioning scheme in a way that makes the 491N: latest version lower than the previous one. 492N: - You need to permanently revert to a lower upstream version. 493N: 494N: Temporary revertions (eg. after an NMU) should use not modify or 495N: introduce an epoch - please use the CURRENT+reallyFORMER until you can 496N: upload the latest version again. 497N: 498N: If you are unsure whether you need to increase the epoch for a package, 499N: please consult the debian-devel mailing list. 500N: 501N: Lintian looks in this version's changelog entry for the phrase "epoch". 502N: 503N: Severity: warning 504N: 505N: Check: debian/changelog 506N: 507W: libarts1-trinity-dev: package-has-unnecessary-activation-of-ldconfig-trigger 508N: 509N: The package activates the ldconfig trigger even though no shared 510N: libraries are installed in a directory controlled by the dynamic library 511N: loader. 512N: 513N: Note this may be triggered by a bug in debhelper, that causes it to 514N: auto-generate an ldconfig trigger for packages that do not need it. 515N: 516N: Refer to Debian Policy Manual section 8.1.1 (ldconfig) and 517N: https://bugs.debian.org/204975 for details. 518N: 519N: Severity: warning 520N: 521N: Check: shared-libs 522N: 523W: libarts1c2a-trinity: package-has-unnecessary-activation-of-ldconfig-trigger 524W: libartsc0-trinity: package-has-unnecessary-activation-of-ldconfig-trigger 525W: libartsc0-trinity-dev: package-has-unnecessary-activation-of-ldconfig-trigger 526W: arts-trinity: package-relation-with-self breaks: arts-trinity (<< 4:14.0.0~) 527N: 528N: The package declares a relationship with itself. This is not very useful 529N: except in the case of a package Conflicting with itself if its package 530N: name doubles as a virtual package. 531N: 532N: Severity: warning 533N: 534N: Check: fields/package-relations 535N: 536W: arts-trinity-dbg: package-relation-with-self breaks: arts-trinity-dbg (<< 4:14.0.0~) 537W: libarts1-trinity-dev: package-relation-with-self breaks: libarts1-trinity-dev (<< 4:14.0.0~) 538W: libarts1c2a-trinity: package-relation-with-self breaks: libarts1c2a-trinity (<< 4:14.0.0~) 539W: libartsc0-trinity: package-relation-with-self breaks: libartsc0-trinity (<< 4:14.0.0~) 540W: libartsc0-trinity-dev: package-relation-with-self breaks: libartsc0-trinity-dev (<< 4:14.0.0~) 541W: libartsc0-trinity-dev: pkg-config-unavailable-for-cross-compilation usr/lib/pkgconfig/arts.pc 542N: 543N: The specified pkg-config(1) file is installed to /usr/lib/pkgconfig. As 544N: the cross-compilation wrapper of pkg-config does not search this 545N: directory the file is unavailable under cross-compilation. 546N: 547N: Please install the file to /usr/lib/${DEB_HOST_MULTIARCH}/pkgconfig 548N: instead. 549N: 550N: For projects that use GNU Autotools, a simple method is moving to a 551N: debhelper compat level of 9 or higher. In the rare case that this file 552N: is architecture independent it can be installed to /usr/share/pkgconfig 553N: instead. 554N: 555N: Severity: warning 556N: 557N: Check: files/pkgconfig 558N: 559W: libartsc0-trinity-dev: pkg-config-unavailable-for-cross-compilation usr/lib/pkgconfig/artsc.pc 560W: arts-trinity-dbg: priority-extra-is-replaced-by-priority-optional 561N: 562N: Since Debian Policy version 4.0.1, the priority extra has been 563N: deprecated. 564N: 565N: Please update debian/control and replace all instances of Priority: 566N: extra with Priority: optional. 567N: 568N: Refer to Debian Policy Manual section 2.5 (Priorities) for details. 569N: 570N: Severity: warning 571N: 572N: Check: fields/priority 573N: 574W: arts-trinity: spelling-error-in-readme-debian root root (duplicate word) root 575N: 576N: Lintian found a spelling error in the README.Debian file. Lintian has a 577N: list of common misspellings that it looks for. It does not have a 578N: dictionary like a spelling checker does. 579N: 580N: Severity: warning 581N: 582N: Check: debian/readme 583N: 584W: libarts1-trinity-dev: spelling-error-in-readme-debian root root (duplicate word) root 585W: libarts1c2a-trinity: spelling-error-in-readme-debian root root (duplicate word) root 586I: arts-trinity source: binary-control-field-duplicates-source field "section" in package libarts1c2a-trinity 587N: 588N: In debian/control, this field for a binary package duplicates the value 589N: inherited from the source package paragraph. This doesn't hurt anything, 590N: but you may want to take advantage of the inheritance and set the value 591N: in only one place. It prevents missing duplicate places that need to be 592N: fixed if the value ever changes. 593N: 594N: Severity: info 595N: 596N: Check: debian/control 597N: 598I: arts-trinity source: binary-control-field-duplicates-source field "section" in package libartsc0-trinity 599I: arts-trinity source: debian-control-has-obsolete-dbg-package arts-trinity-dbg 600N: 601N: The debian/control file includes declaration of -dbg package. 602N: 603N: Debug package are now autogenerated avoiding waste of miror space. 604N: 605N: Please note that -dbg should be dropped from control file and must not 606N: be transitioned to a dummy package depending on -dbgsym. 607N: 608N: Refer to https://wiki.debian.org/AutomaticDebugPackages for details. 609N: 610N: Severity: info 611N: 612N: Check: debian/control 613N: 614I: arts-trinity source: debian-watch-file-is-missing 615N: 616N: This source package is not Debian-native but it does not have a 617N: debian/watch file. This file is used for automatic detection of new 618N: upstream versions by the Debian External Health Status project and other 619N: project infrastructure. If this package is maintained upstream, please 620N: consider adding a debian/watch file to detect new releases. 621N: 622N: If the package is not maintained upstream or if upstream uses a 623N: distribution mechanism that cannot be meaningfully monitored by uscan 624N: and the Debian External Health Status project, please consider adding a 625N: debian/watch file containing only comments documenting the situation. 626N: 627N: Refer to Debian Policy Manual section 4.11 (Optional upstream source 628N: location: debian/watch) and the uscan(1) manual page for details. 629N: 630N: Severity: info 631N: 632N: Check: debian/watch 633N: 634I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartscbackend.so.0.0.0 635N: 636N: This package provides an ELF binary that lacks the "bindnow" linker 637N: flag. 638N: 639N: This is needed (together with "relro") to make the "Global Offset Table" 640N: (GOT) fully read-only. The bindnow feature trades startup time for 641N: improved security. Please consider enabling this feature or consider 642N: overriding the tag (possibly with a comment about why). 643N: 644N: If you use dpkg-buildflags, you may have to add hardening=+bindnow or 645N: hardening=+all to DEB_BUILD_MAINT_OPTIONS. 646N: 647N: The relevant compiler flags are set in LDFLAGS. 648N: 649N: Refer to https://wiki.debian.org/Hardening for details. 650N: 651N: Severity: info 652N: 653N: Check: binaries 654N: 655I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartsdsp.so.0.0.0 656I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartsdsp_st.so.0.0.0 657I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartsflow.so.1.0.0 658I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartsflow_idl.so.1.0.0 659I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartsgslplayobject.so.0.0.0 660I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libartswavplayobject.so.0.0.0 661I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libgmcop.so.1.0.0 662I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libkmedia2.so.1.0.0 663I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libkmedia2_idl.so.1.0.0 664I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libmcop.so.1.0.0 665I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libmcop_mt.so.1.0.0 666I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libqtmcop.so.1.0.0 667I: libarts1c2a-trinity: hardening-no-bindnow opt/trinity/lib/libsoundserver_idl.so.1.0.0 668I: libartsc0-trinity: hardening-no-bindnow opt/trinity/lib/libartsc.so.0.0.0 669I: libarts1c2a-trinity: hardening-no-fortify-functions opt/trinity/bin/artsplay 670N: 671N: This package provides an ELF binary that lacks the use of fortified libc 672N: functions. Either there are no potentially unfortified functions called 673N: by any routines, all unfortified calls have already been fully validated 674N: at compile-time, or the package was not built with the default Debian 675N: compiler flags defined by dpkg-buildflags. If built using 676N: dpkg-buildflags directly, be sure to import CPPFLAGS. 677N: 678N: NB: Due to false-positives, Lintian ignores some unprotected functions 679N: (e.g. memcpy). 680N: 681N: Refer to https://wiki.debian.org/Hardening and 682N: https://bugs.debian.org/673112 for details. 683N: 684N: Severity: info 685N: 686N: Check: binaries 687N: 688I: arts-trinity source: no-dh-sequencer 689N: 690N: This package does not use the dh sequencer in debian/rules. 691N: 692N: While maintainers may use a variety of build systems, this one is by far 693N: the most popular. 694N: 695N: Maintainers are strongly encouraged to use the dh sequencer in new 696N: packages and convert existing ones when appropriate. 697N: 698N: Severity: info 699N: 700N: Check: debian/rules/dh-sequencer 701N: 702I: arts-trinity source: quilt-patch-missing-description 12_cleanup_artsc-config.diff 703N: 704N: quilt patch files should start with a description of patch. All lines 705N: before the start of the patch itself are considered part of the 706N: description. You can edit the description with quilt header -e when the 707N: patch is at the top of the stack. 708N: 709N: As well as a description of the purpose and function of the patch, the 710N: description should ideally contain author information, a URL for the bug 711N: report (if any), Debian or upstream bugs fixed by it, upstream status, 712N: the Debian version and date the patch was first included, and any other 713N: information that would be useful if someone were investigating the patch 714N: and underlying problem. Please consider using the DEP 3 format for this 715N: information. 716N: 717N: Refer to https://dep-team.pages.debian.net/deps/dep3/ for details. 718N: 719N: Severity: info 720N: 721N: Check: patch-systems 722N: 723X: libarts1c2a-trinity: shlib-calls-exit opt/trinity/lib/libmcop.so.1.0.0 724N: 725N: The listed shared library calls the C library exit() or _exit() 726N: functions. 727N: 728N: In the case of an error, the library should instead return an 729N: appropriate error code to the calling program which can then determine 730N: how to handle the error, including performing any required clean-up. 731N: 732N: In most cases, removing the call should be discussed with upstream, 733N: particularly as it may produce an ABI change. 734N: 735N: Severity: info 736N: 737N: Check: shared-libs 738N: 739N: This tag is experimental. Please file a bug report if the tag seems 740N: wrong. 741N: 742I: libarts1c2a-trinity: spelling-error-in-binary opt/trinity/lib/libartsflow.so.1.0.0 closeing closing 743N: 744N: Lintian found a spelling error in the given binary. Lintian has a list 745N: of common misspellings that it looks for. It does not have a dictionary 746N: like a spelling checker does. 747N: 748N: If the string containing the spelling error is translated with the help 749N: of gettext or a similar tool, please fix the error in the translations 750N: as well as the English text to avoid making the translations fuzzy. With 751N: gettext, for example, this means you should also fix the spelling 752N: mistake in the corresponding msgids in the *.po files. 753N: 754N: You can often find the word in the source code by running: 755N: 756N: grep -rw <word> <source-tree> 757N: 758N: This tag may produce false positives for words that contain non-ASCII 759N: characters due to limitations in strings. 760N: 761N: Severity: info 762N: 763N: Check: binaries 764N: 765I: arts-trinity source: testsuite-autopkgtest-missing 766N: 767N: This package does not declare a test suite. 768N: 769N: Having a test suite aids with automated quality assurance of the archive 770N: outside of your package. For example, if your package has a test suite 771N: it is possible to re-run that test suite when any of your package's 772N: dependencies have a new version and check whether that update causes 773N: problems for your package. 774N: 775N: In addition, since May 2018 these tests now influence migration from 776N: unstable to testing: 777N: 778N: https://lists.debian.org/debian-devel-announce/2018/05/msg00001.html 779N: 780N: Please add a debian/tests/control file to your package to declare a 781N: testsuite, but please make sure to only add autopkgtests if they provide 782N: meaningful coverage of your package. 783N: 784N: Refer to https://ci.debian.net/doc/ for details. 785N: 786N: Severity: info 787N: 788N: Check: testsuite 789N: 790I: arts-trinity-dbg: wrong-section-according-to-package-name arts-trinity-dbg => debug 791N: 792N: This package has a name suggesting that it belongs to a section other 793N: than the one it is currently categorized in. 794N: 795N: Severity: info 796N: 797N: Check: fields/section 798N: 799P: arts-trinity source: co-maintained-package-with-no-vcs-fields 800N: 801N: Based on the content of the maintainer and uploader fields this package 802N: is co-maintained but there are no Vcs-* fields. 803N: 804N: It is recommended that shared maintenance of packages are co-ordinated 805N: via a revision control system. 806N: 807N: Severity: pedantic 808N: 809N: Check: fields/vcs 810N: 811P: arts-trinity: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 812N: 813N: The copyright file refers to the versionless symlink in 814N: /usr/share/common-licenses for the full text of the GPL, LGPL, or GFDL 815N: license. This symlink is updated to point to the latest version of the 816N: license when a new one is released. The package appears to allow 817N: relicensing under later versions of its license, so this is legally 818N: consistent, but it implies that Debian will relicense the package under 819N: later versions of those licenses as they're released. It is normally 820N: better to point to the version of the license the package references in 821N: its license statement. 822N: 823N: For example, if the package says something like "you may redistribute it 824N: and/or modify it under the terms of the GNU General Public License as 825N: published by the Free Software Foundation; either version 2, or (at your 826N: option) any later version", the debian/copyright file should refer to 827N: /usr/share/common-licenses/GPL-2, not /GPL. 828N: 829N: For packages released under the same terms as Perl, Perl references the 830N: GPL version 1, so point to /usr/share/common-licenses/GPL-1. 831N: 832N: Severity: pedantic 833N: 834N: Check: debian/copyright 835N: 836P: arts-trinity-dbg: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 837P: libarts1-trinity-dev: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 838P: libarts1c2a-trinity: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 839P: libartsc0-trinity: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 840P: libartsc0-trinity-dev: copyright-refers-to-symlink-license usr/share/common-licenses/GPL 841P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 107) 842N: 843N: This file appears to contain one or more lines with trailing whitespace 844N: characters. 845N: 846N: Whilst typically harmless and merely unsightly, they can often cause 847N: difficult-to-spot issues where tools interpret the whitespace characters 848N: literally as well as introduce unnecessary diff(1) noise. They are thus 849N: best avoided in their entirity. 850N: 851N: Whitespace at the end of lines may be removed with the following: 852N: 853N: $ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog 854N: 855N: If you use Emacs, you can also use "M-x wh-cl" (whitespace-cleanup). 856N: 857N: However, if you wish to only remove trailing spaces and leave trailing 858N: tabs (eg. for Makefiles), you can use the following code snippet: 859N: 860N: $ sed -i -e 's@[ ]*$@@g' debian/rules 861N: 862N: To remove empty lines from the end of a file, you can use: 863N: 864N: $ sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' debian/rules 865N: 866N: Severity: pedantic 867N: 868N: Check: cruft 869N: 870P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 109) 871P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 194) 872P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 196) 873P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 333) 874P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 630) 875P: arts-trinity source: file-contains-trailing-whitespace debian/changelog (line 66) 876P: arts-trinity source: no-dep5-copyright 877N: 878N: This package does not use a machine-readable debian/copyright file. 879N: 880N: This format makes it easier to review licenses and can be easily parsed 881N: by Lintian. 882N: 883N: Refer to 884N: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for 885N: details. 886N: 887N: Severity: pedantic 888N: 889N: Check: debian/copyright 890N: 891P: arts-trinity source: no-homepage-field 892N: 893N: This non-native package lacks a Homepage field. If the package has an 894N: upstream home page that contains useful information or resources for the 895N: end user, consider adding a Homepage control field to debian/control. 896N: 897N: Refer to Debian Policy Manual section 5.6.23 (Homepage) for details. 898N: 899N: Severity: pedantic 900N: 901N: Check: fields/homepage 902N: 903P: arts-trinity source: package-does-not-install-examples examples/ 904N: 905N: The original source tarball contains the specified examples directory. 906N: However, no examples are installed in any binary packages. 907N: 908N: Please use dh_installexamples to install these to the most relevant 909N: package, for example by adding the directory name followed by a wildcard 910N: to a debian/pkgname.examples file. 911N: 912N: Lintian looks for any directory called examples under /usr/share/doc in 913N: all binary packages. 914N: 915N: Refer to the dh_installexamples(1) manual page for details. 916N: 917N: Severity: pedantic 918N: 919N: Check: cruft 920N: 921P: arts-trinity source: package-uses-old-debhelper-compat-version 10 922N: 923N: The debhelper compatibility version used by this package is marked as 924N: not recommended by the debhelper developer. You may consider using a 925N: recommended compatibility version. 926N: 927N: The compatibility version can be set by specifying debhelper-compat (= 928N: 12) in your package's Build-Depends, by the legacy debian/compat file or 929N: even by setting and exporting DH_COMPAT in debian/rules. If it is not 930N: set in either place, debhelper defaults to the deprecated compatibility 931N: version 1. 932N: 933N: Refer to the debhelper(7) manual page for details. 934N: 935N: Severity: pedantic 936N: 937N: Check: debhelper 938N: 939P: arts-trinity source: rules-requires-root-missing 940N: 941N: The debian/control file is missing an explicit Rules-Requires-Root 942N: field. 943N: 944N: Traditionally, Debian packages have required root privileges for some 945N: debian/rules target requiring a split between build and binary targets. 946N: This makes the builds slower due to the increased amount of invocations 947N: as well as the overhead of fakeroot itself. 948N: 949N: Please specify (eg.) Rules-Requires-Root: no in the debian/control 950N: source stanza, but packagers should verify using diffoscope(1) that the 951N: binaries built with this field present are identical. 952N: 953N: Refer to /usr/share/doc/dpkg-dev/rootless-builds.txt.gz, Debian Policy 954N: Manual section 4.9.2 (debian/rules and Rules-Requires-Root), and Debian 955N: Policy Manual section 5.6.31 (Rules-Requires-Root) for details. 956N: 957N: Severity: pedantic 958N: 959N: Check: debian/control 960N: 961X: arts-trinity source: upstream-metadata-file-is-missing 962N: 963N: This source package is not Debian-native but it does not have a 964N: debian/upstream/metadata file. 965N: 966N: The Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort 967N: to collect meta-information about upstream projects from any source 968N: package. This file is in YAML format and it is used in to feed the data 969N: in the UltimateDebianDatabase. For example, it can contains the way the 970N: authors want their software be cited in publications and some 971N: bibliographic references about the software. 972N: 973N: Please add a debian/upstream/metadata file. 974N: 975N: Refer to https://dep-team.pages.debian.net/deps/dep12/ and 976N: https://wiki.debian.org/UpstreamMetadata for details. 977N: 978N: Severity: pedantic 979N: 980N: Check: debian/upstream/metadata 981N: 982N: This tag is experimental. Please file a bug report if the tag seems 983N: wrong. 984N: 985C: arts-trinity: control-tarball-compression-format xz 986N: 987N: This is the compressor format used for the control.tar tarball. 988N: 989N: Severity: classification 990N: 991N: Check: deb-format 992N: 993N: This tag is a classification. There is no issue in your package. 994N: 995C: arts-trinity-dbg: control-tarball-compression-format xz 996C: libarts1-trinity-dev: control-tarball-compression-format xz 997C: libarts1c2a-trinity: control-tarball-compression-format xz 998C: libartsc0-trinity: control-tarball-compression-format xz 999C: libartsc0-trinity-dev: control-tarball-compression-format xz 1000C: arts-trinity: data-tarball-compression-format xz 1001N: 1002N: This is the compressor format used for the data.tar tarball. 1003N: 1004N: Severity: classification 1005N: 1006N: Check: deb-format 1007N: 1008N: This tag is a classification. There is no issue in your package. 1009N: 1010C: arts-trinity-dbg: data-tarball-compression-format xz 1011C: libarts1-trinity-dev: data-tarball-compression-format xz 1012C: libarts1c2a-trinity: data-tarball-compression-format xz 1013C: libartsc0-trinity: data-tarball-compression-format xz 1014C: libartsc0-trinity-dev: data-tarball-compression-format xz 1015C: arts-trinity source: debhelper-compat-level 10 1016N: 1017N: This is the debhelper compat level used specified by this package. 1018N: 1019N: Severity: classification 1020N: 1021N: Check: debhelper 1022N: 1023N: This tag is a classification. There is no issue in your package. 1024N: 1025C: arts-trinity source: debian-build-system cdbs-with-debhelper.mk, debhelper 1026N: 1027N: This is the build system that Lintian believes the package is using. 1028N: 1029N: Severity: classification 1030N: 1031N: Check: debhelper 1032N: 1033N: This tag is a classification. There is no issue in your package. 1034N: 1035C: arts-trinity: no-ctrl-scripts 1036N: 1037N: The package does not rely on any maintainer scripts (or other executable 1038N: control files). 1039N: 1040N: Severity: classification 1041N: 1042N: Check: control-files 1043N: 1044N: This tag is a classification. There is no issue in your package. 1045N: 1046C: arts-trinity-dbg: no-ctrl-scripts 1047C: libarts1-trinity-dev: no-ctrl-scripts 1048C: libarts1c2a-trinity: no-ctrl-scripts 1049C: libartsc0-trinity: no-ctrl-scripts 1050C: libartsc0-trinity-dev: no-ctrl-scripts 1051C: arts-trinity source: package-is-co-maintained 4 1052N: 1053N: The package is co-maintained but not team-maintained according to the 1054N: maintainer/uploaders fields in the debian/control file. 1055N: 1056N: Severity: classification 1057N: 1058N: Check: fields/vcs 1059N: 1060N: This tag is a classification. There is no issue in your package. 1061N: 1062C: arts-trinity: package-is-maintained-by-individual 1063N: 1064N: The package is maintained by an individual according to the 1065N: maintainer/uploaders fields in the debian/control file. 1066N: 1067N: Severity: classification 1068N: 1069N: Check: fields/vcs 1070N: 1071N: This tag is a classification. There is no issue in your package. 1072N: 1073C: arts-trinity-dbg: package-is-maintained-by-individual 1074C: libarts1-trinity-dev: package-is-maintained-by-individual 1075C: libarts1c2a-trinity: package-is-maintained-by-individual 1076C: libartsc0-trinity: package-is-maintained-by-individual 1077C: libartsc0-trinity-dev: package-is-maintained-by-individual 1078C: arts-trinity source: patch-system quilt 1079N: 1080N: This package uses the specified patch system (eg. "quilt" or "dpatch"). 1081N: 1082N: Severity: classification 1083N: 1084N: Check: patch-systems 1085N: 1086N: This tag is a classification. There is no issue in your package. 1087N: 1088C: arts-trinity source: source-format 3.0 (quilt) 1089N: 1090N: This is the source format declared in the package. 1091N: 1092N: Severity: classification 1093N: 1094N: Check: debian/source-dir 1095N: 1096N: This tag is a classification. There is no issue in your package. 1097N: 1098C: arts-trinity source: standards-version 3.8.4 1099N: 1100N: The standards version of the package according to Standards-Version 1101N: field in the debian/control file. 1102N: 1103N: Severity: classification 1104N: 1105N: Check: fields/standards-version 1106N: 1107N: This tag is a classification. There is no issue in your package. 1108N: 1109 1110--------------------