1{"tags": [{"severity": "warning", "package": "libart-lgpl", "tag": "odd-historical-debian-changelog-version", "explanation": "The version string in a historical changelog entry was not parsed\ncorrectly. Usually, that means it does not conform to policy.\n\nIt can also happen when a package changes from native to non-native (or\nthe other way around). Historical entries are then in a nonconforming\nformat.\n\nAs a side note, Lintian cannot tell whether a package changed from naive\nto non-native, or the other way around. It can only say whether the\nhistorical changelog entries comply with the current nativeness of a\npackage.\n\nPlease refer to Version (Section 5.6.12) in the Debian Policy Manual for\ndetails.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/changelog", "comment": "", "note": "4:14.1.6~pre1 (for non-native)", "pointer": "debian/changelog:8"}, {"severity": "info", "package": "libart-lgpl", "tag": "adopted-extended-field", "explanation": "A field in debian/control has an extension prefix but is also known\nwithout it.\n\nExtension prefixes like XS-* or XC-* allow experimental fields to\npropagate to the right place when packages are built with dpkg. In this\ncase, however, the field is also known without the prefix. In all\nlikelihood the field was permanently adopted, and dpkg learned how to deal\nwith it.\n\nPlease consider removing the extension prefix for the field name.\n\nVisibility: info\nShow-Always: no\nCheck: debian/control/field/adopted\nRenamed from: xc-package-type-in-debian-control\nxs-testsuite-field-in-debian-control xs-vcs-field-in-debian-control", "comment": "", "note": "(in section for source) XSBC-Original-Maintainer", "pointer": "debian/control:5"}, {"severity": "info", "package": "libart-lgpl", "tag": "debian-watch-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/watch file. This file is used for automatic detection of new\nupstream versions by the Debian External Health Status project and other\nproject infrastructure. If this package is maintained upstream, please\nconsider adding a debian/watch file to detect new releases.\n\nIf the package is not maintained upstream or if upstream uses a\ndistribution mechanism that cannot be meaningfully monitored by uscan and\nthe Debian External Health Status project, please consider adding a\ndebian/watch file containing only comments documenting the situation.\n\nPlease refer to Upstream source location: debian/watch (Section 4.11) in\nthe Debian Policy Manual and the uscan(1) manual page for details.\n\nVisibility: info\nShow-Always: no\nCheck: debian/watch", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "libart-lgpl", "tag": "duplicate-long-description", "explanation": "The listed binary packages all share the same extended description.\n\nPlease add some additional, useful information to the extended\ndescriptions that explain what is in each package and how it differs from\nthe next.\n\nIt is not okay to rely only on package naming conventions to indicate what\nis inside.\n\nVisibility: info\nShow-Always: no\nCheck: debian/control/field/description/duplicate", "comment": "", "note": "libart-2.0-2 libart-2.0-dev", "pointer": "debian/control"}, {"severity": "info", "package": "libart-lgpl", "tag": "no-dh-sequencer", "explanation": "This package does not use the dh sequencer in debian/rules.\n\nWhile maintainers may use a variety of build systems, this one is by far\nthe most popular.\n\nMaintainers are strongly encouraged to use the dh sequencer in new\npackages and convert existing ones when appropriate.\n\nVisibility: info\nShow-Always: no\nCheck: debian/rules/dh-sequencer", "comment": "", "note": "", "pointer": "debian/rules"}, {"severity": "info", "package": "libart-lgpl", "tag": "out-of-date-standards-version", "explanation": "The source package refers to a Standards-Version older than the one that\nwas current at the time the package was created (according to the\ntimestamp of the latest debian/changelog entry). Please consider updating\nthe package to current Policy and setting this control field\nappropriately.\n\nIf the package is already compliant with the current standards, you don't\nhave to re-upload the package just to adjust the Standards-Version control\nfield. However, please remember to update this field next time you upload\nthe package.\n\nSee /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the\ndebian-policy package for a summary of changes in newer versions of\nPolicy.\n\nPlease refer to\nhttps://www.debian.org/doc/debian-policy/upgrading-checklist.html for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: fields/standards-version", "comment": "", "note": "3.8.4 (released 2010-01-27) (current is 4.7.2)", "pointer": ""}, {"severity": "pedantic", "package": "libart-lgpl", "tag": "no-dep5-copyright", "explanation": "This package does not use a machine-readable debian/copyright file.\n\nThis format makes it easier to review licenses and can be easily parsed by\nLintian.\n\nPlease refer to\nhttps://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/copyright/dep5", "comment": "", "note": "", "pointer": "debian/copyright"}, {"severity": "pedantic", "package": "libart-lgpl", "tag": "no-homepage-field", "explanation": "This non-native package lacks a Homepage field. If the package has an\nupstream home page that contains useful information or resources for the\nend user, consider adding a Homepage control field to debian/control.\n\nPlease refer to Homepage (Section 5.6.23) in the Debian Policy Manual for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: fields/homepage", "comment": "", "note": "", "pointer": ""}, {"severity": "pedantic", "package": "libart-lgpl", "tag": "package-uses-old-debhelper-compat-version", "explanation": "This package uses a debhelper compatibility level that is no longer\nrecommended. Please consider using the recommended level.\n\nFor most packages, the best way to set the compatibility level is to\nspecify debhelper-compat (= X) as a Build-Depends in debian/control. You\ncan also use the debian/compat file or export DH_COMPAT in debian/rules.\n\nIf no level is selected debhelper defaults to level 1, which is\ndeprecated.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "10", "pointer": ""}, {"severity": "experimental", "package": "libart-lgpl", "tag": "upstream-metadata-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/upstream/metadata file.\n\nThe Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to\ncollect meta-information about upstream projects from any source package.\nThis file is in YAML format and it is used in to feed the data in the\nUltimateDebianDatabase. For example, it can contains the way the authors\nwant their software be cited in publications and some bibliographic\nreferences about the software.\n\nPlease add a debian/upstream/metadata file.\n\nPlease refer to https://dep-team.pages.debian.net/deps/dep12/ and\nhttps://wiki.debian.org/UpstreamMetadata for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/upstream/metadata\nThis tag is experimental.", "comment": "", "note": "", "pointer": ""}, {"severity": "overridden", "package": "libart-lgpl", "tag": "binary-nmu-debian-revision-in-source", "explanation": "The version number of your source package ends in +b and a number or has a\nDebian revision containing three parts. These version numbers are used by\nbinary NMUs and should not be used as the source version. (The +b form is\nthe current standard; the three-part version number now obsolete.)\n\nPlease refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the\nDebian Developer's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/version", "comment": "", "note": "4:14.2.0~pre7-0ubuntu26.04.0+9~a", "pointer": ""}, {"severity": "overridden", "package": "libart-lgpl", "tag": "custom-compression-in-debian-source-options", "explanation": "This package selects a custom compression level or algorithm in\ndebian/source/options. Please remove the call and let dpkg-deb(1) select\nsuitable defaults.\n\nCustom compression settings are usually chosen for one of two reasons:\n\nHigher compression levels or more advanced algorithms shrink the sizes of\nlarge files, but they can cause problems in the resource constrained\nenvironments used in Debian's buildd infrastructure. For example, higher\nthan expected memory consumption may trigger an FTBFS or a failure to\ninstall.\n\nLower compression levels or less advanced algorithms are sometimes needed\nto support older Debian version. Unfortunately, they also make it harder\nto change the defaults on an archive-wide basis.\n\nSome legitimate use cases trigger this tag. Please override it.\n\nPlease refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)\nmanual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/source-dir\nRenamed from: debian-source-options-has-custom-compression-settings", "comment": "We want XZ regardless of the default compression.", "note": "compression = \"xz\"", "pointer": "debian/source/options:2"}, {"severity": "overridden", "package": "libart-lgpl", "tag": "custom-compression-in-debian-source-options", "explanation": "", "comment": "We want XZ regardless of the default compression.", "note": "compression-level = 9", "pointer": "debian/source/options:3"}, {"severity": "classification", "package": "libart-lgpl", "tag": "debhelper-compat-level", "explanation": "This is the debhelper compat level used specified by this package.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "10", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "debian-build-system", "explanation": "This is the build system that Lintian believes the package is using.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "cdbs-with-debhelper.mk", "pointer": "debian/rules"}, {"severity": "classification", "package": "libart-lgpl", "tag": "mail-contact", "explanation": "This person is a contact in the named group for this package.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nRenamed from: maintainer uploader\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Maintainer \"TDE Debian Team\" <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "number-of-patches", "explanation": "The number of patches according to the debian/patches/series file.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches/count\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "0", "pointer": "debian/patches/series"}, {"severity": "classification", "package": "libart-lgpl", "tag": "package-is-maintained-by-individual", "explanation": "The package is maintained by an individual according to the\nmaintainer/uploaders fields in the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/vcs\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "patch-system", "explanation": "This package uses the specified patch system (eg. \"quilt\" or \"dpatch\").\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "quilt", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "rules-do-not-require-root", "explanation": "The sources can build the installation packages without using fakeroot(1)\nor similar.\n\nPlease refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules\nand Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and\nRules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for\ndetails.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/control/field/rules-requires-root\nRenamed from: rules-does-not-require-root\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": "debian/control"}, {"severity": "classification", "package": "libart-lgpl", "tag": "source-format", "explanation": "This is the source format declared in the package.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/source-dir\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "standards-version", "explanation": "The standards version of the package according to Standards-Version field\nin the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/standards-version\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.8.4", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "The raw but trimmed contents of the named field in the given Deb822 file.\nThe number indicates the section from the top, starting at 1.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/deb822\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "\u00a71 Build-Depends cdbs, tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build", "pointer": "debian/control:7"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": "debian/control:4"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Priority optional", "pointer": "debian/control:3"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Section devel", "pointer": "debian/control:2"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Source libart-lgpl", "pointer": "debian/control:1"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Standards-Version 3.8.4", "pointer": "debian/control:6"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 XSBC-Original-Maintainer Josselin Mouette <joss@debian.org>", "pointer": "debian/control:5"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Architecture any", "pointer": "debian/control:10"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Breaks libart-2.0-2 (<< 4:14.0.0~)", "pointer": "debian/control:14"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Depends ${misc:Depends},\\n ${shlibs:Depends}", "pointer": "debian/control:16"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Description Library of functions for 2D graphics - runtime files\\n A library of functions for 2D graphics supporting a superset of the\\n PostScript imaging model, designed to be integrated with graphics, artwork,\\n and illustration programs. It is written in optimized C, and is fully\\n compatible with C++. With a small footprint of 10,000 lines of code, it is\\n especially suitable for embedded applications.", "pointer": "debian/control:18"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Multi-Arch same", "pointer": "debian/control:11"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Package libart-2.0-2", "pointer": "debian/control:9"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Pre-Depends ${misc:Pre-Depends}", "pointer": "debian/control:15"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Replaces libart-2.0-2 (<< 4:14.0.0~)", "pointer": "debian/control:13"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Section libs", "pointer": "debian/control:12"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Architecture any", "pointer": "debian/control:26"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Breaks libart-2.0-dev (<< 4:14.0.0~)", "pointer": "debian/control:29"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Depends ${misc:Depends},\\n ${shlibs:Depends},\\n libart-2.0-2 (= ${binary:Version}),\\n pkgconf", "pointer": "debian/control:30"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Description Library of functions for 2D graphics - development files\\n A library of functions for 2D graphics supporting a superset of the\\n PostScript imaging model, designed to be integrated with graphics, artwork,\\n and illustration programs. It is written in optimized C, and is fully\\n compatible with C++. With a small footprint of 10,000 lines of code, it is\\n especially suitable for embedded applications.", "pointer": "debian/control:34"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Package libart-2.0-dev", "pointer": "debian/control:25"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Replaces libart-2.0-dev (<< 4:14.0.0~)", "pointer": "debian/control:28"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Section libdevel", "pointer": "debian/control:27"}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "These are the raw but trimmed contents of the named field in the package's\nprimary control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/trimmed\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Architecture any", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Binary libart-2.0-2, libart-2.0-dev", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Depends cdbs, tde-cdbs, debhelper (>= 10~), quilt, tde-cmake, ninja-build", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha1 511ffca2a8875c8411c7be68266175e12ad51dac 94184 libart-lgpl_14.2.0~pre7.orig.tar.xz\\n af48572c1cf0a5ff05df3c8f525b16598da23efa 4544 libart-lgpl_14.2.0~pre7-0ubuntu26.04.0+9~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha256 ae35bf74e3a8a6701d678070d3027492513e3d408780a356a8b995428efce8d1 94184 libart-lgpl_14.2.0~pre7.orig.tar.xz\\n e780c92284c9e227c40b1c5f3e6da1793d7cfb29336361b83ac0fd076a0ff742 4544 libart-lgpl_14.2.0~pre7-0ubuntu26.04.0+9~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Files 0196009183522d3abcc169bf8cf3dc2a 94184 libart-lgpl_14.2.0~pre7.orig.tar.xz\\n 539cc4f3dc6190252ec42c301a1ddf4d 4544 libart-lgpl_14.2.0~pre7-0ubuntu26.04.0+9~a.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Format 3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Original-Maintainer Josselin Mouette <joss@debian.org>", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Package-List libart-2.0-2 deb libs optional arch=any\\n libart-2.0-dev deb libdevel optional arch=any", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Source libart-lgpl", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Standards-Version 3.8.4", "pointer": ""}, {"severity": "classification", "package": "libart-lgpl", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Version 4:14.2.0~pre7-0ubuntu26.04.0+9~a", "pointer": ""}], "summary": {"tags_count_by_severity": {"error": 0, "warning": 1, "info": 5, "pedantic": 3, "experimental": 1, "overridden": 3, "classification": 45}, "package_filename": {"libart-lgpl": "libart-lgpl_14.2.0~pre7-0ubuntu26.04.0+9~a.dsc"}, "tags_found": ["adopted-extended-field", "debhelper-compat-level", "debian-build-system", "debian-watch-file-is-missing", "duplicate-long-description", "mail-contact", "no-dep5-copyright", "no-dh-sequencer", "no-homepage-field", "number-of-patches", "odd-historical-debian-changelog-version", "out-of-date-standards-version", "package-is-maintained-by-individual", "package-uses-old-debhelper-compat-version", "patch-system", "rules-do-not-require-root", "source-format", "standards-version", "trimmed-deb822-field", "trimmed-field", "upstream-metadata-file-is-missing"], "overridden_tags_found": ["binary-nmu-debian-revision-in-source", "custom-compression-in-debian-source-options"], "lintian_version": "2.127.0ubuntu1", "distribution": "debian:resolute"}, "version": 1}