cmd-output.log

cmd: lintian --no-cfg --display-level '>=classification' --display-experimental --info --show-overrides '/tmp/debusine-fetch-exec-upload-zkb8n0xj/akode_14.2.0~pre14-0ubuntu25.10.0+9.dsc' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/akode-dbg_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode-dev_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2-bin_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2-ffmpeg_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2-jack_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2-mpeg_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2-pulse_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb' '/tmp/debusine-fetch-exec-upload-zkb8n0xj/libakode2_14.2.0~pre14-0ubuntu25.10.0+9_amd64.deb'
output (contains stderr only, stdout was captured):

Files in working directory:
lintian.txt
--------------------
N:
I: akode source: adopted-extended-field (in section for source) XSBC-Original-Maintainer [debian/control:5]
N: 
N:   A field in debian/control has an extension prefix but is also known
N:   without it.
N:   
N:   Extension prefixes like XS-* or XC-* allow experimental fields to
N:   propagate to the right place when packages are built with dpkg. In this
N:   case, however, the field is also known without the prefix. In all
N:   likelihood the field was permanently adopted, and dpkg learned how to deal
N:   with it.
N:   
N:   Please consider removing the extension prefix for the field name.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/adopted
N:   Renamed from: xc-package-type-in-debian-control
N:   xs-testsuite-field-in-debian-control xs-vcs-field-in-debian-control
N: 
N:
I: libakode2-bin: conflicts-with-version libakode2 (<< 4:14.1.6~)
N: 
N:   An earlier-than version clause is normally an indication that Breaks
N:   should be used instead of Conflicts. Breaks is a weaker requirement that
N:   provides the package manager more leeway to find a valid upgrade path.
N:   Conflicts should only be used if two packages can never be unpacked at the
N:   same time, or for some situations involving virtual packages (where a
N:   version clause is not appropriate). In particular, when moving files
N:   between packages, use Breaks plus Replaces, not Conflicts plus Replaces.
N: 
N:   Please refer to Conflicting binary packages - Conflicts (Section 7.4) in
N:   the Debian Policy Manual for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/package-relations
N: 
N:
I: akode source: debian-control-has-obsolete-dbg-package (in section for akode-dbg) Package [debian/control:116]
N: 
N:   The debian/control file declares a -dbg package.
N:   
N:   Debug packages are now generated automatically. It reduces the space
N:   requirements for archive mirrors for regular operations.
N:   
N:   Please drop the -dbg package the debian/control file. Do not change it to
N:   a dummy package that depends on the -dbgsym package.
N: 
N:   Please refer to https://wiki.debian.org/AutomaticDebugPackages for
N:   details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debug/obsolete
N: 
N:
I: akode source: debian-watch-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/watch file. This file is used for automatic detection of new
N:   upstream versions by the Debian External Health Status project and other
N:   project infrastructure. If this package is maintained upstream, please
N:   consider adding a debian/watch file to detect new releases.
N:   
N:   If the package is not maintained upstream or if upstream uses a
N:   distribution mechanism that cannot be meaningfully monitored by uscan and
N:   the Debian External Health Status project, please consider adding a
N:   debian/watch file containing only comments documenting the situation.
N: 
N:   Please refer to Upstream source location: debian/watch (Section 4.11) in
N:   the Debian Policy Manual and the uscan(1) manual page for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/watch
N: 
N:
I: akode source: duplicate-short-description libakode2 libakode2-bin [debian/control]
N: 
N:   The listed binary packages all share the same short description, i.e. the
N:   first line of the Description field in debian/control.
N:   
N:   Please add a word or two, in parentheses if needed, to describe to users
N:   what they are installing.
N:   
N:   It is not okay to rely solely on package naming conventions to indicate
N:   what is inside.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/description/duplicate
N: 
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode.so.2.0.0]
N: 
N:   This package provides an ELF binary that lacks the "bindnow" linker flag.
N:   
N:   This is needed (together with "relro") to make the "Global Offset Table"
N:   (GOT) fully read-only. The bindnow feature trades startup time for
N:   improved security. Please consider enabling this feature or consider
N:   overriding the tag (possibly with a comment about why).
N:   
N:   If you use dpkg-buildflags, you may have to add hardening=+bindnow or
N:   hardening=+all to DEB_BUILD_MAINT_OPTIONS.
N:   
N:   The relevant compiler flags are set in LDFLAGS.
N: 
N:   Please refer to https://wiki.debian.org/Hardening for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: binaries/hardening
N: 
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_alsa_sink.so]
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_mpc_decoder.so]
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_oss_sink.so]
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_src_resampler.so]
N:
I: libakode2: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_xiph_decoder.so]
N:
I: libakode2-ffmpeg: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_ffmpeg_decoder.so]
N:
I: libakode2-jack: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_jack_sink.so]
N:
I: libakode2-mpeg: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_mpeg_decoder.so]
N:
I: libakode2-pulse: hardening-no-bindnow [usr/lib/x86_64-linux-gnu/libakode_pulse_sink.so]
N:
I: libakode2: hardening-no-fortify-functions [usr/lib/x86_64-linux-gnu/libakode.so.2.0.0]
N: 
N:   This package provides an ELF binary that lacks the use of fortified libc
N:   functions. Either there are no potentially unfortified functions called by
N:   any routines, all unfortified calls have already been fully validated at
N:   compile-time, or the package was not built with the default Debian
N:   compiler flags defined by dpkg-buildflags. If built using dpkg-buildflags
N:   directly, be sure to import CPPFLAGS.
N:   
N:   NB: Due to false-positives, Lintian ignores some unprotected functions
N:   (e.g. memcpy).
N: 
N:   Please refer to https://wiki.debian.org/Hardening and Bug#673112 for
N:   details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: binaries/hardening
N: 
N:
I: akode source: installable-field-mirrors-source (in section for akode-dbg) Priority [debian/control:119]
N: 
N:   The named field for an installation package in debian/control has the same
N:   value as the one inherited from the source paragraph.
N:   
N:   In the interest of shorter and clearer files, you may wish to take
N:   advantage of the inheritance rules. This field is redundant.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/redundant
N:   Renamed from: binary-control-field-duplicates-source
N: 
N:
I: akode source: no-dh-sequencer [debian/rules]
N: 
N:   This package does not use the dh sequencer in debian/rules.
N:   
N:   While maintainers may use a variety of build systems, this one is by far
N:   the most popular.
N:   
N:   Maintainers are strongly encouraged to use the dh sequencer in new
N:   packages and convert existing ones when appropriate.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/rules/dh-sequencer
N: 
N:
I: libakode2: no-symbols-control-file usr/lib/x86_64-linux-gnu/libakode.so.2.0.0
N: 
N:   Although the package includes a shared library, the package does not have
N:   a symbols control file.
N:   
N:   dpkg can use symbols files in order to generate more accurate library
N:   dependencies for applications, based on the symbols from the library that
N:   are actually used by the application.
N: 
N:   Please refer to the dpkg-gensymbols(1) manual page and
N:   https://wiki.debian.org/UsingSymbolsFiles for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/shlibs
N: 
N:
I: akode source: out-of-date-standards-version 3.7.3 (released 2007-12-03) (current is 4.7.2)
N: 
N:   The source package refers to a Standards-Version older than the one that
N:   was current at the time the package was created (according to the
N:   timestamp of the latest debian/changelog entry). Please consider updating
N:   the package to current Policy and setting this control field
N:   appropriately.
N:   
N:   If the package is already compliant with the current standards, you don't
N:   have to re-upload the package just to adjust the Standards-Version control
N:   field. However, please remember to update this field next time you upload
N:   the package.
N:   
N:   See /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the
N:   debian-policy package for a summary of changes in newer versions of
N:   Policy.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/debian-policy/upgrading-checklist.html for
N:   details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/standards-version
N: 
N:
I: libakode-dev: spelling-error-in-description runing running
N: 
N:   Lintian found a spelling error in the package description. Lintian has a
N:   list of common misspellings that it looks for. It does not have a
N:   dictionary like a spelling checker does. It is particularly picky about
N:   spelling and capitalization in package descriptions since they're very
N:   visible to end users.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/description
N: 
N:
I: libakode2: spelling-error-in-description runing running
N:
I: libakode2-bin: spelling-error-in-description runing running
N:
I: libakode2-ffmpeg: spelling-error-in-description runing running
N:
I: libakode2-jack: spelling-error-in-description runing running
N:
I: libakode2-mpeg: spelling-error-in-description runing running
N:
I: libakode2-pulse: spelling-error-in-description runing running
N:
I: akode source: unused-override unknown-field Original-Maintainer [debian/source/lintian-overrides:12]
N: 
N:   Your package specifies the named override but there were no tags that
N:   could have been silenced by it.
N:   
N:   Maybe you fixed an underlying condition but forgot to remove the override.
N:   It is also possible that the Lintian maintainers fixed a false positive.
N:   
N:   If the override is now unused, please remove it.
N:   
N:   This tag is similar to mismatched-override except there a tag could have
N:   been silenced if the context had matched.
N:   
N:   Sometimes, overrides end up not being used because a tag appears only on
N:   some architectures. In that case, overrides can be equipped with an
N:   architecture qualifier.
N: 
N:   Please refer to Architecture specific overrides (Section 2.4.3) in the
N:   Lintian User's Manual for details.
N: 
N:   Visibility: info
N:   Show-Always: yes
N:   Check: lintian
N: 
N:
I: akode-dbg: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/akode-dbg:2]
N:
I: libakode-dev: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode-dev:5]
N:
I: libakode2: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2:9]
N:
I: libakode2-bin: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2-bin:5]
N:
I: libakode2-ffmpeg: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2-ffmpeg:5]
N:
I: libakode2-jack: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2-jack:5]
N:
I: libakode2-mpeg: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2-mpeg:5]
N:
I: libakode2-pulse: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/libakode2-pulse:5]
N:
I: akode-dbg: wrong-section-according-to-package-name libdevel => debug
N: 
N:   This package has a name suggesting that it belongs to a section other than
N:   the one it is currently categorized in.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/section
N: 
N:
P: akode source: co-maintained-package-with-no-vcs-fields
N: 
N:   Based on the content of the maintainer and uploader fields this package is
N:   co-maintained but there are no Vcs-* fields.
N:   
N:   It is recommended that shared maintenance of packages are co-ordinated via
N:   a revision control system.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: fields/vcs
N:   Renamed from: co-maintained-package-with-no-vcs-headers
N: 
N:
P: akode source: no-dep5-copyright [debian/copyright]
N: 
N:   This package does not use a machine-readable debian/copyright file.
N:   
N:   This format makes it easier to review licenses and can be easily parsed by
N:   Lintian.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/copyright/dep5
N: 
N:
P: akode source: no-homepage-field
N: 
N:   This non-native package lacks a Homepage field. If the package has an
N:   upstream home page that contains useful information or resources for the
N:   end user, consider adding a Homepage control field to debian/control.
N: 
N:   Please refer to Homepage (Section 5.6.23) in the Debian Policy Manual for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: fields/homepage
N: 
N:
P: libakode-dev: old-style-config-script [usr/bin/akode-config]
N: 
N:   The following file is an old style config file, used to retrieve
N:   information about installed libraries in the system. It is typically used
N:   to compile and link against one or more libraries.
N:   
N:   Using this kind of system to pass compile file is obsolete and will likely
N:   introduce bugs in a multi-arch system. Particularly, this kind of script
N:   could only belong to a package that is not Multi-Arch.
N:   
N:   You should consider to move to pkg-config file and warn your user to not
N:   use this script, and open a bug upstream.
N:   
N:   You should also consider to implement this file as a compatibility wrapper
N:   over pkg-config.
N:   
N:   After fixing every reverse depends of your package and use pkg-config
N:   reverse depends makefile, you should consider to put this script, as a
N:   temporary convenience of your users, under
N:   /usr/lib/$DEB_HOST_MULTIARCH/$PACKAGE/bin where $DEB_HOST_MULTIARCH is the
N:   multi-arch triplet and $PACKAGE is the package name. You should also
N:   consider to add a NEWS.Debian entry.
N: 
N:   Please refer to the pkg-config(1) manual page and
N:   http://sources.debian.net/src/imagemagick/8:6.8.9.9-6/debian/NEWS/ for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: files/config-scripts
N: 
N:
P: akode source: package-uses-old-debhelper-compat-version 10
N: 
N:   This package uses a debhelper compatibility level that is no longer
N:   recommended. Please consider using the recommended level.
N:   
N:   For most packages, the best way to set the compatibility level is to
N:   specify debhelper-compat (= X) as a Build-Depends in debian/control. You
N:   can also use the debian/compat file or export DH_COMPAT in debian/rules.
N:   
N:   If no level is selected debhelper defaults to level 1, which is
N:   deprecated.
N: 
N:   Please refer to the debhelper(7) manual page for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debhelper
N: 
N:
P: akode source: redundant-control-relation (in section for libakode-dev) Depends libflac-dev, libflac-dev (>= 1.1.1-3) [debian/control:106]
N: 
N:   The named field in the debian/control file lists multiple package
N:   relationships when one would be sufficient.
N:   
N:   The less restrictive declaration can be removed. The tools dpkg-source and
N:   dpkg-gencontrol do that automatically, so it does not affect the package
N:   generated from this source.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/control/field/relation
N:   Renamed from: duplicate-in-relation-field
N: 
N:
P: akode source: trailing-whitespace [debian/changelog:112]
N: 
N:   This file contains lines with trailing whitespace characters.
N:   
N:   Whilst often harmless and unsightly, such extra whitespaces can also cause
N:   tools to interpret the whitespace characters literally. The tool diff(1)
N:   does not like them, either. They are best avoided.
N:   
N:   Some of these problems can be hard to track down.
N:   
N:   Whitespace at the end of lines may be removed with the following:
N:   
N:    $ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog
N:   
N:   If you use Emacs, you can also use "M-x wh-cl" (whitespace-cleanup).
N:   
N:   However, if you wish to only remove trailing spaces and leave trailing
N:   tabs (eg. for Makefiles), you can use the following code snippet:
N:   
N:    $ sed -i -e 's@[ ]*$@@g' debian/rules
N:   
N:   To remove empty lines from the end of a file, you can use:
N:   
N:    $ sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' debian/rules
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/trailing-whitespace
N:   Renamed from: file-contains-trailing-whitespace
N: 
N:
P: akode source: trailing-whitespace [debian/changelog:79]
N:
X: akode source: upstream-metadata-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/upstream/metadata file.
N:   
N:   The Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to
N:   collect meta-information about upstream projects from any source package.
N:   This file is in YAML format and it is used in to feed the data in the
N:   UltimateDebianDatabase. For example, it can contains the way the authors
N:   want their software be cited in publications and some bibliographic
N:   references about the software.
N:   
N:   Please add a debian/upstream/metadata file.
N: 
N:   Please refer to https://dep-team.pages.debian.net/deps/dep12/ and
N:   https://wiki.debian.org/UpstreamMetadata for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/upstream/metadata
N:   This tag is experimental.
N: 
N:
C: akode-dbg: control-tarball-compression-format zst
N: 
N:   This is the compressor format used for the control.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libakode-dev: control-tarball-compression-format zst
N:
C: libakode2: control-tarball-compression-format zst
N:
C: libakode2-bin: control-tarball-compression-format zst
N:
C: libakode2-ffmpeg: control-tarball-compression-format zst
N:
C: libakode2-jack: control-tarball-compression-format zst
N:
C: libakode2-mpeg: control-tarball-compression-format zst
N:
C: libakode2-pulse: control-tarball-compression-format zst
N:
C: akode-dbg: data-tarball-compression-format zst
N: 
N:   This is the compressor format used for the data.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libakode-dev: data-tarball-compression-format zst
N:
C: libakode2: data-tarball-compression-format zst
N:
C: libakode2-bin: data-tarball-compression-format zst
N:
C: libakode2-ffmpeg: data-tarball-compression-format zst
N:
C: libakode2-jack: data-tarball-compression-format zst
N:
C: libakode2-mpeg: data-tarball-compression-format zst
N:
C: libakode2-pulse: data-tarball-compression-format zst
N:
C: akode source: debhelper-compat-level 10
N: 
N:   This is the debhelper compat level used specified by this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: debian-build-system cdbs-with-debhelper.mk [debian/rules]
N: 
N:   This is the build system that Lintian believes the package is using.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N: 
N:   This person is a contact in the named group for this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/mail-address
N:   Renamed from: maintainer uploader
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: mail-contact Uploaders "Adeodato Simó" <dato@net.com.org.es>
N:
C: akode source: mail-contact Uploaders "Christopher Martin" <chrsmrtn@debian.org>
N:
C: akode source: mail-contact Uploaders "Isaac Clerencia" <isaac@debian.org>
N:
C: akode-dbg: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode-dev: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2-bin: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2-ffmpeg: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2-jack: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2-mpeg: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libakode2-pulse: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: akode-dbg: no-ctrl-scripts
N: 
N:   The package does not rely on any maintainer scripts (or other executable
N:   control files).
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: control-files
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libakode-dev: no-ctrl-scripts
N:
C: libakode2: no-ctrl-scripts
N:
C: libakode2-bin: no-ctrl-scripts
N:
C: libakode2-ffmpeg: no-ctrl-scripts
N:
C: libakode2-jack: no-ctrl-scripts
N:
C: libakode2-mpeg: no-ctrl-scripts
N:
C: libakode2-pulse: no-ctrl-scripts
N:
C: akode source: number-of-patches 0 [debian/patches/series]
N: 
N:   The number of patches according to the debian/patches/series file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches/count
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: package-is-co-maintained (with 3 uploaders)
N: 
N:   The package is co-maintained but not team-maintained according to the
N:   maintainer/uploaders fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode-dbg: package-is-maintained-by-individual
N: 
N:   The package is maintained by an individual according to the
N:   maintainer/uploaders fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libakode-dev: package-is-maintained-by-individual
N:
C: libakode2: package-is-maintained-by-individual
N:
C: libakode2-bin: package-is-maintained-by-individual
N:
C: libakode2-ffmpeg: package-is-maintained-by-individual
N:
C: libakode2-jack: package-is-maintained-by-individual
N:
C: libakode2-mpeg: package-is-maintained-by-individual
N:
C: libakode2-pulse: package-is-maintained-by-individual
N:
C: akode source: patch-system quilt
N: 
N:   This package uses the specified patch system (eg. "quilt" or "dpatch").
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: silent-on-rules-requiring-root [debian/control]
N: 
N:   The field Rules-Requires-Root is not declared in the file debian/control.
N: 
N:   Please refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules
N:   and Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and
N:   Rules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for
N:   details.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/control/field/rules-requires-root
N:   Renamed from: rules-requires-root-missing
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: source-format 3.0 (quilt)
N: 
N:   This is the source format declared in the package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/source-dir
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: standards-version 3.7.3
N: 
N:   The standards version of the package according to Standards-Version field
N:   in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/standards-version
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: trimmed-deb822-field §1 Build-Depends cdbs, tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libflac-dev (>= 1.1.1-3), libmad0-dev, libogg-dev, libvorbis-dev, libasound2-dev [!hurd-i386], libsamplerate0-dev, libspeex-dev, libpulse-dev, libjack-dev, libavformat-dev [debian/control:7]
N: 
N:   The raw but trimmed contents of the named field in the given Deb822 file.
N:   The number indicates the section from the top, starting at 1.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/deb822
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: trimmed-deb822-field §1 Maintainer TDE Debian Team <team-debian@trinitydesktop.org> [debian/control:4]
N:
C: akode source: trimmed-deb822-field §1 Priority optional [debian/control:3]
N:
C: akode source: trimmed-deb822-field §1 Section sound [debian/control:2]
N:
C: akode source: trimmed-deb822-field §1 Source akode [debian/control:1]
N:
C: akode source: trimmed-deb822-field §1 Standards-Version 3.7.3 [debian/control:8]
N:
C: akode source: trimmed-deb822-field §1 Uploaders Isaac Clerencia <isaac@debian.org>, Christopher Martin <chrsmrtn@debian.org>, Adeodato Simó <dato@net.com.org.es> [debian/control:6]
N:
C: akode source: trimmed-deb822-field §1 XSBC-Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org> [debian/control:5]
N:
C: akode source: trimmed-deb822-field §2 Architecture any [debian/control:12]
N:
C: akode source: trimmed-deb822-field §2 Conflicts akode [debian/control:15]
N:
C: akode source: trimmed-deb822-field §2 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:14]
N:
C: akode source: trimmed-deb822-field §2 Description akode plugin for aRts\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode. [debian/control:19]
N:
C: akode source: trimmed-deb822-field §2 Enhances libarts1c2, libarts1c2a-trinity, libarts1t64-trinity [debian/control:18]
N:
C: akode source: trimmed-deb822-field §2 Multi-Arch same [debian/control:13]
N:
C: akode source: trimmed-deb822-field §2 Package libakode2 [debian/control:10]
N:
C: akode source: trimmed-deb822-field §2 Recommends libakode2-bin [debian/control:17]
N:
C: akode source: trimmed-deb822-field §2 Replaces akode [debian/control:16]
N:
C: akode source: trimmed-deb822-field §2 Section libs [debian/control:11]
N:
C: akode source: trimmed-deb822-field §3 Architecture any [debian/control:27]
N:
C: akode source: trimmed-deb822-field §3 Conflicts akode, libakode2 (<< 4:14.1.6~) [debian/control:29]
N:
C: akode source: trimmed-deb822-field §3 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:28]
N:
C: akode source: trimmed-deb822-field §3 Description akode plugin for aRts\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package contains the akodeplay binary for playing via akode. [debian/control:31]
N:
C: akode source: trimmed-deb822-field §3 Package libakode2-bin [debian/control:25]
N:
C: akode source: trimmed-deb822-field §3 Replaces akode [debian/control:30]
N:
C: akode source: trimmed-deb822-field §3 Section libs [debian/control:26]
N:
C: akode source: trimmed-deb822-field §4 Architecture any [debian/control:41]
N:
C: akode source: trimmed-deb822-field §4 Conflicts akode [debian/control:44]
N:
C: akode source: trimmed-deb822-field §4 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:43]
N:
C: akode source: trimmed-deb822-field §4 Description ffmpeg plugins for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides for akode formats supported by FFMPEG. [debian/control:47]
N:
C: akode source: trimmed-deb822-field §4 Enhances libarts1c2, libarts1c2a-trinity [debian/control:46]
N:
C: akode source: trimmed-deb822-field §4 Multi-Arch same [debian/control:42]
N:
C: akode source: trimmed-deb822-field §4 Package libakode2-ffmpeg [debian/control:39]
N:
C: akode source: trimmed-deb822-field §4 Replaces akode [debian/control:45]
N:
C: akode source: trimmed-deb822-field §4 Section libs [debian/control:40]
N:
C: akode source: trimmed-deb822-field §5 Architecture any [debian/control:57]
N:
C: akode source: trimmed-deb822-field §5 Conflicts akode [debian/control:60]
N:
C: akode source: trimmed-deb822-field §5 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:59]
N:
C: akode source: trimmed-deb822-field §5 Description mpeg plugins for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides MP3 and other MPEG formats for akode. [debian/control:63]
N:
C: akode source: trimmed-deb822-field §5 Enhances libarts1c2, libarts1c2a-trinity [debian/control:62]
N:
C: akode source: trimmed-deb822-field §5 Multi-Arch same [debian/control:58]
N:
C: akode source: trimmed-deb822-field §5 Package libakode2-mpeg [debian/control:55]
N:
C: akode source: trimmed-deb822-field §5 Replaces akode [debian/control:61]
N:
C: akode source: trimmed-deb822-field §5 Section libs [debian/control:56]
N:
C: akode source: trimmed-deb822-field §6 Architecture any [debian/control:73]
N:
C: akode source: trimmed-deb822-field §6 Conflicts akode [debian/control:76]
N:
C: akode source: trimmed-deb822-field §6 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:75]
N:
C: akode source: trimmed-deb822-field §6 Description pulseaudio sink for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides PulseAudio sink for akode. [debian/control:79]
N:
C: akode source: trimmed-deb822-field §6 Enhances libarts1c2, libarts1c2a-trinity [debian/control:78]
N:
C: akode source: trimmed-deb822-field §6 Multi-Arch same [debian/control:74]
N:
C: akode source: trimmed-deb822-field §6 Package libakode2-pulse [debian/control:71]
N:
C: akode source: trimmed-deb822-field §6 Replaces akode [debian/control:77]
N:
C: akode source: trimmed-deb822-field §6 Section libs [debian/control:72]
N:
C: akode source: trimmed-deb822-field §7 Architecture any [debian/control:89]
N:
C: akode source: trimmed-deb822-field §7 Conflicts akode [debian/control:92]
N:
C: akode source: trimmed-deb822-field §7 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:91]
N:
C: akode source: trimmed-deb822-field §7 Description jack sink for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides JACK sink for akode. [debian/control:95]
N:
C: akode source: trimmed-deb822-field §7 Enhances libarts1c2, libarts1c2a-trinity [debian/control:94]
N:
C: akode source: trimmed-deb822-field §7 Multi-Arch same [debian/control:90]
N:
C: akode source: trimmed-deb822-field §7 Package libakode2-jack [debian/control:87]
N:
C: akode source: trimmed-deb822-field §7 Replaces akode [debian/control:93]
N:
C: akode source: trimmed-deb822-field §7 Section libs [debian/control:88]
N:
C: akode source: trimmed-deb822-field §8 Architecture any [debian/control:105]
N:
C: akode source: trimmed-deb822-field §8 Depends ${shlibs:Depends}, ${misc:Depends}, libakode2 (= ${binary:Version}), pkgconf, libflac-dev (>= 1.1.1-3), libflac-dev, libmad0-dev, libogg-dev, libvorbis-dev, ${alsa-dev}, libsamplerate0-dev, libspeex-dev [debian/control:106]
N:
C: akode source: trimmed-deb822-field §8 Description development files for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package contains the development files for libakode. [debian/control:108]
N:
C: akode source: trimmed-deb822-field §8 Package libakode-dev [debian/control:103]
N:
C: akode source: trimmed-deb822-field §8 Replaces kdemultimedia-dev (<< 4:3.5-rc1), libakode2 (<< 2.0-4) [debian/control:107]
N:
C: akode source: trimmed-deb822-field §8 Section libdevel [debian/control:104]
N:
C: akode source: trimmed-deb822-field §9 Architecture any [debian/control:118]
N:
C: akode source: trimmed-deb822-field §9 Depends ${shlibs:Depends}, ${misc:Depends}, libakode2 (= ${binary:Version}) [debian/control:120]
N:
C: akode source: trimmed-deb822-field §9 Description debugging symbols for akode\n This package contains the debugging symbols associated with akode.\n They will automatically be used by gdb for debugging akode-related\n issues. [debian/control:121]
N:
C: akode source: trimmed-deb822-field §9 Package akode-dbg [debian/control:116]
N:
C: akode source: trimmed-deb822-field §9 Priority optional [debian/control:119]
N:
C: akode source: trimmed-deb822-field §9 Section libdevel [debian/control:117]
N:
C: akode source: trimmed-field Architecture any
N: 
N:   These are the raw but trimmed contents of the named field in the package's
N:   primary control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/trimmed
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: akode source: trimmed-field Binary libakode2, libakode2-bin, libakode2-ffmpeg, libakode2-mpeg, libakode2-pulse, libakode2-jack, libakode-dev, akode-dbg
N:
C: akode source: trimmed-field Build-Depends cdbs, tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libflac-dev (>= 1.1.1-3), libmad0-dev, libogg-dev, libvorbis-dev, libasound2-dev [!hurd-i386], libsamplerate0-dev, libspeex-dev, libpulse-dev, libjack-dev, libavformat-dev
N:
C: akode source: trimmed-field Checksums-Sha1 92c62b54f1eef198a2658465bc50ac10f4ae6670 74940 akode_14.2.0~pre14.orig.tar.xz\n cb403991aa8e43e2019653f9956010c791777a7d 5508 akode_14.2.0~pre14-0ubuntu25.10.0+9.debian.tar.xz
N:
C: akode source: trimmed-field Checksums-Sha256 f56e4e8737061a08694c14df30cea3e64c534c0b77317b2fbea8155d52624f27 74940 akode_14.2.0~pre14.orig.tar.xz\n cf890611a91f384275c2cb73bf51550699e3005fbeaba50c3c395fba5aeaaa05 5508 akode_14.2.0~pre14-0ubuntu25.10.0+9.debian.tar.xz
N:
C: akode source: trimmed-field Files da5542f378d843df9648860f72da6b43 74940 akode_14.2.0~pre14.orig.tar.xz\n 37977a8041585277063579b4175d67de 5508 akode_14.2.0~pre14-0ubuntu25.10.0+9.debian.tar.xz
N:
C: akode source: trimmed-field Format 3.0 (quilt)
N:
C: akode source: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: akode source: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: akode source: trimmed-field Package-List akode-dbg deb libdevel optional arch=any\n libakode-dev deb libdevel optional arch=any\n libakode2 deb libs optional arch=any\n libakode2-bin deb libs optional arch=any\n libakode2-ffmpeg deb libs optional arch=any\n libakode2-jack deb libs optional arch=any\n libakode2-mpeg deb libs optional arch=any\n libakode2-pulse deb libs optional arch=any
N:
C: akode source: trimmed-field Source akode
N:
C: akode source: trimmed-field Standards-Version 3.7.3
N:
C: akode source: trimmed-field Uploaders Isaac Clerencia <isaac@debian.org>, Christopher Martin <chrsmrtn@debian.org>, Adeodato Simó <dato@net.com.org.es>
N:
C: akode source: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: akode-dbg: trimmed-field Architecture amd64
N:
C: akode-dbg: trimmed-field Build-Ids 35fbab6702dcdcb84a2999611fa7f00eb7e14741 5611c009a76c0a236bdf8967e33e793ff2a7e483 5b0a57257887f5e3c87dabe5871cd918a28d175e 5b847dcc3e9fafc5a94c23c93ee57afe96071191 86b15eb913140627c85db18cc544907fb07154a8 8a0a491130fbbea0a747eb72aa9d36c390f462b7 279b241771290e13e0c326e929e840a8f383b338 82968fe4d8a2fc5b07d6171fe3507ea1812ddf51 e6528b8f6d245e92790430cac8fa11b71c77eb53 0afa431a1d5d9ff8fc9e90d2b49d2f680c833958 ea2e10925e66d2b28c6f9ba7bbf88e96e43eb871
N:
C: akode-dbg: trimmed-field Depends libakode2 (= 4:14.2.0~pre14-0ubuntu25.10.0+9)
N:
C: akode-dbg: trimmed-field Description debugging symbols for akode\n This package contains the debugging symbols associated with akode.\n They will automatically be used by gdb for debugging akode-related\n issues.
N:
C: akode-dbg: trimmed-field Installed-Size 930
N:
C: akode-dbg: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: akode-dbg: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: akode-dbg: trimmed-field Package akode-dbg
N:
C: akode-dbg: trimmed-field Priority optional
N:
C: akode-dbg: trimmed-field Section libdevel
N:
C: akode-dbg: trimmed-field Source akode
N:
C: akode-dbg: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode-dev: trimmed-field Architecture amd64
N:
C: libakode-dev: trimmed-field Depends libakode2 (= 4:14.2.0~pre14-0ubuntu25.10.0+9), pkgconf, libflac-dev (>= 1.1.1-3), libmad0-dev, libogg-dev, libvorbis-dev, libasound2-dev, libsamplerate0-dev, libspeex-dev
N:
C: libakode-dev: trimmed-field Description development files for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package contains the development files for libakode.
N:
C: libakode-dev: trimmed-field Installed-Size 100
N:
C: libakode-dev: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode-dev: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode-dev: trimmed-field Package libakode-dev
N:
C: libakode-dev: trimmed-field Priority optional
N:
C: libakode-dev: trimmed-field Replaces kdemultimedia-dev (<< 4:3.5-rc1), libakode2 (<< 2.0-4)
N:
C: libakode-dev: trimmed-field Section libdevel
N:
C: libakode-dev: trimmed-field Source akode
N:
C: libakode-dev: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2: trimmed-field Architecture amd64
N:
C: libakode2: trimmed-field Conflicts akode
N:
C: libakode2: trimmed-field Depends libasound2t64 (>= 1.0.16), libc6 (>= 2.34), libflac14 (>= 1.5.0), libgcc-s1 (>= 3.3.1), libogg0 (>= 1.0rc3), libsamplerate0 (>= 0.1.7), libspeex1 (>= 1.2~), libstdc++6 (>= 13.1), libvorbisfile3 (>= 1.1.2)
N:
C: libakode2: trimmed-field Description akode plugin for aRts\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.
N:
C: libakode2: trimmed-field Enhances libarts1c2, libarts1c2a-trinity, libarts1t64-trinity
N:
C: libakode2: trimmed-field Installed-Size 260
N:
C: libakode2: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2: trimmed-field Multi-Arch same
N:
C: libakode2: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2: trimmed-field Package libakode2
N:
C: libakode2: trimmed-field Priority optional
N:
C: libakode2: trimmed-field Recommends libakode2-bin
N:
C: libakode2: trimmed-field Replaces akode
N:
C: libakode2: trimmed-field Section libs
N:
C: libakode2: trimmed-field Source akode
N:
C: libakode2: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2-bin: trimmed-field Architecture amd64
N:
C: libakode2-bin: trimmed-field Conflicts akode, libakode2 (<< 4:14.1.6~)
N:
C: libakode2-bin: trimmed-field Depends libakode2 (>= 2-rc1-1), libc6 (>= 2.34), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
N:
C: libakode2-bin: trimmed-field Description akode plugin for aRts\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package contains the akodeplay binary for playing via akode.
N:
C: libakode2-bin: trimmed-field Installed-Size 27
N:
C: libakode2-bin: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2-bin: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2-bin: trimmed-field Package libakode2-bin
N:
C: libakode2-bin: trimmed-field Priority optional
N:
C: libakode2-bin: trimmed-field Replaces akode
N:
C: libakode2-bin: trimmed-field Section libs
N:
C: libakode2-bin: trimmed-field Source akode
N:
C: libakode2-bin: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2-ffmpeg: trimmed-field Architecture amd64
N:
C: libakode2-ffmpeg: trimmed-field Conflicts akode
N:
C: libakode2-ffmpeg: trimmed-field Depends libavcodec61 (>= 7:7.0), libavformat61 (>= 7:7.0), libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1)
N:
C: libakode2-ffmpeg: trimmed-field Description ffmpeg plugins for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides for akode formats supported by FFMPEG.
N:
C: libakode2-ffmpeg: trimmed-field Enhances libarts1c2, libarts1c2a-trinity
N:
C: libakode2-ffmpeg: trimmed-field Installed-Size 36
N:
C: libakode2-ffmpeg: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2-ffmpeg: trimmed-field Multi-Arch same
N:
C: libakode2-ffmpeg: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2-ffmpeg: trimmed-field Package libakode2-ffmpeg
N:
C: libakode2-ffmpeg: trimmed-field Priority optional
N:
C: libakode2-ffmpeg: trimmed-field Replaces akode
N:
C: libakode2-ffmpeg: trimmed-field Section libs
N:
C: libakode2-ffmpeg: trimmed-field Source akode
N:
C: libakode2-ffmpeg: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2-jack: trimmed-field Architecture amd64
N:
C: libakode2-jack: trimmed-field Conflicts akode
N:
C: libakode2-jack: trimmed-field Depends libakode2 (>= 2-rc1-1), libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libjack-jackd2-0 (>= 1.9.10+20150825) | libjack-0.125, libstdc++6 (>= 13.1)
N:
C: libakode2-jack: trimmed-field Description jack sink for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides JACK sink for akode.
N:
C: libakode2-jack: trimmed-field Enhances libarts1c2, libarts1c2a-trinity
N:
C: libakode2-jack: trimmed-field Installed-Size 36
N:
C: libakode2-jack: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2-jack: trimmed-field Multi-Arch same
N:
C: libakode2-jack: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2-jack: trimmed-field Package libakode2-jack
N:
C: libakode2-jack: trimmed-field Priority optional
N:
C: libakode2-jack: trimmed-field Replaces akode
N:
C: libakode2-jack: trimmed-field Section libs
N:
C: libakode2-jack: trimmed-field Source akode
N:
C: libakode2-jack: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2-mpeg: trimmed-field Architecture amd64
N:
C: libakode2-mpeg: trimmed-field Conflicts akode
N:
C: libakode2-mpeg: trimmed-field Depends libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libmad0 (>= 0.15.1b-3), libstdc++6 (>= 5)
N:
C: libakode2-mpeg: trimmed-field Description mpeg plugins for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides MP3 and other MPEG formats for akode.
N:
C: libakode2-mpeg: trimmed-field Enhances libarts1c2, libarts1c2a-trinity
N:
C: libakode2-mpeg: trimmed-field Installed-Size 32
N:
C: libakode2-mpeg: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2-mpeg: trimmed-field Multi-Arch same
N:
C: libakode2-mpeg: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2-mpeg: trimmed-field Package libakode2-mpeg
N:
C: libakode2-mpeg: trimmed-field Priority optional
N:
C: libakode2-mpeg: trimmed-field Replaces akode
N:
C: libakode2-mpeg: trimmed-field Section libs
N:
C: libakode2-mpeg: trimmed-field Source akode
N:
C: libakode2-mpeg: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
C: libakode2-pulse: trimmed-field Architecture amd64
N:
C: libakode2-pulse: trimmed-field Conflicts akode
N:
C: libakode2-pulse: trimmed-field Depends libc6 (>= 2.4), libgcc-s1 (>= 3.3.1), libpulse0 (>= 0.99.1), libstdc++6 (>= 13.1)
N:
C: libakode2-pulse: trimmed-field Description pulseaudio sink for akode\n aKode is a new multithreaded audio library that provides aRts with\n plugins to play a variety of formats: Ogg Vorbis, Musepack (MPC),\n FLAC and Speex. aKode also focuses on performance, and so it means a\n big enhancement for users runing aRts in non-realtime mode.\n .\n This package provides PulseAudio sink for akode.
N:
C: libakode2-pulse: trimmed-field Enhances libarts1c2, libarts1c2a-trinity
N:
C: libakode2-pulse: trimmed-field Installed-Size 28
N:
C: libakode2-pulse: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libakode2-pulse: trimmed-field Multi-Arch same
N:
C: libakode2-pulse: trimmed-field Original-Maintainer Debian Qt/KDE Maintainers <debian-qt-kde@lists.debian.org>
N:
C: libakode2-pulse: trimmed-field Package libakode2-pulse
N:
C: libakode2-pulse: trimmed-field Priority optional
N:
C: libakode2-pulse: trimmed-field Replaces akode
N:
C: libakode2-pulse: trimmed-field Section libs
N:
C: libakode2-pulse: trimmed-field Source akode
N:
C: libakode2-pulse: trimmed-field Version 4:14.2.0~pre14-0ubuntu25.10.0+9
N:
O: akode source: binary-nmu-debian-revision-in-source 4:14.2.0~pre14-0ubuntu25.10.0+9
N: 
N:   The version number of your source package ends in +b and a number or has a
N:   Debian revision containing three parts. These version numbers are used by
N:   binary NMUs and should not be used as the source version. (The +b form is
N:   the current standard; the three-part version number now obsolete.)
N: 
N:   Please refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the
N:   Debian Developer's Reference for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: fields/version
N: 
N:
N: We want XZ regardless of the default compression.
O: akode source: custom-compression-in-debian-source-options compression = "xz" [debian/source/options:2]
N: 
N:   This package selects a custom compression level or algorithm in
N:   debian/source/options. Please remove the call and let dpkg-deb(1) select
N:   suitable defaults.
N:   
N:   Custom compression settings are usually chosen for one of two reasons:
N:   
N:   Higher compression levels or more advanced algorithms shrink the sizes of
N:   large files, but they can cause problems in the resource constrained
N:   environments used in Debian's buildd infrastructure. For example, higher
N:   than expected memory consumption may trigger an FTBFS or a failure to
N:   install.
N:   
N:   Lower compression levels or less advanced algorithms are sometimes needed
N:   to support older Debian version. Unfortunately, they also make it harder
N:   to change the defaults on an archive-wide basis.
N:   
N:   Some legitimate use cases trigger this tag. Please override it.
N: 
N:   Please refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)
N:   manual page for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: debian/source-dir
N:   Renamed from: debian-source-options-has-custom-compression-settings
N: 
N:
N: We want XZ regardless of the default compression.
O: akode source: custom-compression-in-debian-source-options compression-level = 9 [debian/source/options:3]
N:
N: The manual page is not available, this may be addressed sometime in the
N: future.
O: libakode-dev: no-manual-page [usr/bin/akode-config]
N: 
N:   Each binary in /usr/bin, /usr/sbin, /bin, /sbin or /usr/games should have
N:   a manual page
N:   
N:   Note that though the man program has the capability to check for several
N:   program names in the NAMES section, each of these programs should have its
N:   own manual page (a symbolic link to the appropriate manual page is
N:   sufficient) because other manual page viewers such as xman or tkman don't
N:   support this.
N:   
N:   If the name of the manual page differs from the binary by case, man may be
N:   able to find it anyway; however, it is still best practice to match the
N:   exact capitalization of the executable in the manual page.
N:   
N:   If the manual pages are provided by another package on which this package
N:   depends, Lintian may not be able to determine that manual pages are
N:   available. In this case, after confirming that all binaries do have manual
N:   pages after this package and its dependencies are installed, please add a
N:   Lintian override.
N: 
N:   Please refer to Manual pages (Section 12.1) in the Debian Policy Manual
N:   for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: documentation/manual
N:   Renamed from: binary-without-manpage
N: 
N:
N: The manual page is not available, this may be addressed sometime in the
N: future.
O: libakode2-bin: no-manual-page [usr/bin/akodeplay]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_alsa_sink.so]
N: 
N:   A shared object was identified in a library directory (a directory in the
N:   standard linker path) which doesn't have a SONAME. This is usually an
N:   error.
N:   
N:   SONAMEs are set with something like gcc -Wl,-soname,libfoo.so.0, where 0
N:   is the major version of the library. If your package uses libtool, then
N:   libtool invoked with the right options should be doing this.
N:   
N:   To view the SONAME of a shared library, run readelf -d on the shared
N:   library and look for the tag of type SONAME.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: libraries/shared/soname/missing
N: 
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_mpc_decoder.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_oss_sink.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_src_resampler.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_xiph_decoder.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2-ffmpeg: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_ffmpeg_decoder.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2-jack: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_jack_sink.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2-mpeg: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_mpeg_decoder.so]
N:
N: These are akode plugins, not regular shared libraries.
O: libakode2-pulse: sharedobject-in-library-directory-missing-soname [usr/lib/x86_64-linux-gnu/libakode_pulse_sink.so]

--------------------