1{"tags": [{"severity": "error", "package": "desktop-effects-tde-trinity", "tag": "epoch-changed-but-upstream-version-did-not-go-backwards", "explanation": "The previous version of this package had a different version epoch to the\ncurrent version but the upstream version did not go \"backwards\". For\nexample, the previous package version was \"1:1.0-1\" and the current\nversion is \"2:2.0-1\".\n\nThis was likely an accidental bump or addition of an epoch.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nVisibility: error\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "0.4-7.4 -> 4:14.2.0~pre35-0ubuntu22.04.0+7", "pointer": ""}, {"severity": "error", "package": "desktop-effects-tde-trinity", "tag": "missing-build-depends-for-clean-target-in-debian-rules", "explanation": "The specified condition must be satisfied to run the clean target in\ndebian/rules.\n\nPlease add a suitable prerequisite to Build-Depends (and not\nBuild-Depends-Indep) even if no architecture-dependent packages are being\nbuilt.\n\nThe condition you see in the context is not a recommendation on what to\nadd. If you see a list, more than likely only one member is needed to make\nthis tag go away. You probably also do not need the :any multiarch\nacceptor, if you see one.\n\nPlease refer to Debian Policy Manual section 7.7 for details.\n\nVisibility: error\nShow-Always: no\nCheck: debian/rules\nRenamed from: clean-should-be-satisfied-by-build-depends", "comment": "", "note": "(does not satisfy debhelper | debhelper-compat)", "pointer": ""}, {"severity": "error", "package": "desktop-effects-tde-trinity", "tag": "rules-require-build-prerequisite", "explanation": "", "comment": "", "note": "(does not satisfy cdbs)", "pointer": ""}, {"severity": "warning", "package": "desktop-effects-tde-trinity", "tag": "binary-nmu-debian-revision-in-source", "explanation": "The version number of your source package ends in +b and a number or has a\nDebian revision containing three parts. These version numbers are used by\nbinary NMUs and should not be used as the source version. (The +b form is\nthe current standard; the three-part version number now obsolete.)\n\nPlease refer to Debian Developer's Reference section 5.10.2.1 for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/version", "comment": "The code in debian/rules requires a prerequisite\nthat is not presently listed in the package's Build-Depends.\n\nIn the special case of Python, affected packages should Build-Depend on\none of python3, python3-all, python3-dev, or python3-all-dev. Which one\ndepends on whether a package supports multiple Python versions, and also\nwhether the package builds Python modules or uses Python only as part of\nthe build process.\n\nPackages that depend on a specific Python version may build-depend on any\nappropriate pythonX.Y or pythonX.Y-dev package instead.\n\nThe condition you see in the context is not a recommendation on what to\nadd. If you see a list, more than likely only one member is needed to make\nthis tag go away. You probably also do not need the :any multiarch\nacceptor, if you see one.\n\nPlease refer to Debian Policy Manual section 4.2 for details.\n\nVisibility: error\nShow-Always: no\nCheck: debian/rules\nRenamed from: missing-build-dependency missing-python-build-dependency", "note": "4:14.2.0~pre35-0ubuntu22.04.0+7", "pointer": ""}, {"severity": "warning", "package": "desktop-effects-tde-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "This package selects a custom compression level or algorithm in\ndebian/source/options. Please remove the call and let dpkg-deb(1) select\nsuitable defaults.\n\nCustom compression settings are usually chosen for one of two reasons:\n\nHigher compression levels or more advanced algorithms shrink the sizes of\nlarge files, but they can cause problems in the resource constrained\nenvironments used in Debian's buildd infrastructure. For example, higher\nthan expected memory consumption may trigger an FTBFS or a failure to\ninstall.\n\nLower compression levels or less advanced algorithms are sometimes needed\nto support older Debian version. Unfortunately, they also make it harder\nto change the defauls on an archive-wide basis.\n\nSome legitimate use cases trigger this tag. Please override it.\n\nPlease refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)\nmanual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/source-dir\nRenamed from: debian-source-options-has-custom-compression-settings", "comment": "", "note": "compression = \"xz\" (line 2)", "pointer": ""}, {"severity": "warning", "package": "desktop-effects-tde-trinity", "tag": "custom-compression-in-debian-source-options", "explanation": "", "comment": "", "note": "compression-level = 9 (line 3)", "pointer": ""}, {"severity": "warning", "package": "desktop-effects-tde-trinity", "tag": "debhelper-but-no-misc-depends", "explanation": "The source package uses debhelper, but it does not include ${misc:Depends}\nin the given binary package's debian/control entry. Any debhelper command\nmay add dependencies to ${misc:Depends} that are required for the work\nthat it does, so recommended best practice is to always add\n${misc:Depends} to the dependencies of each binary package if debhelper is\nin use.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "desktop-effects-tde-trinity", "pointer": ""}, {"severity": "warning", "package": "desktop-effects-tde-trinity", "tag": "epoch-change-without-comment", "explanation": "The previous version of this package had a different version epoch (eg.\n2:1.0-1) to the current version but there's no reference to this in the\nchangelog entry.\n\nEpochs exist to cope with changes to the upstream version numbering\nscheme. Whilst they are a powerful tool, increasing or adding an epoch has\nmany downsides including causing issues with versioned dependencies, being\nmisleading to users and being aesthetically unappealing. Whilst they\nshould be avoided, valid reasons to add or increment the epoch include:\n\n- Upstream changed their versioning scheme in a way that makes the\nlatest version lower than the previous one.\n- You need to permanently revert to a lower upstream version.\n\nTemporary revertions (eg. after an NMU) should use not modify or introduce\nan epoch - please use the CURRENT+reallyFORMER until you can upload the\nlatest version again.\n\nIf you are unsure whether you need to increase the epoch for a package,\nplease consult the debian-devel mailing list.\n\nLintian looks in this version's changelog entry for the phrase \"epoch\".\n\nVisibility: warning\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "0.4-7.4 -> 4:14.2.0~pre35-0ubuntu22.04.0+7", "pointer": ""}, {"severity": "info", "package": "desktop-effects-tde-trinity", "tag": "build-depends-on-python-dev-with-no-arch-any", "explanation": "The given package appears to have a Python development package\n(python3-dev, python3-all-dev or pythonX.Y-dev) listed in its\nBuild-Depends or Build-Depends-Indep fields, but only Architecture: all\npackages are built by this source package. Python applications and modules\ndo not usually require those dev packages, so you should consider removing\nthem in favour of python3, python3-all or pythonX.Y.\n\nIf you are building a Python extension instead, you should have\ndevelopment packages listed in Build-Depends, but normally there should be\nat least one Architecture: any package.\n\nVisibility: info\nShow-Always: no\nCheck: fields/package-relations", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "desktop-effects-tde-trinity", "tag": "debian-watch-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/watch file. This file is used for automatic detection of new\nupstream versions by the Debian External Health Status project and other\nproject infrastructure. If this package is maintained upstream, please\nconsider adding a debian/watch file to detect new releases.\n\nIf the package is not maintained upstream or if upstream uses a\ndistribution mechanism that cannot be meaningfully monitored by uscan and\nthe Debian External Health Status project, please consider adding a\ndebian/watch file containing only comments documenting the situation.\n\nPlease refer to Debian Policy Manual section 4.11 and the uscan(1) manual\npage for details.\n\nVisibility: info\nShow-Always: no\nCheck: debian/watch", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "desktop-effects-tde-trinity", "tag": "no-dh-sequencer", "explanation": "This package does not use the dh sequencer in debian/rules.\n\nWhile maintainers may use a variety of build systems, this one is by far\nthe most popular.\n\nMaintainers are strongly encouraged to use the dh sequencer in new\npackages and convert existing ones when appropriate.\n\nVisibility: info\nShow-Always: no\nCheck: debian/rules/dh-sequencer", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "desktop-effects-tde-trinity", "tag": "out-of-date-standards-version", "explanation": "The source package refers to a Standards-Version older than the one that\nwas current at the time the package was created (according to the\ntimestamp of the latest debian/changelog entry). Please consider updating\nthe package to current Policy and setting this control field\nappropriately.\n\nIf the package is already compliant with the current standards, you don't\nhave to re-upload the package just to adjust the Standards-Version control\nfield. However, please remember to update this field next time you upload\nthe package.\n\nSee /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the\ndebian-policy package for a summary of changes in newer versions of\nPolicy.\n\nPlease refer to\nhttps://www.debian.org/doc/debian-policy/upgrading-checklist.html for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: fields/standards-version", "comment": "", "note": "3.8.4 (released 2010-01-27) (current is 4.6.0.1)", "pointer": ""}, {"severity": "pedantic", "package": "desktop-effects-tde-trinity", "tag": "no-dep5-copyright", "explanation": "This package does not use a machine-readable debian/copyright file.\n\nThis format makes it easier to review licenses and can be easily parsed by\nLintian.\n\nPlease refer to\nhttps://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/copyright/dep5", "comment": "", "note": "", "pointer": "debian/copyright"}, {"severity": "pedantic", "package": "desktop-effects-tde-trinity", "tag": "no-homepage-field", "explanation": "This non-native package lacks a Homepage field. If the package has an\nupstream home page that contains useful information or resources for the\nend user, consider adding a Homepage control field to debian/control.\n\nPlease refer to Debian Policy Manual section 5.6.23 for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: fields/homepage", "comment": "", "note": "", "pointer": ""}, {"severity": "pedantic", "package": "desktop-effects-tde-trinity", "tag": "package-uses-old-debhelper-compat-version", "explanation": "This package uses a debhelper compatibility level that is no longer\nrecommended. Please consider using the recommended level.\n\nFor most packages, the best way to set the compatibility level is to\nspecify debhelper-compat (= X) as a Build-Depends in debian/control. You\ncan also use the debian/compat file or export DH_COMPAT in debian/rules.\n\nIf no level is selected debhelper defaults to level 1, which is\ndeprecated.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "10", "pointer": ""}, {"severity": "pedantic", "package": "desktop-effects-tde-trinity", "tag": "silent-on-rules-requiring-root", "explanation": "The field Rules-Requires-Root is missing from the file debian/control.\n\nOver time, Debian has sucessively narrowed the steps for which elevated\nprivileges are required. It speeds up the building of installation\npackages in the archive. Eventually, Debian will switch the default\narchive-wide behaviour to expedite the build process further.\n\nPlease declare explicitly that the sources do not require root privileges.\nYou can use the setting Rules-Requires-Root: no in the source stanza of\ndebian/control, but please verify with diffoscope(1) that the installation\npackages produced are in fact identical.\n\nPlease refer to /usr/share/doc/dpkg/rootless-builds.txt.gz, Debian Policy\nManual section 4.9.2, and Debian Policy Manual section 5.6.31 for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/control/field/rules-requires-root\nRenamed from: rules-requires-root-missing", "comment": "", "note": "", "pointer": "debian/control"}, {"severity": "pedantic", "package": "desktop-effects-tde-trinity", "tag": "very-long-line-length-in-source-file", "explanation": "The source file includes a line length that is well beyond the normally\nhuman made code line length.\n\nThis very long line length does not allow Lintian to do correctly some\nsource file checks.\n\nThis line could also be the result of some text injected by a computer\nprogram, and thus could lead to FTBFS bugs.\n\nLast but not least, long line in source code could be used to obfuscate\nthe source code and to hide stuff like backdoors or security problems.\n\nIt could be due to jslint source comments or other build tool comments.\n\nYou may report this issue upstream.\n\nVisibility: pedantic\nShow-Always: no\nCheck: cruft\nRenamed from: insane-line-length-in-source-file", "comment": "", "note": "data/DesktopEffectsDialog.ui line 422 is 41160 characters long (>512)", "pointer": ""}, {"severity": "experimental", "package": "desktop-effects-tde-trinity", "tag": "upstream-metadata-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/upstream/metadata file.\n\nThe Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to\ncollect meta-information about upstream projects from any source package.\nThis file is in YAML format and it is used in to feed the data in the\nUltimateDebianDatabase. For example, it can contains the way the authors\nwant their software be cited in publications and some bibliographic\nreferences about the software.\n\nPlease add a debian/upstream/metadata file.\n\nPlease refer to https://dep-team.pages.debian.net/deps/dep12/ and\nhttps://wiki.debian.org/UpstreamMetadata for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/upstream/metadata\nThis tag is experimental.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "debhelper-compat-level", "explanation": "This is the debhelper compat level used specified by this package.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "10", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "debian-build-system", "explanation": "This is the build system that Lintian believes the package is using.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "cdbs-with-debhelper.mk, debhelper", "pointer": "debian/rules"}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "mail-contact", "explanation": "This person is a contact in the named group for this package.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nRenamed from: maintainer uploader\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Maintainer \"TDE Debian Team\" <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "number-of-patches", "explanation": "The number of patches according to the debian/patches/series file.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches/count\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "0", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "package-is-maintained-by-individual", "explanation": "The package is maintained by an individual according to the\nmaintainer/uploaders fields in the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/vcs\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "patch-system", "explanation": "This package uses the specified patch system (eg. \"quilt\" or \"dpatch\").\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "quilt", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "source-format", "explanation": "This is the source format declared in the package.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/source-dir\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "standards-version", "explanation": "The standards version of the package according to Standards-Version field\nin the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/standards-version\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.8.4", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "The raw but trimmed contents of the named field in the given Deb822 file.\nThe number indicates the section from the top, starting at 1.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/deb822\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "debian/control \u00a71 Build-Depends-Indep tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, tdelibs-trinity-dev,\\n dh-python, python3-all-dev, pytde-dev", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 Priority optional", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 Section tde", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 Source desktop-effects-tde-trinity", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 Standards-Version 3.8.4", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a71 X-Python3-Version all", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Architecture all", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Breaks desktop-effects-kde-kde3 (<< 4:14.0.0~), desktop-effects-kde-trinity (<< 4:14.0.0~)", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Depends ${python3:Depends}, python3-apt, python3-pytqt, python3-pytde", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Description compiz setup tool for Trinity\\n A simple Compiz configuration tool for Trinity. Installs and sets Compiz\\n as the window manager.", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Package desktop-effects-tde-trinity", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "debian/control \u00a72 Replaces desktop-effects-kde-kde3 (<< 4:14.0.0~), desktop-effects-kde-trinity (<< 4:14.0.0~)", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "These are the raw but trimmed contents of the named field in the package's\nprimary control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/trimmed\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Architecture all", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Binary desktop-effects-tde-trinity", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Depends-Indep tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build, tdelibs-trinity-dev, dh-python, python3-all-dev, pytde-dev", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha1 dfec1fcb59cf07705861152c54b8ab44923a9635 77124 desktop-effects-tde-trinity_14.2.0~pre35.orig.tar.xz\\n b9144d491b9cbd071edcea3a52e76083b428f177 2288 desktop-effects-tde-trinity_14.2.0~pre35-0ubuntu22.04.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha256 eed56e0a3b5875f1c3f9fb93df878f179e99f30c6f9a603214fb91fac68c7151 77124 desktop-effects-tde-trinity_14.2.0~pre35.orig.tar.xz\\n 572bed51d45ce9fb61a26977a12697f0600fcfce6e19910977060553856373fd 2288 desktop-effects-tde-trinity_14.2.0~pre35-0ubuntu22.04.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Files a6c5813d649fa5394f2b22395f220fac 77124 desktop-effects-tde-trinity_14.2.0~pre35.orig.tar.xz\\n cc31c7be394fdcfa10eb396c06a2cb2e 2288 desktop-effects-tde-trinity_14.2.0~pre35-0ubuntu22.04.0+7.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Format 3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Package-List desktop-effects-tde-trinity deb tde optional arch=all", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Source desktop-effects-tde-trinity", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Standards-Version 3.8.4", "pointer": ""}, {"severity": "classification", "package": "desktop-effects-tde-trinity", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Version 4:14.2.0~pre35-0ubuntu22.04.0+7", "pointer": ""}], "summary": {"tags_count_by_severity": {"error": 3, "warning": 5, "info": 4, "pedantic": 5, "experimental": 1, "overridden": 0, "classification": 33}, "package_filename": {"desktop-effects-tde-trinity": "desktop-effects-tde-trinity_14.2.0~pre35-0ubuntu22.04.0+7.dsc"}, "tags_found": ["binary-nmu-debian-revision-in-source", "build-depends-on-python-dev-with-no-arch-any", "custom-compression-in-debian-source-options", "debhelper-but-no-misc-depends", "debhelper-compat-level", "debian-build-system", "debian-watch-file-is-missing", "epoch-change-without-comment", "epoch-changed-but-upstream-version-did-not-go-backwards", "mail-contact", "missing-build-depends-for-clean-target-in-debian-rules", "no-dep5-copyright", "no-dh-sequencer", "no-homepage-field", "number-of-patches", "out-of-date-standards-version", "package-is-maintained-by-individual", "package-uses-old-debhelper-compat-version", "patch-system", "rules-require-build-prerequisite", "silent-on-rules-requiring-root", "source-format", "standards-version", "trimmed-deb822-field", "trimmed-field", "upstream-metadata-file-is-missing", "very-long-line-length-in-source-file"], "overridden_tags_found": [], "lintian_version": "2.114.0ubuntu1", "distribution": "debian:jammy"}, "version": 1}