1{"tags": [{"severity": "error", "package": "ksensors-trinity", "tag": "epoch-changed-but-upstream-version-did-not-go-backwards", "explanation": "The previous version of this package had a different version epoch to the\ncurrent version but the upstream version did not go \"backwards\". For\nexample, the previous package version was \"1:1.0-1\" and the current\nversion is \"2:2.0-1\".\n\nThis was likely an accidental bump or addition of an epoch.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nVisibility: error\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "0.7.3-18 -> 4:14.2.0~pre33-0debian14.0.0+7~a", "pointer": "debian/changelog:1"}, {"severity": "error", "package": "ksensors-trinity", "tag": "rules-require-build-prerequisite", "explanation": "", "comment": "", "note": "(does not satisfy cdbs:any)", "pointer": "debian/rules"}, {"severity": "warning", "package": "ksensors-trinity", "tag": "binary-nmu-debian-revision-in-source", "explanation": "The version number of your source package ends in +b and a number or has a\nDebian revision containing three parts. These version numbers are used by\nbinary NMUs and should not be used as the source version. (The +b form is\nthe current standard; the three-part version number now obsolete.)\n\nPlease refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the\nDebian Developer's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/version", "comment": "The code in debian/rules requires a prerequisite\nthat is not presently listed in the package's Build-Depends.\n\nIn the special case of Python, affected packages should Build-Depend on\none of python3, python3-all, python3-dev, or python3-all-dev. Which one\ndepends on whether a package supports multiple Python versions, and also\nwhether the package builds Python modules or uses Python only as part of\nthe build process.\n\nPackages that depend on a specific Python version may build-depend on any\nappropriate pythonX.Y or pythonX.Y-dev package instead.\n\nThe condition you see in the context is not a recommendation on what to\nadd. If you see a list, more than likely only one member is needed to make\nthis tag go away. You probably also do not need the :any multiarch\nqualifier, if you see one.\n\nPlease refer to Package relationships (Section 4.2) in the Debian Policy\nManual for details.\n\nVisibility: error\nShow-Always: no\nCheck: debian/rules\nRenamed from: missing-build-dependency missing-python-build-dependency", "note": "4:14.2.0~pre33-0debian14.0.0+7~a", "pointer": ""}, {"severity": "warning", "package": "ksensors-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "This package selects a custom compression level or algorithm in\ndebian/source/options. Please remove the call and let dpkg-deb(1) select\nsuitable defaults.\n\nCustom compression settings are usually chosen for one of two reasons:\n\nHigher compression levels or more advanced algorithms shrink the sizes of\nlarge files, but they can cause problems in the resource constrained\nenvironments used in Debian's buildd infrastructure. For example, higher\nthan expected memory consumption may trigger an FTBFS or a failure to\ninstall.\n\nLower compression levels or less advanced algorithms are sometimes needed\nto support older Debian version. Unfortunately, they also make it harder\nto change the defaults on an archive-wide basis.\n\nSome legitimate use cases trigger this tag. Please override it.\n\nPlease refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)\nmanual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/source-dir\nRenamed from: debian-source-options-has-custom-compression-settings", "comment": "", "note": "compression = \"xz\"", "pointer": "debian/source/options:2"}, {"severity": "warning", "package": "ksensors-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "", "comment": "", "note": "compression-level = 9", "pointer": "debian/source/options:3"}, {"severity": "warning", "package": "ksensors-trinity", "tag": "epoch-change-without-comment", "explanation": "The previous version of this package had a different version epoch (eg.\n2:1.0-1) to the current version but there's no reference to this in the\nchangelog entry.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nLintian looks in this version's changelog entry for the phrase \"epoch\".\n\nVisibility: warning\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "0.7.3-18 -> 4:14.2.0~pre33-0debian14.0.0+7~a", "pointer": "debian/changelog:1"}, {"severity": "warning", "package": "ksensors-trinity", "tag": "no-nmu-in-changelog", "explanation": "When you NMU a package, that fact should be mentioned on the first line in\nthe changelog entry. Use the words \"NMU\" or \"Non-maintainer upload\" (case\ninsensitive).\n\nMaybe you didn't intend this upload to be a NMU, in that case, please\ndouble-check that the most recent entry in the changelog is byte-for-byte\nidentical to the maintainer or one of the uploaders. If this is a local\npackage (not intended for Debian), you can suppress this warning by\nputting \"local\" in the version number or \"local package\" on the first line\nof the changelog entry.\n\nPlease refer to Using the DELAYED/ queue (Section 5.11.3) in the Debian\nDeveloper's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: nmu\nRenamed from: changelog-should-mention-nmu", "comment": "", "note": "", "pointer": "debian/changelog:1"}, {"severity": "warning", "package": "ksensors-trinity", "tag": "source-nmu-has-incorrect-version-number", "explanation": "A source NMU should have a Debian revision of \"-x.x\" (or \"+nmuX\" for a\nnative package). This is to prevent stealing version numbers from the\nmaintainer.\n\nMaybe you didn't intend this upload to be a NMU, in that case, please\ndouble-check that the most recent entry in the changelog is byte-for-byte\nidentical to the maintainer or one of the uploaders. If this is a local\npackage (not intended for Debian), you can suppress this warning by\nputting \"local\" in the version number or \"local package\" on the first line\nof the changelog entry.\n\nPlease refer to NMUs and debian/changelog (Section 5.11.2) in the Debian\nDeveloper's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: nmu", "comment": "", "note": "4:14.2.0~pre33-0debian14.0.0+7~a", "pointer": "debian/changelog:1"}, {"severity": "info", "package": "ksensors-trinity", "tag": "debian-watch-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/watch file. This file is used for automatic detection of new\nupstream versions by the Debian External Health Status project and other\nproject infrastructure. If this package is maintained upstream, please\nconsider adding a debian/watch file to detect new releases.\n\nIf the package is not maintained upstream or if upstream uses a\ndistribution mechanism that cannot be meaningfully monitored by uscan and\nthe Debian External Health Status project, please consider adding a format\n5 debian/watch file containing an Untrackable field documenting the\nsituation.\n\nPlease refer to Upstream source location: debian/watch (Section 4.11) in\nthe Debian Policy Manual and the uscan(1) manual page for details.\n\nVisibility: info\nShow-Always: no\nCheck: debian/watch", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "ksensors-trinity", "tag": "no-dh-sequencer", "explanation": "This package does not use the dh sequencer in debian/rules.\n\nWhile maintainers may use a variety of build systems, this one is by far\nthe most popular.\n\nMaintainers are strongly encouraged to use the dh sequencer in new\npackages and convert existing ones when appropriate.\n\nVisibility: info\nShow-Always: no\nCheck: debian/rules/dh-sequencer", "comment": "", "note": "", "pointer": "debian/rules"}, {"severity": "info", "package": "ksensors-trinity", "tag": "ored-build-depends-on-obsolete-package", "explanation": "The package build-depends on an ORed group of packages which includes a\npackage that has been superseded.\n\nVisibility: info\nShow-Always: no\nCheck: fields/package-relations", "comment": "", "note": "Build-Depends: libsensors4-dev => libsensors-dev", "pointer": ""}, {"severity": "info", "package": "ksensors-trinity", "tag": "out-of-date-standards-version", "explanation": "The source package refers to a Standards-Version older than the one that\nwas current at the time the package was created (according to the\ntimestamp of the latest debian/changelog entry). Please consider updating\nthe package to current Policy and setting this control field\nappropriately.\n\nIf the package is already compliant with the current standards, you don't\nhave to re-upload the package just to adjust the Standards-Version control\nfield. However, please remember to update this field next time you upload\nthe package.\n\nSee /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the\ndebian-policy package for a summary of changes in newer versions of\nPolicy.\n\nPlease refer to\nhttps://www.debian.org/doc/debian-policy/upgrading-checklist.html for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: fields/standards-version", "comment": "", "note": "3.8.3 (released 2009-08-16) (current is 4.7.3)", "pointer": ""}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "no-dep5-copyright", "explanation": "This package does not use a machine-readable debian/copyright file.\n\nThis format makes it easier to review licenses and can be easily parsed by\nLintian.\n\nPlease refer to\nhttps://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/copyright/dep5", "comment": "", "note": "", "pointer": "debian/copyright"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "no-homepage-field", "explanation": "This non-native package lacks a Homepage field. If the package has an\nupstream home page that contains useful information or resources for the\nend user, consider adding a Homepage control field to debian/control.\n\nPlease refer to Homepage (Section 5.6.23) in the Debian Policy Manual for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: fields/homepage", "comment": "", "note": "", "pointer": ""}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "package-uses-old-debhelper-compat-version", "explanation": "This package uses a debhelper compatibility level that is no longer\nrecommended. Please consider using the recommended level.\n\nFor most packages, the best way to set the compatibility level is to\nspecify debhelper-compat (= X) as a Build-Depends in debian/control. You\ncan also use the debian/compat file or export DH_COMPAT in debian/rules.\n\nIf no level is selected debhelper defaults to level 1, which is\ndeprecated.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "10", "pointer": ""}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "redundant-priority-optional-field", "explanation": "This package currently sets the Priority field in the debian/control file\nto \"optional\".\n\nAs of dpkg version 1.22.13, this field is set to \"optional\" by default. As\nsuch, in this case the Priority field is redundant and should be removed.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/control/field/priority", "comment": "", "note": "", "pointer": "debian/control:3"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "This file contains lines with trailing whitespace characters.\n\nWhilst often harmless and unsightly, such extra whitespaces can also cause\ntools to interpret the whitespace characters literally. The tool diff(1)\ndoes not like them, either. They are best avoided.\n\nSome of these problems can be hard to track down.\n\nWhitespace at the end of lines may be removed with the following:\n\n$ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog\n\nIf you use Emacs, you can also use \"M-x wh-cl\" (whitespace-cleanup).\n\nHowever, if you wish to only remove trailing spaces and leave trailing\ntabs (eg. for Makefiles), you can use the following code snippet:\n\n$ sed -i -e 's@[ ]*$@@g' debian/rules\n\nTo remove empty lines from the end of a file, you can use:\n\n$ sed -i -e :a -e '/^\\n*$/{$d;N;};/\\n$/ba' debian/rules\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/trailing-whitespace\nRenamed from: file-contains-trailing-whitespace", "comment": "", "note": "", "pointer": "debian/changelog:108"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:131"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:132"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:153"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:161"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:17"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:189"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:211"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:280"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:293"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:315"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:320"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:388"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:400"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:406"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:418"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:43"}, {"severity": "pedantic", "package": "ksensors-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:77"}, {"severity": "experimental", "package": "ksensors-trinity", "tag": "upstream-metadata-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/upstream/metadata file.\n\nThe Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to\ncollect meta-information about upstream projects from any source package.\nThis file is in YAML format and it is used in to feed the data in the\nUltimateDebianDatabase. For example, it can contains the way the authors\nwant their software be cited in publications and some bibliographic\nreferences about the software.\n\nPlease add a debian/upstream/metadata file.\n\nPlease refer to https://dep-team.pages.debian.net/deps/dep12/ and\nhttps://wiki.debian.org/UpstreamMetadata for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/upstream/metadata\nThis tag is experimental.", "comment": "", "note": "", "pointer": ""}, {"severity": "experimental", "package": "ksensors-trinity", "tag": "very-long-line-length-in-source-file", "explanation": "The source file includes a line length that is well beyond the normally\nhuman made code line length.\n\nThis very long line length does not allow Lintian to do correctly some\nsource file checks.\n\nThis line could also be the result of some text injected by a computer\nprogram, and thus could lead to FTBFS bugs.\n\nLast but not least, long line in source code could be used to obfuscate\nthe source code and to hide stuff like backdoors or security problems.\n\nIt could be due to jslint source comments or other build tool comments.\n\nYou may report this issue upstream.\n\nVisibility: pedantic\nShow-Always: no\nCheck: files/contents/line-length\nRenamed from: insane-line-length-in-source-file\nThis tag is experimental.\n\nScreen: autotools/long-lines\nAdvocates: \"Russ Allbery\" <rra@debian.org>\nReason:\nUpstream sources using autoconf have traditionally been\ndistributed with generated ./configure scripts as well as\nother third-party m4 macro files such as libtool.\n\nWhen paired with automake, there may also be some intermediate\nMakefile.in files.\n\nA lot of sources potentially contain such files, but they are\nnot actionable by either the Debian distributor or by the\nupstream maintainer.\n\nAs a side note, modern Debian build protocols will re-create\nmany of those files via dh_autoreconf. They are present merely\nto aid in bootstrapping systems where the GNU suite may not yet\nbe available.\n\nRead more in Bug#996740.", "comment": "", "note": "1830 > 512", "pointer": "src/aboutcfgdesign.ui:1405"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "debhelper-compat-level", "explanation": "This is the debhelper compat level used specified by this package.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "10", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "debian-build-system", "explanation": "This is the build system that Lintian believes the package is using.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "cdbs-with-debhelper.mk", "pointer": "debian/rules"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "mail-contact", "explanation": "This person is a contact in the named group for this package.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nRenamed from: maintainer uploader\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Maintainer \"TDE Debian Team\" <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "number-of-patches", "explanation": "The number of patches according to the debian/patches/series file.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches/count\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "0", "pointer": "debian/patches/series"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "package-is-maintained-by-individual", "explanation": "The package is maintained by an individual according to the\nmaintainer/uploaders fields in the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/vcs\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "patch-system", "explanation": "This package uses the specified patch system (eg. \"quilt\").\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "quilt", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "rules-do-not-require-root", "explanation": "The sources can build the installation packages without using fakeroot(1)\nor similar.\n\nPlease refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules\nand Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and\nRules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for\ndetails.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/control/field/rules-requires-root\nRenamed from: rules-does-not-require-root\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": "debian/control"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "source-format", "explanation": "This is the source format declared in the package.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/source-dir\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "standards-version", "explanation": "The standards version of the package according to Standards-Version field\nin the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/standards-version\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.8.3", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "The raw but trimmed contents of the named field in the given Deb822 file.\nThe number indicates the section from the top, starting at 1.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/deb822\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "\u00a71 Build-Conflicts autoconf2.13", "pointer": "debian/control:6"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libsensors-dev | libsensors4-dev, tdelibs14-trinity-dev, imagemagick", "pointer": "debian/control:5"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": "debian/control:4"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Priority optional", "pointer": "debian/control:3"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Section tde", "pointer": "debian/control:2"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Source ksensors-trinity", "pointer": "debian/control:1"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Standards-Version 3.8.3", "pointer": "debian/control:7"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Architecture any", "pointer": "debian/control:10"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Depends ${shlibs:Depends}, ${misc:Depends}, lm-sensors", "pointer": "debian/control:11"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Description lm-sensors frontend for TDE\\n This is a lm-sensors frontend for TDE for monitoring a motherboard.\\n It allows you to access information from temperature and fan speed\\n sensors.\\n .\\n You will need lm-sensors kernel modules to use this package.", "pointer": "debian/control:13"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Package ksensors-trinity", "pointer": "debian/control:9"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Recommends hddtemp (>= 0.3beta2-1)", "pointer": "debian/control:12"}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "These are the raw but trimmed contents of the named field in the package's\nprimary control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/trimmed\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Architecture any", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Binary ksensors-trinity", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Conflicts autoconf2.13", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libsensors-dev | libsensors4-dev, tdelibs14-trinity-dev, imagemagick", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha1 70871e1a157af198f64e0e657a3f76687050977f 231836 ksensors-trinity_14.2.0~pre33.orig.tar.xz\\n 7a1f5eee08ac4f2ffa6e2bb695e40b73273db0fc 4884 ksensors-trinity_14.2.0~pre33-0debian14.0.0+7~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha256 e1bfc84f6fca83c13547511e9e50f713f4885fe1915c1de366c636eb3f990160 231836 ksensors-trinity_14.2.0~pre33.orig.tar.xz\\n 339f7a93234d37b10aa4d39ab1a9ae9239c6e1771676d1e81b029225f7b8a227 4884 ksensors-trinity_14.2.0~pre33-0debian14.0.0+7~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Files 0fddf341cc1ee455f60926144b4ed912 231836 ksensors-trinity_14.2.0~pre33.orig.tar.xz\\n 99de358f4af8dedabe102d9c1afae948 4884 ksensors-trinity_14.2.0~pre33-0debian14.0.0+7~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Format 3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Package-List ksensors-trinity deb tde optional arch=any", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Source ksensors-trinity", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Standards-Version 3.8.3", "pointer": ""}, {"severity": "classification", "package": "ksensors-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Version 4:14.2.0~pre33-0debian14.0.0+7~a", "pointer": ""}], "summary": {"tags_count_by_severity": {"error": 2, "warning": 6, "info": 4, "pedantic": 22, "experimental": 2, "overridden": 0, "classification": 34}, "package_filename": {"ksensors-trinity": "ksensors-trinity_14.2.0~pre33-0debian14.0.0+7~a.dsc"}, "tags_found": ["binary-nmu-debian-revision-in-source", "custom-compression-in-debian-source-options", "debhelper-compat-level", "debian-build-system", "debian-watch-file-is-missing", "epoch-change-without-comment", "epoch-changed-but-upstream-version-did-not-go-backwards", "mail-contact", "no-dep5-copyright", "no-dh-sequencer", "no-homepage-field", "no-nmu-in-changelog", "number-of-patches", "ored-build-depends-on-obsolete-package", "out-of-date-standards-version", "package-is-maintained-by-individual", "package-uses-old-debhelper-compat-version", "patch-system", "redundant-priority-optional-field", "rules-do-not-require-root", "rules-require-build-prerequisite", "source-format", "source-nmu-has-incorrect-version-number", "standards-version", "trailing-whitespace", "trimmed-deb822-field", "trimmed-field", "upstream-metadata-file-is-missing", "very-long-line-length-in-source-file"], "overridden_tags_found": [], "lintian_version": "2.132.1", "distribution": "debian:forky"}, "version": 1}