lintian.txt

N:
E: libkexiv2-3-trinity: dir-or-file-in-opt [opt/trinity/]
N: 
N:   Debian packages should not install into /opt, because it is reserved for
N:   add-on software.
N: 
N:   Please refer to /opt : Add-on application software packages (Section 3.13)
N:   in the Filesystem Hierarchy Standard for details.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: files/hierarchy/standard
N: 
N:
E: libkexiv2-3-trinity: dir-or-file-in-opt [opt/trinity/lib/]
N:
E: libkexiv2-3-trinity: dir-or-file-in-opt [opt/trinity/lib/libkexiv2.so.5.0.0]
N:
E: libkexiv2-3-trinity: dir-or-file-in-opt [opt/trinity/lib/libkexiv2.so.5]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/include/]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/include/libkexiv2/]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/include/libkexiv2/kexiv2.h]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/include/libkexiv2/libkexiv2_export.h]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/include/libkexiv2/version.h]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/lib/]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/lib/libkexiv2.la]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/lib/libkexiv2.so]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/lib/pkgconfig/]
N:
E: libkexiv2-3-trinity-dev: dir-or-file-in-opt [opt/trinity/lib/pkgconfig/libkexiv2.pc]
N:
E: libkexiv2-trinity source: epoch-changed-but-upstream-version-did-not-go-backwards 0.1.7-0ubuntu4 -> 4:14.2.0~pre11-0ubuntu24.04.0+8 [debian/changelog:1]
N: 
N:   The previous version of this package had a different version epoch to the
N:   current version but the upstream version did not go "backwards". For
N:   example, the previous package version was "1:1.0-1" and the current
N:   version is "2:2.0-1".
N:   
N:   This was likely an accidental bump or addition of an epoch.
N:   
N:   Epochs exist to cope with changes to the upstream version numbering
N:   scheme. Whilst they are a powerful tool, increasing or adding an epoch has
N:   many downsides including causing issues with versioned dependencies, being
N:   misleading to users and being aesthetically unappealing. Whilst they
N:   should be avoided, valid reasons to add or increment the epoch include:
N:   
N:    - Upstream changed their versioning scheme in a way that makes the
N:      latest version lower than the previous one.
N:    - You need to permanently revert to a lower upstream version.
N:   
N:   Temporary revertions (eg. after an NMU) should use not modify or introduce
N:   an epoch - please use the CURRENT+reallyFORMER until you can upload the
N:   latest version again.
N:   
N:   If you are unsure whether you need to increase the epoch for a package,
N:   please consult the debian-devel mailing list.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: debian/changelog
N: 
N:
E: libkexiv2-trinity source: rules-require-build-prerequisite (does not satisfy cdbs:any) [debian/rules]
N: 
N:   
N:   The code in debian/rules requires a prerequisite
N:   that is not presently listed in the package's Build-Depends.
N:   
N:   In the special case of Python, affected packages should Build-Depend on
N:   one of python3, python3-all, python3-dev, or python3-all-dev. Which one
N:   depends on whether a package supports multiple Python versions, and also
N:   whether the package builds Python modules or uses Python only as part of
N:   the build process.
N:   
N:   Packages that depend on a specific Python version may build-depend on any
N:   appropriate pythonX.Y or pythonX.Y-dev package instead.
N:   
N:   The condition you see in the context is not a recommendation on what to
N:   add. If you see a list, more than likely only one member is needed to make
N:   this tag go away. You probably also do not need the :any multiarch
N:   qualifier, if you see one.
N: 
N:   Please refer to Package relationships (Section 4.2) in the Debian Policy
N:   Manual for details.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: debian/rules
N:   Renamed from: missing-build-dependency missing-python-build-dependency
N: 
N:
W: libkexiv2-trinity source: binary-nmu-debian-revision-in-source 4:14.2.0~pre11-0ubuntu24.04.0+8
N: 
N:   The version number of your source package ends in +b and a number or has a
N:   Debian revision containing three parts. These version numbers are used by
N:   binary NMUs and should not be used as the source version. (The +b form is
N:   the current standard; the three-part version number now obsolete.)
N: 
N:   Please refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the
N:   Debian Developer's Reference for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: fields/version
N: 
N:
W: libkexiv2-trinity source: custom-compression-in-debian-source-options compression = "xz" [debian/source/options:2]
N: 
N:   This package selects a custom compression level or algorithm in
N:   debian/source/options. Please remove the call and let dpkg-deb(1) select
N:   suitable defaults.
N:   
N:   Custom compression settings are usually chosen for one of two reasons:
N:   
N:   Higher compression levels or more advanced algorithms shrink the sizes of
N:   large files, but they can cause problems in the resource constrained
N:   environments used in Debian's buildd infrastructure. For example, higher
N:   than expected memory consumption may trigger an FTBFS or a failure to
N:   install.
N:   
N:   Lower compression levels or less advanced algorithms are sometimes needed
N:   to support older Debian version. Unfortunately, they also make it harder
N:   to change the defaults on an archive-wide basis.
N:   
N:   Some legitimate use cases trigger this tag. Please override it.
N: 
N:   Please refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)
N:   manual page for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: debian/source-dir
N:   Renamed from: debian-source-options-has-custom-compression-settings
N: 
N:
W: libkexiv2-trinity source: custom-compression-in-debian-source-options compression-level = 9 [debian/source/options:3]
N:
W: libkexiv2-trinity source: debhelper-but-no-misc-depends libkexiv2-3-trinity
N: 
N:   The source package uses debhelper, but it does not include ${misc:Depends}
N:   in the given binary package's debian/control entry. Any debhelper command
N:   may add dependencies to ${misc:Depends} that are required for the work
N:   that it does, so recommended best practice is to always add
N:   ${misc:Depends} to the dependencies of each binary package if debhelper is
N:   in use.
N: 
N:   Please refer to the debhelper(7) manual page for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: debhelper
N: 
N:
W: libkexiv2-trinity source: debhelper-but-no-misc-depends libkexiv2-3-trinity-dev
N:
W: libkexiv2-trinity source: epoch-change-without-comment 0.1.7-0ubuntu4 -> 4:14.2.0~pre11-0ubuntu24.04.0+8 [debian/changelog:1]
N: 
N:   The previous version of this package had a different version epoch (eg.
N:   2:1.0-1) to the current version but there's no reference to this in the
N:   changelog entry.
N:   
N:   Epochs exist to cope with changes to the upstream version numbering
N:   scheme. Whilst they are a powerful tool, increasing or adding an epoch has
N:   many downsides including causing issues with versioned dependencies, being
N:   misleading to users and being aesthetically unappealing. Whilst they
N:   should be avoided, valid reasons to add or increment the epoch include:
N:   
N:    - Upstream changed their versioning scheme in a way that makes the
N:      latest version lower than the previous one.
N:    - You need to permanently revert to a lower upstream version.
N:   
N:   Temporary revertions (eg. after an NMU) should use not modify or introduce
N:   an epoch - please use the CURRENT+reallyFORMER until you can upload the
N:   latest version again.
N:   
N:   If you are unsure whether you need to increase the epoch for a package,
N:   please consult the debian-devel mailing list.
N:   
N:   Lintian looks in this version's changelog entry for the phrase "epoch".
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: debian/changelog
N: 
N:
W: libkexiv2-3-trinity: hardening-no-relro [opt/trinity/lib/libkexiv2.so.5.0.0]
N: 
N:   This package provides an ELF binary that lacks the "read-only relocation"
N:   link flag. This package was likely not built with the default Debian
N:   compiler flags defined by dpkg-buildflags. If built using dpkg-buildflags
N:   directly, be sure to import LDFLAGS.
N: 
N:   Please refer to https://wiki.debian.org/Hardening for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: binaries/hardening
N: 
N:
W: libkexiv2-3-trinity: package-has-unnecessary-activation-of-ldconfig-trigger
N: 
N:   The package activates the ldconfig trigger even though no shared libraries
N:   are installed in a directory controlled by the dynamic library loader.
N:   
N:   Note this may be triggered by a bug in debhelper, that causes it to
N:   auto-generate an ldconfig trigger for packages that do not need it.
N: 
N:   Please refer to ldconfig (Section 8.1.1) in the Debian Policy Manual and
N:   Bug#204975 for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: libraries/shared/trigger/ldconfig
N: 
N:
W: libkexiv2-3-trinity-dev: package-has-unnecessary-activation-of-ldconfig-trigger
N:
W: libkexiv2-3-trinity: package-relation-with-self Breaks: libkexiv2-3-trinity (<< 4:14.0.0~)
N: 
N:   The package declares a relationship with itself. This is not very useful
N:   except in the case of a package Conflicting with itself if its package
N:   name doubles as a virtual package.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: fields/package-relations
N: 
N:
W: libkexiv2-3-trinity-dev: package-relation-with-self Breaks: libkexiv2-3-trinity-dev (<< 4:14.0.0~)
N:
I: libkexiv2-trinity source: adopted-extended-field (in section for source) XSBC-Original-Maintainer [debian/control:5]
N: 
N:   A field in debian/control has an extension prefix but is also known
N:   without it.
N:   
N:   Extension prefixes like XS-* or XC-* allow experimental fields to
N:   propagate to the right place when packages are built with dpkg. In this
N:   case, however, the field is also known without the prefix. In all
N:   likelihood the field was permanently adopted, and dpkg learned how to deal
N:   with it.
N:   
N:   Please consider removing the extension prefix for the field name.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/adopted
N:   Renamed from: xc-package-type-in-debian-control
N:   xs-testsuite-field-in-debian-control xs-vcs-field-in-debian-control
N: 
N:
I: libkexiv2-trinity source: debian-watch-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/watch file. This file is used for automatic detection of new
N:   upstream versions by the Debian External Health Status project and other
N:   project infrastructure. If this package is maintained upstream, please
N:   consider adding a debian/watch file to detect new releases.
N:   
N:   If the package is not maintained upstream or if upstream uses a
N:   distribution mechanism that cannot be meaningfully monitored by uscan and
N:   the Debian External Health Status project, please consider adding a
N:   debian/watch file containing only comments documenting the situation.
N: 
N:   Please refer to Upstream source location: debian/watch (Section 4.11) in
N:   the Debian Policy Manual and the uscan(1) manual page for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/watch
N: 
N:
I: libkexiv2-3-trinity: hardening-no-bindnow [opt/trinity/lib/libkexiv2.so.5.0.0]
N: 
N:   This package provides an ELF binary that lacks the "bindnow" linker flag.
N:   
N:   This is needed (together with "relro") to make the "Global Offset Table"
N:   (GOT) fully read-only. The bindnow feature trades startup time for
N:   improved security. Please consider enabling this feature or consider
N:   overriding the tag (possibly with a comment about why).
N:   
N:   If you use dpkg-buildflags, you may have to add hardening=+bindnow or
N:   hardening=+all to DEB_BUILD_MAINT_OPTIONS.
N:   
N:   The relevant compiler flags are set in LDFLAGS.
N: 
N:   Please refer to https://wiki.debian.org/Hardening for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: binaries/hardening
N: 
N:
I: libkexiv2-trinity source: installable-field-mirrors-source (in section for libkexiv2-3-trinity) Section [debian/control:24]
N: 
N:   The named field for an installation package in debian/control has the same
N:   value as the one inherited from the source paragraph.
N:   
N:   In the interest of shorter and clearer files, you may wish to take
N:   advantage of the inheritance rules. This field is redundant.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/redundant
N:   Renamed from: binary-control-field-duplicates-source
N: 
N:
I: libkexiv2-trinity source: no-dh-sequencer [debian/rules]
N: 
N:   This package does not use the dh sequencer in debian/rules.
N:   
N:   While maintainers may use a variety of build systems, this one is by far
N:   the most popular.
N:   
N:   Maintainers are strongly encouraged to use the dh sequencer in new
N:   packages and convert existing ones when appropriate.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/rules/dh-sequencer
N: 
N:
I: libkexiv2-trinity source: out-of-date-standards-version 3.8.4 (released 2010-01-27) (current is 4.6.2)
N: 
N:   The source package refers to a Standards-Version older than the one that
N:   was current at the time the package was created (according to the
N:   timestamp of the latest debian/changelog entry). Please consider updating
N:   the package to current Policy and setting this control field
N:   appropriately.
N:   
N:   If the package is already compliant with the current standards, you don't
N:   have to re-upload the package just to adjust the Standards-Version control
N:   field. However, please remember to update this field next time you upload
N:   the package.
N:   
N:   See /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the
N:   debian-policy package for a summary of changes in newer versions of
N:   Policy.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/debian-policy/upgrading-checklist.html for
N:   details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/standards-version
N: 
N:
P: libkexiv2-trinity source: co-maintained-package-with-no-vcs-fields
N: 
N:   Based on the content of the maintainer and uploader fields this package is
N:   co-maintained but there are no Vcs-* fields.
N:   
N:   It is recommended that shared maintenance of packages are co-ordinated via
N:   a revision control system.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: fields/vcs
N:   Renamed from: co-maintained-package-with-no-vcs-headers
N: 
N:
P: libkexiv2-trinity source: no-dep5-copyright [debian/copyright]
N: 
N:   This package does not use a machine-readable debian/copyright file.
N:   
N:   This format makes it easier to review licenses and can be easily parsed by
N:   Lintian.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/copyright/dep5
N: 
N:
P: libkexiv2-trinity source: package-uses-old-debhelper-compat-version 10
N: 
N:   This package uses a debhelper compatibility level that is no longer
N:   recommended. Please consider using the recommended level.
N:   
N:   For most packages, the best way to set the compatibility level is to
N:   specify debhelper-compat (= X) as a Build-Depends in debian/control. You
N:   can also use the debian/compat file or export DH_COMPAT in debian/rules.
N:   
N:   If no level is selected debhelper defaults to level 1, which is
N:   deprecated.
N: 
N:   Please refer to the debhelper(7) manual page for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debhelper
N: 
N:
P: libkexiv2-trinity source: silent-on-rules-requiring-root [debian/control]
N: 
N:   The field Rules-Requires-Root is missing from the file debian/control.
N:   
N:   Over time, Debian has successively narrowed the steps for which elevated
N:   privileges are required. It speeds up the building of installation
N:   packages in the archive. Eventually, Debian will switch the default
N:   archive-wide behaviour to expedite the build process further.
N:   
N:   Please declare explicitly that the sources do not require root privileges.
N:   You can use the setting Rules-Requires-Root: no in the source stanza of
N:   debian/control, but please verify with diffoscope(1) that the installation
N:   packages produced are in fact identical.
N: 
N:   Please refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules
N:   and Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and
N:   Rules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/control/field/rules-requires-root
N:   Renamed from: rules-requires-root-missing
N: 
N:
P: libkexiv2-trinity source: trailing-whitespace [debian/changelog:78]
N: 
N:   This file contains lines with trailing whitespace characters.
N:   
N:   Whilst often harmless and unsightly, such extra whitespaces can also cause
N:   tools to interpret the whitespace characters literally. The tool diff(1)
N:   does not like them, either. They are best avoided.
N:   
N:   Some of these problems can be hard to track down.
N:   
N:   Whitespace at the end of lines may be removed with the following:
N:   
N:    $ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog
N:   
N:   If you use Emacs, you can also use "M-x wh-cl" (whitespace-cleanup).
N:   
N:   However, if you wish to only remove trailing spaces and leave trailing
N:   tabs (eg. for Makefiles), you can use the following code snippet:
N:   
N:    $ sed -i -e 's@[ ]*$@@g' debian/rules
N:   
N:   To remove empty lines from the end of a file, you can use:
N:   
N:    $ sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' debian/rules
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/trailing-whitespace
N:   Renamed from: file-contains-trailing-whitespace
N: 
N:
X: libkexiv2-3-trinity-dev: package-contains-no-arch-dependent-files
N: 
N:   All files in this package are architecture-independent, but the package is
N:   not marked Architecture: all.
N:   
N:   The package should probably be marked Architecture: all.
N: 
N:   Please refer to Architecture (Section 5.6.8) in the Debian Policy Manual
N:   for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: files/architecture
N:   This tag is experimental.
N: 
N:
X: libkexiv2-trinity source: upstream-metadata-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/upstream/metadata file.
N:   
N:   The Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to
N:   collect meta-information about upstream projects from any source package.
N:   This file is in YAML format and it is used in to feed the data in the
N:   UltimateDebianDatabase. For example, it can contains the way the authors
N:   want their software be cited in publications and some bibliographic
N:   references about the software.
N:   
N:   Please add a debian/upstream/metadata file.
N: 
N:   Please refer to https://dep-team.pages.debian.net/deps/dep12/ and
N:   https://wiki.debian.org/UpstreamMetadata for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/upstream/metadata
N:   This tag is experimental.
N: 
N:
C: libkexiv2-3-trinity: control-tarball-compression-format zst
N: 
N:   This is the compressor format used for the control.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-3-trinity-dev: control-tarball-compression-format zst
N:
C: libkexiv2-3-trinity: data-tarball-compression-format zst
N: 
N:   This is the compressor format used for the data.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-3-trinity-dev: data-tarball-compression-format zst
N:
C: libkexiv2-trinity source: debhelper-compat-level 10
N: 
N:   This is the debhelper compat level used specified by this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: debian-build-system cdbs-with-debhelper.mk [debian/rules]
N: 
N:   This is the build system that Lintian believes the package is using.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N: 
N:   This person is a contact in the named group for this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/mail-address
N:   Renamed from: maintainer uploader
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: mail-contact Uploaders "Achim Bohnet" <ach@mpe.mpg.de>
N:
C: libkexiv2-trinity source: mail-contact Uploaders "Mark Purcell" <msp@debian.org>
N:
C: libkexiv2-3-trinity: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libkexiv2-3-trinity-dev: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: libkexiv2-3-trinity: no-ctrl-scripts
N: 
N:   The package does not rely on any maintainer scripts (or other executable
N:   control files).
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: control-files
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-3-trinity-dev: no-ctrl-scripts
N:
C: libkexiv2-trinity source: number-of-patches 0 [debian/patches/series]
N: 
N:   The number of patches according to the debian/patches/series file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches/count
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: package-is-co-maintained (with 2 uploaders)
N: 
N:   The package is co-maintained but not team-maintained according to the
N:   maintainer/uploaders fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-3-trinity: package-is-maintained-by-individual
N: 
N:   The package is maintained by an individual according to the
N:   maintainer/uploaders fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-3-trinity-dev: package-is-maintained-by-individual
N:
C: libkexiv2-trinity source: patch-system quilt
N: 
N:   This package uses the specified patch system (eg. "quilt" or "dpatch").
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: source-format 3.0 (quilt)
N: 
N:   This is the source format declared in the package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/source-dir
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: standards-version 3.8.4
N: 
N:   The standards version of the package according to Standards-Version field
N:   in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/standards-version
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libexiv2-dev, tdelibs14-trinity-dev [debian/control:7]
N: 
N:   The raw but trimmed contents of the named field in the given Deb822 file.
N:   The number indicates the section from the top, starting at 1.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/deb822
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Homepage http://www.kipi-plugins.org/ [debian/control:9]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Maintainer TDE Debian Team <team-debian@trinitydesktop.org> [debian/control:4]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Priority optional [debian/control:3]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Section libs [debian/control:2]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Source libkexiv2-trinity [debian/control:1]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Standards-Version 3.8.4 [debian/control:8]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 Uploaders Achim Bohnet <ach@mpe.mpg.de>, Mark Purcell <msp@debian.org> [debian/control:6]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §1 XSBC-Original-Maintainer Debian KDE Extras Team <pkg-kde-extras@lists.alioth.debian.org> [debian/control:5]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Architecture any [debian/control:13]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Breaks libkexiv2-3-kde3-dev (<< 4:14.0.0~), libkexiv2-3-trinity-dev (<< 4:14.0.0~) [debian/control:15]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Depends libkexiv2-3-trinity (= ${binary:Version}), pkgconf [debian/control:16]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Description Qt like interface for the libexiv2 library (development) [Trinity]\n libkexif2-dev contains development files and documentation for libkexiv2\n library.  The library documentation is available on kexiv2.h header file.\n .\n Libkexif is a wrapper around Exiv2 library to manipulate pictures metadata. [debian/control:17]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Package libkexiv2-3-trinity-dev [debian/control:11]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Replaces libkexiv2-3-kde3-dev (<< 4:14.0.0~), libkexiv2-3-trinity-dev (<< 4:14.0.0~) [debian/control:14]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §2 Section libdevel [debian/control:12]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Architecture any [debian/control:25]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Breaks libkexiv2-3-kde3 (<< 4:14.0.0~), libkexiv2-3-trinity (<< 4:14.0.0~) [debian/control:27]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Depends ${shlibs:Depends} [debian/control:28]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Description Qt like interface for the libexiv2 library (runtime) [Trinity]\n libkexif2 contains the library of libkexiv2.\n .\n Libkexif is a wrapper around Exiv2 library to manipulate pictures metadata. [debian/control:29]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Package libkexiv2-3-trinity [debian/control:23]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Replaces libkexiv2-3-kde3 (<< 4:14.0.0~), libkexiv2-3-trinity (<< 4:14.0.0~) [debian/control:26]
N:
C: libkexiv2-trinity source: trimmed-deb822-field §3 Section libs [debian/control:24]
N:
C: libkexiv2-trinity source: trimmed-field Architecture any
N: 
N:   These are the raw but trimmed contents of the named field in the package's
N:   primary control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/trimmed
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: libkexiv2-trinity source: trimmed-field Binary libkexiv2-3-trinity-dev, libkexiv2-3-trinity
N:
C: libkexiv2-trinity source: trimmed-field Build-Depends tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, libexiv2-dev, tdelibs14-trinity-dev
N:
C: libkexiv2-trinity source: trimmed-field Checksums-Sha1 ec410247a0907202768f9247292ef4d60266b9e9 30312 libkexiv2-trinity_14.2.0~pre11.orig.tar.xz\n e94e288d24c532b19ae5da007da375cf19760bd7 4188 libkexiv2-trinity_14.2.0~pre11-0ubuntu24.04.0+8.debian.tar.xz
N:
C: libkexiv2-trinity source: trimmed-field Checksums-Sha256 343d825063b8b973d2fef5d013dcd7d23e7d5b52f1eaa9b7cbd930f8a197f06e 30312 libkexiv2-trinity_14.2.0~pre11.orig.tar.xz\n 0ca2bff13ca0a04bfff8254d7a475e2a2bd8cddd8663355d53a82fe07e084677 4188 libkexiv2-trinity_14.2.0~pre11-0ubuntu24.04.0+8.debian.tar.xz
N:
C: libkexiv2-trinity source: trimmed-field Files 9e06e413fd54c5dd4adf85a246aa1e08 30312 libkexiv2-trinity_14.2.0~pre11.orig.tar.xz\n e1296d28b90a9151a7d3149ede117a60 4188 libkexiv2-trinity_14.2.0~pre11-0ubuntu24.04.0+8.debian.tar.xz
N:
C: libkexiv2-trinity source: trimmed-field Format 3.0 (quilt)
N:
C: libkexiv2-trinity source: trimmed-field Homepage http://www.kipi-plugins.org/
N:
C: libkexiv2-trinity source: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libkexiv2-trinity source: trimmed-field Original-Maintainer Debian KDE Extras Team <pkg-kde-extras@lists.alioth.debian.org>
N:
C: libkexiv2-trinity source: trimmed-field Package-List libkexiv2-3-trinity deb libs optional arch=any\n libkexiv2-3-trinity-dev deb libdevel optional arch=any
N:
C: libkexiv2-trinity source: trimmed-field Source libkexiv2-trinity
N:
C: libkexiv2-trinity source: trimmed-field Standards-Version 3.8.4
N:
C: libkexiv2-trinity source: trimmed-field Uploaders Achim Bohnet <ach@mpe.mpg.de>, Mark Purcell <msp@debian.org>
N:
C: libkexiv2-trinity source: trimmed-field Version 4:14.2.0~pre11-0ubuntu24.04.0+8
N:
C: libkexiv2-3-trinity: trimmed-field Architecture amd64
N:
C: libkexiv2-3-trinity: trimmed-field Breaks libkexiv2-3-kde3 (<< 4:14.0.0~), libkexiv2-3-trinity (<< 4:14.0.0~)
N:
C: libkexiv2-3-trinity: trimmed-field Depends libc6 (>= 2.33), libexiv2-27 (>= 0.27.2), libgcc-s1 (>= 3.3.1), libstdc++6 (>= 13.1), libtqt3-mt (>= 4:14.2.0~pre257), tdelibs14-trinity (>= 4:14.2.0~pre291)
N:
C: libkexiv2-3-trinity: trimmed-field Description Qt like interface for the libexiv2 library (runtime) [Trinity]\n libkexif2 contains the library of libkexiv2.\n .\n Libkexif is a wrapper around Exiv2 library to manipulate pictures metadata.
N:
C: libkexiv2-3-trinity: trimmed-field Homepage http://www.kipi-plugins.org/
N:
C: libkexiv2-3-trinity: trimmed-field Installed-Size 165
N:
C: libkexiv2-3-trinity: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libkexiv2-3-trinity: trimmed-field Original-Maintainer Debian KDE Extras Team <pkg-kde-extras@lists.alioth.debian.org>
N:
C: libkexiv2-3-trinity: trimmed-field Package libkexiv2-3-trinity
N:
C: libkexiv2-3-trinity: trimmed-field Priority optional
N:
C: libkexiv2-3-trinity: trimmed-field Replaces libkexiv2-3-kde3 (<< 4:14.0.0~), libkexiv2-3-trinity (<< 4:14.0.0~)
N:
C: libkexiv2-3-trinity: trimmed-field Section libs
N:
C: libkexiv2-3-trinity: trimmed-field Source libkexiv2-trinity
N:
C: libkexiv2-3-trinity: trimmed-field Version 4:14.2.0~pre11-0ubuntu24.04.0+8
N:
C: libkexiv2-3-trinity-dev: trimmed-field Architecture amd64
N:
C: libkexiv2-3-trinity-dev: trimmed-field Breaks libkexiv2-3-kde3-dev (<< 4:14.0.0~), libkexiv2-3-trinity-dev (<< 4:14.0.0~)
N:
C: libkexiv2-3-trinity-dev: trimmed-field Depends libkexiv2-3-trinity (= 4:14.2.0~pre11-0ubuntu24.04.0+8), pkgconf
N:
C: libkexiv2-3-trinity-dev: trimmed-field Description Qt like interface for the libexiv2 library (development) [Trinity]\n libkexif2-dev contains development files and documentation for libkexiv2\n library.  The library documentation is available on kexiv2.h header file.\n .\n Libkexif is a wrapper around Exiv2 library to manipulate pictures metadata.
N:
C: libkexiv2-3-trinity-dev: trimmed-field Homepage http://www.kipi-plugins.org/
N:
C: libkexiv2-3-trinity-dev: trimmed-field Installed-Size 53
N:
C: libkexiv2-3-trinity-dev: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: libkexiv2-3-trinity-dev: trimmed-field Original-Maintainer Debian KDE Extras Team <pkg-kde-extras@lists.alioth.debian.org>
N:
C: libkexiv2-3-trinity-dev: trimmed-field Package libkexiv2-3-trinity-dev
N:
C: libkexiv2-3-trinity-dev: trimmed-field Priority optional
N:
C: libkexiv2-3-trinity-dev: trimmed-field Replaces libkexiv2-3-kde3-dev (<< 4:14.0.0~), libkexiv2-3-trinity-dev (<< 4:14.0.0~)
N:
C: libkexiv2-3-trinity-dev: trimmed-field Section libdevel
N:
C: libkexiv2-3-trinity-dev: trimmed-field Source libkexiv2-trinity
N:
C: libkexiv2-3-trinity-dev: trimmed-field Version 4:14.2.0~pre11-0ubuntu24.04.0+8