analysis.json

{"tags": [{"severity": "error", "package": "gtk-qt-engine-trinity", "tag": "epoch-changed-but-upstream-version-did-not-go-backwards", "explanation": "The previous version of this package had a different version epoch to the\ncurrent version but the upstream version did not go \"backwards\". For\nexample, the previous package version was \"1:1.0-1\" and the current\nversion is \"2:2.0-1\".\n\nThis was likely an accidental bump or addition of an epoch.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nVisibility: error\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "1:0.8-1ubuntu3 -> 4:14.2.0~pre43-0debian12.0.0+7", "pointer": "debian/changelog:1"}, {"severity": "error", "package": "gtk-qt-engine-trinity", "tag": "rules-require-build-prerequisite", "explanation": "", "comment": "", "note": "(does not satisfy cdbs:any)", "pointer": "debian/rules"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "binary-nmu-debian-revision-in-source", "explanation": "The version number of your source package ends in +b and a number or has a\nDebian revision containing three parts. These version numbers are used by\nbinary NMUs and should not be used as the source version. (The +b form is\nthe current standard; the three-part version number now obsolete.)\n\nPlease refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the\nDebian Developer's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/version", "comment": "The code in debian/rules requires a prerequisite\nthat is not presently listed in the package's Build-Depends.\n\nIn the special case of Python, affected packages should Build-Depend on\none of python3, python3-all, python3-dev, or python3-all-dev. Which one\ndepends on whether a package supports multiple Python versions, and also\nwhether the package builds Python modules or uses Python only as part of\nthe build process.\n\nPackages that depend on a specific Python version may build-depend on any\nappropriate pythonX.Y or pythonX.Y-dev package instead.\n\nThe condition you see in the context is not a recommendation on what to\nadd. If you see a list, more than likely only one member is needed to make\nthis tag go away. You probably also do not need the :any multiarch\nqualifier, if you see one.\n\nPlease refer to Package relationships (Section 4.2) in the Debian Policy\nManual for details.\n\nVisibility: error\nShow-Always: no\nCheck: debian/rules\nRenamed from: missing-build-dependency missing-python-build-dependency", "note": "4:14.2.0~pre43-0debian12.0.0+7", "pointer": ""}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "This package selects a custom compression level or algorithm in\ndebian/source/options. Please remove the call and let dpkg-deb(1) select\nsuitable defaults.\n\nCustom compression settings are usually chosen for one of two reasons:\n\nHigher compression levels or more advanced algorithms shrink the sizes of\nlarge files, but they can cause problems in the resource constrained\nenvironments used in Debian's buildd infrastructure. For example, higher\nthan expected memory consumption may trigger an FTBFS or a failure to\ninstall.\n\nLower compression levels or less advanced algorithms are sometimes needed\nto support older Debian version. Unfortunately, they also make it harder\nto change the defaults on an archive-wide basis.\n\nSome legitimate use cases trigger this tag. Please override it.\n\nPlease refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)\nmanual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/source-dir\nRenamed from: debian-source-options-has-custom-compression-settings", "comment": "", "note": "compression = \"xz\"", "pointer": "debian/source/options:2"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "", "comment": "", "note": "compression-level = 9", "pointer": "debian/source/options:3"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "debhelper-but-no-misc-depends", "explanation": "The source package uses debhelper, but it does not include ${misc:Depends}\nin the given binary package's debian/control entry. Any debhelper command\nmay add dependencies to ${misc:Depends} that are required for the work\nthat it does, so recommended best practice is to always add\n${misc:Depends} to the dependencies of each binary package if debhelper is\nin use.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "gtk-qt-engine-trinity-dbg", "pointer": ""}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "epoch-change-without-comment", "explanation": "The previous version of this package had a different version epoch (eg.\n2:1.0-1) to the current version but there's no reference to this in the\nchangelog entry.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nLintian looks in this version's changelog entry for the phrase \"epoch\".\n\nVisibility: warning\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "1:0.8-1ubuntu3 -> 4:14.2.0~pre43-0debian12.0.0+7", "pointer": "debian/changelog:1"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "no-nmu-in-changelog", "explanation": "When you NMU a package, that fact should be mentioned on the first line in\nthe changelog entry. Use the words \"NMU\" or \"Non-maintainer upload\" (case\ninsensitive).\n\nMaybe you didn't intend this upload to be a NMU, in that case, please\ndouble-check that the most recent entry in the changelog is byte-for-byte\nidentical to the maintainer or one of the uploaders. If this is a local\npackage (not intended for Debian), you can suppress this warning by\nputting \"local\" in the version number or \"local package\" on the first line\nof the changelog entry.\n\nPlease refer to Using the DELAYED/ queue (Section 5.11.3) in the Debian\nDeveloper's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: nmu\nRenamed from: changelog-should-mention-nmu", "comment": "", "note": "", "pointer": "debian/changelog:1"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "source-nmu-has-incorrect-version-number", "explanation": "A source NMU should have a Debian revision of \"-x.x\" (or \"+nmuX\" for a\nnative package). This is to prevent stealing version numbers from the\nmaintainer.\n\nMaybe you didn't intend this upload to be a NMU, in that case, please\ndouble-check that the most recent entry in the changelog is byte-for-byte\nidentical to the maintainer or one of the uploaders. If this is a local\npackage (not intended for Debian), you can suppress this warning by\nputting \"local\" in the version number or \"local package\" on the first line\nof the changelog entry.\n\nPlease refer to NMUs and debian/changelog (Section 5.11.2) in the Debian\nDeveloper's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: nmu", "comment": "", "note": "4:14.2.0~pre43-0debian12.0.0+7", "pointer": "debian/changelog:1"}, {"severity": "warning", "package": "gtk-qt-engine-trinity", "tag": "unknown-field", "explanation": "See the Policy Manual for a list of the possible fields in a package\ncontrol files.\n\nPlease refer to Binary package control files \u2013 DEBIAN/control (Section\n5.3) in the Debian Policy Manual and Debian source control files \u2013 .dsc\n(Section 5.4) in the Debian Policy Manual for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/unknown\nRenamed from: unknown-field-in-dsc unknown-field-in-control", "comment": "", "note": "Original-Maintainer", "pointer": ""}, {"severity": "info", "package": "gtk-qt-engine-trinity", "tag": "debian-control-has-obsolete-dbg-package", "explanation": "The debian/control file declares a -dbg package.\n\nDebug packages are now generated automatically. It reduces the space\nrequirements for archive mirrors for regular operations.\n\nPlease drop the -dbg package the debian/control file. Do not change it to\na dummy package that depends on the -dbgsym package.\n\nPlease refer to https://wiki.debian.org/AutomaticDebugPackages for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: debug/obsolete", "comment": "", "note": "(in section for gtk-qt-engine-trinity-dbg) Package", "pointer": "debian/control:25"}, {"severity": "info", "package": "gtk-qt-engine-trinity", "tag": "debian-watch-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/watch file. This file is used for automatic detection of new\nupstream versions by the Debian External Health Status project and other\nproject infrastructure. If this package is maintained upstream, please\nconsider adding a debian/watch file to detect new releases.\n\nIf the package is not maintained upstream or if upstream uses a\ndistribution mechanism that cannot be meaningfully monitored by uscan and\nthe Debian External Health Status project, please consider adding a\ndebian/watch file containing only comments documenting the situation.\n\nPlease refer to Upstream source location: debian/watch (Section 4.11) in\nthe Debian Policy Manual and the uscan(1) manual page for details.\n\nVisibility: info\nShow-Always: no\nCheck: debian/watch", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "gtk-qt-engine-trinity", "tag": "no-dh-sequencer", "explanation": "This package does not use the dh sequencer in debian/rules.\n\nWhile maintainers may use a variety of build systems, this one is by far\nthe most popular.\n\nMaintainers are strongly encouraged to use the dh sequencer in new\npackages and convert existing ones when appropriate.\n\nVisibility: info\nShow-Always: no\nCheck: debian/rules/dh-sequencer", "comment": "", "note": "", "pointer": "debian/rules"}, {"severity": "info", "package": "gtk-qt-engine-trinity", "tag": "out-of-date-standards-version", "explanation": "The source package refers to a Standards-Version older than the one that\nwas current at the time the package was created (according to the\ntimestamp of the latest debian/changelog entry). Please consider updating\nthe package to current Policy and setting this control field\nappropriately.\n\nIf the package is already compliant with the current standards, you don't\nhave to re-upload the package just to adjust the Standards-Version control\nfield. However, please remember to update this field next time you upload\nthe package.\n\nSee /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the\ndebian-policy package for a summary of changes in newer versions of\nPolicy.\n\nPlease refer to\nhttps://www.debian.org/doc/debian-policy/upgrading-checklist.html for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: fields/standards-version", "comment": "", "note": "3.8.4 (released 2010-01-27) (current is 4.6.2)", "pointer": ""}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "no-dep5-copyright", "explanation": "This package does not use a machine-readable debian/copyright file.\n\nThis format makes it easier to review licenses and can be easily parsed by\nLintian.\n\nPlease refer to\nhttps://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/copyright/dep5", "comment": "", "note": "", "pointer": "debian/copyright"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "no-homepage-field", "explanation": "This non-native package lacks a Homepage field. If the package has an\nupstream home page that contains useful information or resources for the\nend user, consider adding a Homepage control field to debian/control.\n\nPlease refer to Homepage (Section 5.6.23) in the Debian Policy Manual for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: fields/homepage", "comment": "", "note": "", "pointer": ""}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "package-uses-old-debhelper-compat-version", "explanation": "This package uses a debhelper compatibility level that is no longer\nrecommended. Please consider using the recommended level.\n\nFor most packages, the best way to set the compatibility level is to\nspecify debhelper-compat (= X) as a Build-Depends in debian/control. You\ncan also use the debian/compat file or export DH_COMPAT in debian/rules.\n\nIf no level is selected debhelper defaults to level 1, which is\ndeprecated.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "10", "pointer": ""}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "silent-on-rules-requiring-root", "explanation": "The field Rules-Requires-Root is missing from the file debian/control.\n\nOver time, Debian has successively narrowed the steps for which elevated\nprivileges are required. It speeds up the building of installation\npackages in the archive. Eventually, Debian will switch the default\narchive-wide behaviour to expedite the build process further.\n\nPlease declare explicitly that the sources do not require root privileges.\nYou can use the setting Rules-Requires-Root: no in the source stanza of\ndebian/control, but please verify with diffoscope(1) that the installation\npackages produced are in fact identical.\n\nPlease refer to usr/share/doc/dpkg/rootless-builds.txt.gz, debian/rules\nand Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and\nRules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/control/field/rules-requires-root\nRenamed from: rules-requires-root-missing", "comment": "", "note": "", "pointer": "debian/control"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "This file contains lines with trailing whitespace characters.\n\nWhilst often harmless and unsightly, such extra whitespaces can also cause\ntools to interpret the whitespace characters literally. The tool diff(1)\ndoes not like them, either. They are best avoided.\n\nSome of these problems can be hard to track down.\n\nWhitespace at the end of lines may be removed with the following:\n\n$ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog\n\nIf you use Emacs, you can also use \"M-x wh-cl\" (whitespace-cleanup).\n\nHowever, if you wish to only remove trailing spaces and leave trailing\ntabs (eg. for Makefiles), you can use the following code snippet:\n\n$ sed -i -e 's@[ ]*$@@g' debian/rules\n\nTo remove empty lines from the end of a file, you can use:\n\n$ sed -i -e :a -e '/^\\n*$/{$d;N;};/\\n$/ba' debian/rules\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/trailing-whitespace\nRenamed from: file-contains-trailing-whitespace", "comment": "", "note": "", "pointer": "debian/changelog:124"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:133"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:134"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:149"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:156"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:159"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:160"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:162"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:174"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:189"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:218"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:228"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:232"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:233"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:238"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:295"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:324"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:334"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:338"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:339"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:344"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:403"}, {"severity": "pedantic", "package": "gtk-qt-engine-trinity", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:586"}, {"severity": "experimental", "package": "gtk-qt-engine-trinity", "tag": "upstream-metadata-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/upstream/metadata file.\n\nThe Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to\ncollect meta-information about upstream projects from any source package.\nThis file is in YAML format and it is used in to feed the data in the\nUltimateDebianDatabase. For example, it can contains the way the authors\nwant their software be cited in publications and some bibliographic\nreferences about the software.\n\nPlease add a debian/upstream/metadata file.\n\nPlease refer to https://dep-team.pages.debian.net/deps/dep12/ and\nhttps://wiki.debian.org/UpstreamMetadata for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/upstream/metadata\nThis tag is experimental.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "debhelper-compat-level", "explanation": "This is the debhelper compat level used specified by this package.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "10", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "debian-build-system", "explanation": "This is the build system that Lintian believes the package is using.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "cdbs-with-debhelper.mk", "pointer": "debian/rules"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "mail-contact", "explanation": "This person is a contact in the named group for this package.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nRenamed from: maintainer uploader\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Maintainer \"TDE Debian Team\" <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "number-of-patches", "explanation": "The number of patches according to the debian/patches/series file.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches/count\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "0", "pointer": "debian/patches/series"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "package-is-maintained-by-individual", "explanation": "The package is maintained by an individual according to the\nmaintainer/uploaders fields in the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/vcs\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "patch-system", "explanation": "This package uses the specified patch system (eg. \"quilt\" or \"dpatch\").\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "quilt", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "source-format", "explanation": "This is the source format declared in the package.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/source-dir\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "standards-version", "explanation": "The standards version of the package according to Standards-Version field\nin the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/standards-version\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.8.4", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "The raw but trimmed contents of the named field in the given Deb822 file.\nThe number indicates the section from the top, starting at 1.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/deb822\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "\u00a71 Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, tdelibs14-trinity-dev, libgtk2.0-dev (>= 2.10.1)", "pointer": "debian/control:6"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": "debian/control:4"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Priority optional", "pointer": "debian/control:3"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Section tde", "pointer": "debian/control:2"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Source gtk-qt-engine-trinity", "pointer": "debian/control:1"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Standards-Version 3.8.4", "pointer": "debian/control:7"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 XSBC-Original-Maintainer Bastian Venthur <venthur@debian.org>", "pointer": "debian/control:5"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Architecture any", "pointer": "debian/control:10"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Breaks gtk-qt-engine-trinity (<< 4:14.0.0~)", "pointer": "debian/control:13"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Depends ${shlibs:Depends}, ${misc:Depends}", "pointer": "debian/control:14"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Description theme engine using Qt for GTK+ 2.x and Trinity\\n The GTK-Qt Theme Engine (also known as gtk-qt-engine) is a GTK 2 theme engine\\n that calls Qt to do the actual drawing. This makes your GTK 2 applications\\n look almost like real Qt applications and gives you a more unified desktop\\n experience.\\n .\\n Please note that this package is targeted at Trinity users and therefore provides\\n a way to configure it from within KControl.", "pointer": "debian/control:16"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Package gtk-qt-engine-trinity", "pointer": "debian/control:9"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Provides gtk2-engines-gtk-qt-trinity", "pointer": "debian/control:11"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Recommends gtk3-tqt-engine-trinity", "pointer": "debian/control:15"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Replaces gtk-qt-engine-trinity (<< 4:14.0.0~)", "pointer": "debian/control:12"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Architecture any", "pointer": "debian/control:27"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Depends gtk-qt-engine-trinity (= ${binary:Version}), tdelibs-trinity-dbg", "pointer": "debian/control:29"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Description debugging symbols for the GTK-Qt Theme Engine", "pointer": "debian/control:30"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Package gtk-qt-engine-trinity-dbg", "pointer": "debian/control:25"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Priority extra", "pointer": "debian/control:28"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Section devel", "pointer": "debian/control:26"}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "These are the raw but trimmed contents of the named field in the package's\nprimary control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/trimmed\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Architecture any", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Binary gtk-qt-engine-trinity, gtk-qt-engine-trinity-dbg", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, tdelibs14-trinity-dev, libgtk2.0-dev (>= 2.10.1)", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha1 1e69e883eed102d95de25c2b0bcc8c1b063191c7 61916 gtk-qt-engine-trinity_14.2.0~pre43.orig.tar.xz\\n 5d43630aa85b1470682020460195d2b5d0719960 7116 gtk-qt-engine-trinity_14.2.0~pre43-0debian12.0.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha256 f177a8de5f1d9a748013b6079ee69bdef15cfd0cc0d6f5245c5ba6ae545e9bce 61916 gtk-qt-engine-trinity_14.2.0~pre43.orig.tar.xz\\n ee39ee973b369ff67961bb35c260ae4e333345935da852b03897d8f75366b610 7116 gtk-qt-engine-trinity_14.2.0~pre43-0debian12.0.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Files fafd96c3af15e4f9f45dbd16de154b26 61916 gtk-qt-engine-trinity_14.2.0~pre43.orig.tar.xz\\n 4f623343d32bca5e84323f7e816b152f 7116 gtk-qt-engine-trinity_14.2.0~pre43-0debian12.0.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Format 3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Original-Maintainer Bastian Venthur <venthur@debian.org>", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Package-List gtk-qt-engine-trinity deb tde optional arch=any\\n gtk-qt-engine-trinity-dbg deb devel extra arch=any", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Source gtk-qt-engine-trinity", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Standards-Version 3.8.4", "pointer": ""}, {"severity": "classification", "package": "gtk-qt-engine-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Version 4:14.2.0~pre43-0debian12.0.0+7", "pointer": ""}], "summary": {"tags_count_by_severity": {"error": 2, "warning": 8, "info": 4, "pedantic": 27, "experimental": 1, "overridden": 0, "classification": 42}, "package_filename": {"gtk-qt-engine-trinity": "gtk-qt-engine-trinity_14.2.0~pre43-0debian12.0.0+7.dsc"}, "tags_found": ["binary-nmu-debian-revision-in-source", "custom-compression-in-debian-source-options", "debhelper-but-no-misc-depends", "debhelper-compat-level", "debian-build-system", "debian-control-has-obsolete-dbg-package", "debian-watch-file-is-missing", "epoch-change-without-comment", "epoch-changed-but-upstream-version-did-not-go-backwards", "mail-contact", "no-dep5-copyright", "no-dh-sequencer", "no-homepage-field", "no-nmu-in-changelog", "number-of-patches", "out-of-date-standards-version", "package-is-maintained-by-individual", "package-uses-old-debhelper-compat-version", "patch-system", "rules-require-build-prerequisite", "silent-on-rules-requiring-root", "source-format", "source-nmu-has-incorrect-version-number", "standards-version", "trailing-whitespace", "trimmed-deb822-field", "trimmed-field", "unknown-field", "upstream-metadata-file-is-missing"], "overridden_tags_found": [], "lintian_version": "2.116.3+deb12u1", "distribution": "debian:bookworm"}, "version": 1}