cmd-output.log

cmd: lintian --no-cfg --display-level '>=classification' --display-experimental --info --show-overrides '/tmp/debusine-fetch-exec-upload-lcucvlji/pytde_14.1.6~pre5-0ubuntu25.10.0+5.dsc' '/tmp/debusine-fetch-exec-upload-lcucvlji/pytde-dev_14.1.6~pre5-0ubuntu25.10.0+5_all.deb' '/tmp/debusine-fetch-exec-upload-lcucvlji/pytde-doc_14.1.6~pre5-0ubuntu25.10.0+5_all.deb' '/tmp/debusine-fetch-exec-upload-lcucvlji/python3-pytde-dbg_14.1.6~pre5-0ubuntu25.10.0+5_ppc64el.deb' '/tmp/debusine-fetch-exec-upload-lcucvlji/python3-pytde_14.1.6~pre5-0ubuntu25.10.0+5_ppc64el.deb'
output (contains stderr only, stdout was captured):

Files in working directory:
lintian.txt
--------------------
N:
I: pytde source: adopted-extended-field (in section for source) XSBC-Original-Maintainer [debian/control:5]
N: 
N:   A field in debian/control has an extension prefix but is also known
N:   without it.
N:   
N:   Extension prefixes like XS-* or XC-* allow experimental fields to
N:   propagate to the right place when packages are built with dpkg. In this
N:   case, however, the field is also known without the prefix. In all
N:   likelihood the field was permanently adopted, and dpkg learned how to deal
N:   with it.
N:   
N:   Please consider removing the extension prefix for the field name.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/adopted
N:   Renamed from: xc-package-type-in-debian-control
N:   xs-testsuite-field-in-debian-control xs-vcs-field-in-debian-control
N: 
N:
I: pytde source: debian-watch-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/watch file. This file is used for automatic detection of new
N:   upstream versions by the Debian External Health Status project and other
N:   project infrastructure. If this package is maintained upstream, please
N:   consider adding a debian/watch file to detect new releases.
N:   
N:   If the package is not maintained upstream or if upstream uses a
N:   distribution mechanism that cannot be meaningfully monitored by uscan and
N:   the Debian External Health Status project, please consider adding a
N:   debian/watch file containing only comments documenting the situation.
N: 
N:   Please refer to Upstream source location: debian/watch (Section 4.11) in
N:   the Debian Policy Manual and the uscan(1) manual page for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/watch
N: 
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/dcop.cpython-313-powerpc64le-linux-gnu.so]
N: 
N:   This package provides an ELF binary that lacks the "bindnow" linker flag.
N:   
N:   This is needed (together with "relro") to make the "Global Offset Table"
N:   (GOT) fully read-only. The bindnow feature trades startup time for
N:   improved security. Please consider enabling this feature or consider
N:   overriding the tag (possibly with a comment about why).
N:   
N:   If you use dpkg-buildflags, you may have to add hardening=+bindnow or
N:   hardening=+all to DEB_BUILD_MAINT_OPTIONS.
N:   
N:   The relevant compiler flags are set in LDFLAGS.
N: 
N:   Please refer to https://wiki.debian.org/Hardening for details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: binaries/hardening
N: 
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeabc.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdecore.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdefile.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdefx.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdehtml.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeio.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdemdi.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeparts.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeprint.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tderesources.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdespell.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeui.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeutils.cpython-313-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/dcop.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeabc.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdecore.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdefile.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdefx.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdehtml.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeio.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdemdi.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeparts.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeprint.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tderesources.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdespell.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeui.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: python3-pytde-dbg: hardening-no-bindnow [usr/lib/python3/dist-packages/tdeutils.cpython-313d-powerpc64le-linux-gnu.so]
N:
I: pytde source: installable-field-mirrors-source (in section for pytde-dev) Section [debian/control:33]
N: 
N:   The named field for an installation package in debian/control has the same
N:   value as the one inherited from the source paragraph.
N:   
N:   In the interest of shorter and clearer files, you may wish to take
N:   advantage of the inheritance rules. This field is redundant.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/control/field/redundant
N:   Renamed from: binary-control-field-duplicates-source
N: 
N:
I: pytde source: installable-field-mirrors-source (in section for python3-pytde-dbg) Priority [debian/control:22]
N:
I: pytde source: no-dh-sequencer [debian/rules]
N: 
N:   This package does not use the dh sequencer in debian/rules.
N:   
N:   While maintainers may use a variety of build systems, this one is by far
N:   the most popular.
N:   
N:   Maintainers are strongly encouraged to use the dh sequencer in new
N:   packages and convert existing ones when appropriate.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: debian/rules/dh-sequencer
N: 
N:
I: pytde source: out-of-date-standards-version 3.8.4 (released 2010-01-27) (current is 4.7.2)
N: 
N:   The source package refers to a Standards-Version older than the one that
N:   was current at the time the package was created (according to the
N:   timestamp of the latest debian/changelog entry). Please consider updating
N:   the package to current Policy and setting this control field
N:   appropriately.
N:   
N:   If the package is already compliant with the current standards, you don't
N:   have to re-upload the package just to adjust the Standards-Version control
N:   field. However, please remember to update this field next time you upload
N:   the package.
N:   
N:   See /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the
N:   debian-policy package for a summary of changes in newer versions of
N:   Policy.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/debian-policy/upgrading-checklist.html for
N:   details.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/standards-version
N: 
N:
I: pytde-dev: package-contains-documentation-outside-usr-share-doc [usr/share/sip-tqt/trinity/glossary.html]
N: 
N:   This package ships a documentation file outside /usr/share/doc
N:   Documentation files are normally installed inside /usr/share/doc.
N:   
N:   If this file doesn't describe the contents or purpose of the directory it
N:   is in, please consider moving this file to /usr/share/doc/ or maybe even
N:   removing it. If this file does describe the contents or purpose of the
N:   directory it is in, please add a lintian override.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: documentation
N: 
N:   Screen: python/egg/metadata
N:     Advocates: "Scott Kitterman" <debian@kitterman.com>
N:     Reason: The folders XXX.dist-info/ and XXX.egg-info/ hold metadata for
N:             Python modules. Those files are not documentation even though
N:             some of their names carry the .txt file extension.
N:             
N:             Python modules can be both public and private.
N:             
N:             Read more in
N:             https://www.python.org/dev/peps/pep-0427/#the-dist-info-directory,
N:             https://www.python.org/dev/peps/pep-0376/#id16,
N:             https://www.python.org/dev/peps/pep-0610/,
N:             https://www.python.org/dev/peps/pep-0639/,
N:             https://setuptools.pypa.io/en/latest/deprecated/python_eggs.html,
N:             and Bug#1003913.
N: 
N:
I: pytde source: unused-override unknown-field Original-Maintainer [debian/source/lintian-overrides:12]
N: 
N:   Your package specifies the named override but there were no tags that
N:   could have been silenced by it.
N:   
N:   Maybe you fixed an underlying condition but forgot to remove the override.
N:   It is also possible that the Lintian maintainers fixed a false positive.
N:   
N:   If the override is now unused, please remove it.
N:   
N:   This tag is similar to mismatched-override except there a tag could have
N:   been silenced if the context had matched.
N:   
N:   Sometimes, overrides end up not being used because a tag appears only on
N:   some architectures. In that case, overrides can be equipped with an
N:   architecture qualifier.
N: 
N:   Please refer to Architecture specific overrides (Section 2.4.3) in the
N:   Lintian User's Manual for details.
N: 
N:   Visibility: info
N:   Show-Always: yes
N:   Check: lintian
N: 
N:
I: pytde-dev: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/pytde-dev:5]
N:
I: pytde-doc: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/pytde-doc:2]
N:
I: python3-pytde: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/python3-pytde:5]
N:
I: python3-pytde-dbg: unused-override unknown-field Original-Maintainer [usr/share/lintian/overrides/python3-pytde-dbg:2]
N:
I: python3-pytde-dbg: wrong-section-according-to-package-name python => debug
N: 
N:   This package has a name suggesting that it belongs to a section other than
N:   the one it is currently categorized in.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: fields/section
N: 
N:
P: pytde source: co-maintained-package-with-no-vcs-fields
N: 
N:   Based on the content of the maintainer and uploader fields this package is
N:   co-maintained but there are no Vcs-* fields.
N:   
N:   It is recommended that shared maintenance of packages are co-ordinated via
N:   a revision control system.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: fields/vcs
N:   Renamed from: co-maintained-package-with-no-vcs-headers
N: 
N:
P: pytde-dev: copyright-refers-to-symlink-license usr/share/common-licenses/GPL
N: 
N:   The copyright file refers to the versionless symlink in
N:   /usr/share/common-licenses for the full text of the GPL, LGPL, or GFDL
N:   license. This symlink is updated to point to the latest version of the
N:   license when a new one is released. The package appears to allow
N:   relicensing under later versions of its license, so this is legally
N:   consistent, but it implies that Debian will relicense the package under
N:   later versions of those licenses as they're released. It is normally
N:   better to point to the version of the license the package references in
N:   its license statement.
N:   
N:   For example, if the package says something like "you may redistribute it
N:   and/or modify it under the terms of the GNU General Public License as
N:   published by the Free Software Foundation; either version 2, or (at your
N:   option) any later version", the debian/copyright file should refer to
N:   /usr/share/common-licenses/GPL-2, not /GPL.
N:   
N:   For packages released under the same terms as Perl, Perl references the
N:   GPL version 1, so point to /usr/share/common-licenses/GPL-1.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/copyright
N: 
N:
P: pytde-doc: copyright-refers-to-symlink-license usr/share/common-licenses/GPL
N:
P: python3-pytde: copyright-refers-to-symlink-license usr/share/common-licenses/GPL
N:
P: python3-pytde-dbg: copyright-refers-to-symlink-license usr/share/common-licenses/GPL
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/example_dcopexport.py]
N: 
N:   This package contains an example script for an interpreter that is not
N:   shipped in the package and is not known to Lintian. It is possible that
N:   there is a typo or the interpreter is not executable.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: scripts
N: 
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/pytde-sampler/__init__.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/pytde-sampler/about.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/pytde-sampler/lib.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/pytde-sampler/runner.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/pytde-sampler/sampler.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/uiqxembed.py]
N:
P: pytde-doc: example-unusual-interpreter python [usr/share/doc/pytde-doc/examples/uitdemdi.py]
N:
P: pytde source: no-dep5-copyright [debian/copyright]
N: 
N:   This package does not use a machine-readable debian/copyright file.
N:   
N:   This format makes it easier to review licenses and can be easily parsed by
N:   Lintian.
N: 
N:   Please refer to
N:   https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for
N:   details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/copyright/dep5
N: 
N:
P: pytde source: package-uses-old-debhelper-compat-version 10
N: 
N:   This package uses a debhelper compatibility level that is no longer
N:   recommended. Please consider using the recommended level.
N:   
N:   For most packages, the best way to set the compatibility level is to
N:   specify debhelper-compat (= X) as a Build-Depends in debian/control. You
N:   can also use the debian/compat file or export DH_COMPAT in debian/rules.
N:   
N:   If no level is selected debhelper defaults to level 1, which is
N:   deprecated.
N: 
N:   Please refer to the debhelper(7) manual page for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debhelper
N: 
N:
P: pytde source: trailing-whitespace [debian/changelog:147]
N: 
N:   This file contains lines with trailing whitespace characters.
N:   
N:   Whilst often harmless and unsightly, such extra whitespaces can also cause
N:   tools to interpret the whitespace characters literally. The tool diff(1)
N:   does not like them, either. They are best avoided.
N:   
N:   Some of these problems can be hard to track down.
N:   
N:   Whitespace at the end of lines may be removed with the following:
N:   
N:    $ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog
N:   
N:   If you use Emacs, you can also use "M-x wh-cl" (whitespace-cleanup).
N:   
N:   However, if you wish to only remove trailing spaces and leave trailing
N:   tabs (eg. for Makefiles), you can use the following code snippet:
N:   
N:    $ sed -i -e 's@[ ]*$@@g' debian/rules
N:   
N:   To remove empty lines from the end of a file, you can use:
N:   
N:    $ sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' debian/rules
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/trailing-whitespace
N:   Renamed from: file-contains-trailing-whitespace
N: 
N:
P: pytde source: trailing-whitespace [debian/changelog:334]
N:
P: pytde source: trailing-whitespace [debian/changelog:91]
N:
P: pytde source: trailing-whitespace [debian/changelog:93]
N:
P: pytde source: trailing-whitespace [debian/control:41]
N:
X: pytde-dev: application-in-library-section python [usr/bin/tdepyuic]
N: 
N:   This package contains a binary in $PATH but is in a section just thought
N:   for libraries. It likely should be in another section like e.g. utils,
N:   text, devel, misc, etc., but not in e.g. perl, ruby or python.
N:   
N:   People tend to skip these package sections when looking for applications
N:   in the package list and hence wouldn't notice this package.
N:   
N:   In case the program in $PATH is only a helper tool and the package is
N:   primarily a library, please add a Lintian override for this tag.
N: 
N:   Visibility: info
N:   Show-Always: no
N:   Check: application-not-library
N:   This tag is experimental.
N: 
N:
X: pytde-doc: duplicate-files usr/share/doc/pytde-doc/examples/pytde-sampler/aboutkde.png usr/share/doc/pytde-doc/examples/pytestimage.png
N: 
N:   The package ships the two (or more) files with the exact same contents.
N:   
N:   Duplicates can often be replaced with symlinks by running:
N:   
N:      jdupes -rl debian/${binary}/usr
N:   
N:   ... after they are installed, eg. in override_dh_link. In addition, please
N:   consider reporting this upstream.
N:   
N:   Note: empty files are exempt from this check.
N: 
N:   Please refer to the jdupes(1) manual page for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: files/duplicates
N:   This tag is experimental.
N: 
N:
X: pytde source: source-is-missing [doc/classref/tdeabc/TDEABC.html]
N: 
N:   The source of the following file is missing. Lintian checked a few
N:   possible paths to find the source, and did not find it.
N:   
N:   Please repack your package to include the source or add it to
N:   "debian/missing-sources" directory.
N:   
N:   Please note, that very-long-line-length-in-source-file tagged files are
N:   likely tagged source-is-missing. It is a feature not a bug.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: files/source-missing
N:   This tag is experimental.
N: 
N:
X: pytde source: source-is-missing [doc/classref/tdehtml/DOM.html]
N:
X: pytde source: source-is-missing [doc/classref/tdeio/TDEIO.html]
N:
X: pytde source: source-is-missing [doc/classref/tdeparts/KParts.html]
N:
X: pytde source: source-is-missing [doc/classref/tdeui/KStdAction.html]
N:
X: python3-pytde: spelling-error-in-binary Cummulative Cumulative [usr/lib/python3/dist-packages/tdeio.cpython-313-powerpc64le-linux-gnu.so]
N: 
N:   Lintian found a spelling error in the given binary. Lintian has a list of
N:   common misspellings that it looks for. It does not have a dictionary like
N:   a spelling checker does.
N:   
N:   If the string containing the spelling error is translated with the help of
N:   gettext or a similar tool, please fix the error in the translations as
N:   well as the English text to avoid making the translations fuzzy. With
N:   gettext, for example, this means you should also fix the spelling mistake
N:   in the corresponding msgids in the *.po files.
N:   
N:   You can often find the word in the source code by running:
N:   
N:    grep -rw <word> <source-tree>
N:   
N:   This tag may produce false positives for words that contain non-ASCII
N:   characters due to limitations in strings.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: binaries/spelling
N:   This tag is experimental.
N: 
N:
X: python3-pytde-dbg: spelling-error-in-binary Cummulative Cumulative [usr/lib/python3/dist-packages/tdeio.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary Frop Drop [usr/lib/python3/dist-packages/tdefile.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary NaM Name [usr/lib/python3/dist-packages/tdeui.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeabc.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdecore.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdefile.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdehtml.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeio.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdemdi.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeparts.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeprint.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tderesources.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdespell.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeui.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: python3-pytde-dbg: spelling-error-in-binary autor author [usr/lib/python3/dist-packages/tdeutils.cpython-313d-powerpc64le-linux-gnu.so]
N:
X: pytde source: upstream-metadata-file-is-missing
N: 
N:   This source package is not Debian-native but it does not have a
N:   debian/upstream/metadata file.
N:   
N:   The Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to
N:   collect meta-information about upstream projects from any source package.
N:   This file is in YAML format and it is used in to feed the data in the
N:   UltimateDebianDatabase. For example, it can contains the way the authors
N:   want their software be cited in publications and some bibliographic
N:   references about the software.
N:   
N:   Please add a debian/upstream/metadata file.
N: 
N:   Please refer to https://dep-team.pages.debian.net/deps/dep12/ and
N:   https://wiki.debian.org/UpstreamMetadata for details.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: debian/upstream/metadata
N:   This tag is experimental.
N: 
N:
X: pytde source: very-long-line-length-in-source-file 1516 > 512 [doc/classref/tdeparts/KParts.html:38]
N: 
N:   The source file includes a line length that is well beyond the normally
N:   human made code line length.
N:   
N:   This very long line length does not allow Lintian to do correctly some
N:   source file checks.
N:   
N:   This line could also be the result of some text injected by a computer
N:   program, and thus could lead to FTBFS bugs.
N:   
N:   Last but not least, long line in source code could be used to obfuscate
N:   the source code and to hide stuff like backdoors or security problems.
N:   
N:   It could be due to jslint source comments or other build tool comments.
N:   
N:   You may report this issue upstream.
N: 
N:   Visibility: pedantic
N:   Show-Always: no
N:   Check: files/contents/line-length
N:   Renamed from: insane-line-length-in-source-file
N:   This tag is experimental.
N: 
N:   Screen: autotools/long-lines
N:     Advocates: "Russ Allbery" <rra@debian.org>
N:     Reason: 
N:             Upstream sources using autoconf have traditionally been
N:             distributed with generated ./configure scripts as well as
N:             other third-party m4 macro files such as libtool.
N:             
N:             When paired with automake, there may also be some intermediate
N:             Makefile.in files.
N:             
N:             A lot of sources potentially contain such files, but they are
N:             not actionable by either the Debian distributor or by the
N:             upstream maintainer.
N:             
N:             As a side note, modern Debian build protocols will re-create
N:             many of those files via dh_autoreconf. They are present merely
N:             to aid in bootstrapping systems where the GNU suite may not yet
N:             be available.
N:             
N:             Read more in Bug#996740.
N: 
N:
X: pytde source: very-long-line-length-in-source-file 2158 > 512 [doc/classref/tdeio/TDEIO.html:38]
N:
X: pytde source: very-long-line-length-in-source-file 3388 > 512 [doc/classref/tdeabc/TDEABC.html:38]
N:
X: pytde source: very-long-line-length-in-source-file 573 > 512 [doc/classref/tdeui/KStdAction.html:39]
N:
X: pytde source: very-long-line-length-in-source-file 7110 > 512 [doc/classref/tdehtml/DOM.html:38]
N:
X: pytde source: very-long-line-length-in-source-file 755 > 512 [admin/acinclude.m4.in:2931]
N:
C: pytde-dev: control-tarball-compression-format zst
N: 
N:   This is the compressor format used for the control.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-doc: control-tarball-compression-format zst
N:
C: python3-pytde: control-tarball-compression-format zst
N:
C: python3-pytde-dbg: control-tarball-compression-format zst
N:
C: pytde-dev: ctrl-script [postinst]
N: 
N:   This package has one or more maintainer scripts (or other executable
N:   control files).
N:   
N:   This flags any control file with the executable bit set.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: control-files
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-dev: ctrl-script [prerm]
N:
C: python3-pytde: ctrl-script [postinst]
N:
C: python3-pytde: ctrl-script [prerm]
N:
C: pytde-dev: data-tarball-compression-format zst
N: 
N:   This is the compressor format used for the data.tar tarball.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: deb-format
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-doc: data-tarball-compression-format zst
N:
C: python3-pytde: data-tarball-compression-format zst
N:
C: python3-pytde-dbg: data-tarball-compression-format zst
N:
C: pytde-dev: debhelper-autoscript-in-maintainer-scripts dh_python3
N: 
N:   The maintainer scripts of the package contain one or more auto-generated
N:   shell snippets inserted by the listed debhelper tool.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: maintainer-scripts/generated
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: python3-pytde: debhelper-autoscript-in-maintainer-scripts dh_python3
N:
C: pytde source: debhelper-compat-level 10
N: 
N:   This is the debhelper compat level used specified by this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: debian-build-system debhelper [debian/rules]
N: 
N:   This is the build system that Lintian believes the package is using.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debhelper
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N: 
N:   This person is a contact in the named group for this package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/mail-address
N:   Renamed from: maintainer uploader
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: mail-contact Uploaders "Debian Python Modules Team" <python-modules-team@lists.alioth.debian.org>
N:
C: pytde source: mail-contact Uploaders "Torsten Marek" <shlomme@debian.org>
N:
C: pytde-dev: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: pytde-doc: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: python3-pytde: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: python3-pytde-dbg: mail-contact Maintainer "TDE Debian Team" <team-debian@trinitydesktop.org>
N:
C: pytde source: mailing-list-on-alioth Uploaders python-modules-team@lists.alioth.debian.org
N: 
N:   The specified email address uses lists.alioth.debian.org. That system was
N:   migrated to a separate debian.net system run by DDs. Teams were encouraged
N:   to migrate to the new system, but they are also free to use the old
N:   address going forward if they like.
N:   
N:   For further information, please consult the Debian Wiki.
N: 
N:   Please refer to https://wiki.debian.org/Alioth/MailingListContinuation and
N:   Bug#962448 for details.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/mail-address
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-dev: maintainer-script-interpreter /bin/sh [postinst]
N: 
N:   Interpreter used in maintainer script or ELF
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: scripts
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-dev: maintainer-script-interpreter /bin/sh [prerm]
N:
C: python3-pytde: maintainer-script-interpreter /bin/sh [postinst]
N:
C: python3-pytde: maintainer-script-interpreter /bin/sh [prerm]
N:
C: pytde-doc: no-ctrl-scripts
N: 
N:   The package does not rely on any maintainer scripts (or other executable
N:   control files).
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: control-files
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: python3-pytde-dbg: no-ctrl-scripts
N:
C: pytde source: number-of-patches 0 [debian/patches/series]
N: 
N:   The number of patches according to the debian/patches/series file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches/count
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-dev: package-is-maintained-by-individual
N: 
N:   The package is maintained by an individual according to the
N:   maintainer/uploaders fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde-doc: package-is-maintained-by-individual
N:
C: python3-pytde: package-is-maintained-by-individual
N:
C: python3-pytde-dbg: package-is-maintained-by-individual
N:
C: pytde source: package-is-team-maintained python-modules-team@lists.alioth.debian.org (with 2 uploaders)
N: 
N:   The package is team-maintained according to the maintainer/uploaders
N:   fields in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/vcs
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: patch-system quilt
N: 
N:   This package uses the specified patch system (eg. "quilt" or "dpatch").
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/patches
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: silent-on-rules-requiring-root [debian/control]
N: 
N:   The field Rules-Requires-Root is not declared in the file debian/control.
N: 
N:   Please refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules
N:   and Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and
N:   Rules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for
N:   details.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/control/field/rules-requires-root
N:   Renamed from: rules-requires-root-missing
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: source-format 3.0 (quilt)
N: 
N:   This is the source format declared in the package.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: debian/source-dir
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: standards-version 3.8.4
N: 
N:   The standards version of the package according to Standards-Version field
N:   in the debian/control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/standards-version
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: trimmed-deb822-field §1 Build-Depends debhelper (>= 10~), libtqtinterface-dev, dh-python, python3-all-dev, python3-all-dbg, python3-sip-tqt, python3-sip-tqt-dev, python3-sip-tqt-dbg, pytqt-dev, python3-pytqt-dbg, tdelibs14-trinity-dev [debian/control:7]
N: 
N:   The raw but trimmed contents of the named field in the given Deb822 file.
N:   The number indicates the section from the top, starting at 1.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/deb822
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: trimmed-deb822-field §1 Homepage http://www.riverbankcomputing.co.uk/pytde/index.php [debian/control:9]
N:
C: pytde source: trimmed-deb822-field §1 Maintainer TDE Debian Team <team-debian@trinitydesktop.org> [debian/control:4]
N:
C: pytde source: trimmed-deb822-field §1 Priority optional [debian/control:3]
N:
C: pytde source: trimmed-deb822-field §1 Section python [debian/control:2]
N:
C: pytde source: trimmed-deb822-field §1 Source pytde [debian/control:1]
N:
C: pytde source: trimmed-deb822-field §1 Standards-Version 3.8.4 [debian/control:8]
N:
C: pytde source: trimmed-deb822-field §1 Uploaders Torsten Marek <shlomme@debian.org>, Debian Python Modules Team <python-modules-team@lists.alioth.debian.org> [debian/control:6]
N:
C: pytde source: trimmed-deb822-field §1 XSBC-Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org> [debian/control:5]
N:
C: pytde source: trimmed-deb822-field §2 Architecture any [debian/control:12]
N:
C: pytde source: trimmed-deb822-field §2 Breaks python-trinity-trinity (<< 4:14.1.0~) [debian/control:14]
N:
C: pytde source: trimmed-deb822-field §2 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, python3-pytqt [debian/control:13]
N:
C: pytde source: trimmed-deb822-field §2 Description Trinity bindings for Python 3 [Trinity]\n Python binding module that provides wide access to the Trinity API,\n also known as PyTDE. Using this, you'll get (for example) classes\n from kio, kjs, tdehtml and kprint. [debian/control:16]
N:
C: pytde source: trimmed-deb822-field §2 Package python3-pytde [debian/control:11]
N:
C: pytde source: trimmed-deb822-field §2 Provides ${python3:Provides} [debian/control:15]
N:
C: pytde source: trimmed-deb822-field §3 Architecture any [debian/control:23]
N:
C: pytde source: trimmed-deb822-field §3 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, python3-pytde (= ${binary:Version}), python3-all-dbg, python3-pytqt-dbg [debian/control:24]
N:
C: pytde source: trimmed-deb822-field §3 Description Trinity bindings for Python 3 (debug extensions) [Trinity]\n Python binding module that provides wide access to the Trinity API,\n also known as PyTDE. Using this, you'll get (for example) classes\n from kio, kjs, tdehtml and kprint.\n .\n This package contains the extension built for the Python debug interpreter. [debian/control:25]
N:
C: pytde source: trimmed-deb822-field §3 Package python3-pytde-dbg [debian/control:21]
N:
C: pytde source: trimmed-deb822-field §3 Priority optional [debian/control:22]
N:
C: pytde source: trimmed-deb822-field §4 Architecture all [debian/control:34]
N:
C: pytde source: trimmed-deb822-field §4 Breaks python-trinity-trinity-dev (<< 4:14.1.0~) [debian/control:36]
N:
C: pytde source: trimmed-deb822-field §4 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, pytqt-tools [debian/control:37]
N:
C: pytde source: trimmed-deb822-field §4 Description Trinity bindings for Python - Development files and scripts [Trinity]\n Development .sip files with definitions of PyTDE classes. They\n are needed to build PyTDE, but also as building blocks of other\n packages based on them.\n The package also contains tdepyuic, a wrapper script around PyTQt's\n user interface compiler. [debian/control:38]
N:
C: pytde source: trimmed-deb822-field §4 Package pytde-dev [debian/control:32]
N:
C: pytde source: trimmed-deb822-field §4 Replaces python-trinity-trinity-dev (<< 4:14.1.0~) [debian/control:35]
N:
C: pytde source: trimmed-deb822-field §4 Section python [debian/control:33]
N:
C: pytde source: trimmed-deb822-field §5 Architecture all [debian/control:47]
N:
C: pytde source: trimmed-deb822-field §5 Breaks python-trinity-trinity-doc (<< 4:14.1.0~) [debian/control:49]
N:
C: pytde source: trimmed-deb822-field §5 Depends ${shlibs:Depends}, ${misc:Depends} [debian/control:50]
N:
C: pytde source: trimmed-deb822-field §5 Description Documentation and examples for PyTDE [Trinity]\n General documentation and examples for PyTDE providing programming\n tips and working code you can use to learn from. [debian/control:51]
N:
C: pytde source: trimmed-deb822-field §5 Package pytde-doc [debian/control:45]
N:
C: pytde source: trimmed-deb822-field §5 Replaces python-trinity-trinity-doc (<< 4:14.1.0~) [debian/control:48]
N:
C: pytde source: trimmed-deb822-field §5 Section doc [debian/control:46]
N:
C: pytde source: trimmed-field Architecture any all
N: 
N:   These are the raw but trimmed contents of the named field in the package's
N:   primary control file.
N: 
N:   Visibility: classification
N:   Show-Always: no
N:   Check: fields/trimmed
N:   This tag is a classification. There is no issue in your package.
N: 
N:
C: pytde source: trimmed-field Binary python3-pytde, python3-pytde-dbg, pytde-dev, pytde-doc
N:
C: pytde source: trimmed-field Build-Depends debhelper (>= 10~), libtqtinterface-dev, dh-python, python3-all-dev, python3-all-dbg, python3-sip-tqt, python3-sip-tqt-dev, python3-sip-tqt-dbg, pytqt-dev, python3-pytqt-dbg, tdelibs14-trinity-dev
N:
C: pytde source: trimmed-field Checksums-Sha1 9d42643aebcaf8930b56601161514876324874e6 966728 pytde_14.1.6~pre5.orig.tar.xz\n 52c1e2a148c4feb2a845f31892768231253e84a6 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz
N:
C: pytde source: trimmed-field Checksums-Sha256 46e877c2d0499e1846cc3f31bd4112af65e179ce7ba13d3ddb1b226faa887a56 966728 pytde_14.1.6~pre5.orig.tar.xz\n e51885fb3b2b19c3762af3736704ae07f166c6af30ec870aa8b198dc385aed93 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz
N:
C: pytde source: trimmed-field Files 7da520a64c7b7e202c5870b5452fd4eb 966728 pytde_14.1.6~pre5.orig.tar.xz\n d83e8b417a4f092f8471ef03fdf84f0f 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz
N:
C: pytde source: trimmed-field Format 3.0 (quilt)
N:
C: pytde source: trimmed-field Homepage http://www.riverbankcomputing.co.uk/pytde/index.php
N:
C: pytde source: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: pytde source: trimmed-field Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>
N:
C: pytde source: trimmed-field Package-List pytde-dev deb python optional arch=all\n pytde-doc deb doc optional arch=all\n python3-pytde deb python optional arch=any\n python3-pytde-dbg deb python optional arch=any
N:
C: pytde source: trimmed-field Source pytde
N:
C: pytde source: trimmed-field Standards-Version 3.8.4
N:
C: pytde source: trimmed-field Uploaders Torsten Marek <shlomme@debian.org>, Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
N:
C: pytde source: trimmed-field Version 4:14.1.6~pre5-0ubuntu25.10.0+5
N:
C: pytde-dev: trimmed-field Architecture all
N:
C: pytde-dev: trimmed-field Breaks python-trinity-trinity-dev (<< 4:14.1.0~)
N:
C: pytde-dev: trimmed-field Depends python3:any, pytqt-tools
N:
C: pytde-dev: trimmed-field Description Trinity bindings for Python - Development files and scripts [Trinity]\n Development .sip files with definitions of PyTDE classes. They\n are needed to build PyTDE, but also as building blocks of other\n packages based on them.\n The package also contains tdepyuic, a wrapper script around PyTQt's\n user interface compiler.
N:
C: pytde-dev: trimmed-field Homepage http://www.riverbankcomputing.co.uk/pytde/index.php
N:
C: pytde-dev: trimmed-field Installed-Size 2290
N:
C: pytde-dev: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: pytde-dev: trimmed-field Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>
N:
C: pytde-dev: trimmed-field Package pytde-dev
N:
C: pytde-dev: trimmed-field Priority optional
N:
C: pytde-dev: trimmed-field Replaces python-trinity-trinity-dev (<< 4:14.1.0~)
N:
C: pytde-dev: trimmed-field Section python
N:
C: pytde-dev: trimmed-field Source pytde
N:
C: pytde-dev: trimmed-field Version 4:14.1.6~pre5-0ubuntu25.10.0+5
N:
C: pytde-doc: trimmed-field Architecture all
N:
C: pytde-doc: trimmed-field Breaks python-trinity-trinity-doc (<< 4:14.1.0~)
N:
C: pytde-doc: trimmed-field Description Documentation and examples for PyTDE [Trinity]\n General documentation and examples for PyTDE providing programming\n tips and working code you can use to learn from.
N:
C: pytde-doc: trimmed-field Homepage http://www.riverbankcomputing.co.uk/pytde/index.php
N:
C: pytde-doc: trimmed-field Installed-Size 6914
N:
C: pytde-doc: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: pytde-doc: trimmed-field Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>
N:
C: pytde-doc: trimmed-field Package pytde-doc
N:
C: pytde-doc: trimmed-field Priority optional
N:
C: pytde-doc: trimmed-field Replaces python-trinity-trinity-doc (<< 4:14.1.0~)
N:
C: pytde-doc: trimmed-field Section doc
N:
C: pytde-doc: trimmed-field Source pytde
N:
C: pytde-doc: trimmed-field Version 4:14.1.6~pre5-0ubuntu25.10.0+5
N:
C: python3-pytde: trimmed-field Architecture ppc64el
N:
C: python3-pytde: trimmed-field Breaks python-trinity-trinity (<< 4:14.1.0~)
N:
C: python3-pytde: trimmed-field Depends libc6 (>= 2.17), libgcc-s1 (>= 3.0), libstdc++6 (>= 5), libtqt3-mt (>= 4:14.1.6~pre28), tdelibs14-trinity (>= 4:14.1.6~pre13), python3 (<< 3.14), python3 (>= 3.13~), python3:any, python3-pytqt
N:
C: python3-pytde: trimmed-field Description Trinity bindings for Python 3 [Trinity]\n Python binding module that provides wide access to the Trinity API,\n also known as PyTDE. Using this, you'll get (for example) classes\n from kio, kjs, tdehtml and kprint.
N:
C: python3-pytde: trimmed-field Homepage http://www.riverbankcomputing.co.uk/pytde/index.php
N:
C: python3-pytde: trimmed-field Installed-Size 40077
N:
C: python3-pytde: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: python3-pytde: trimmed-field Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>
N:
C: python3-pytde: trimmed-field Package python3-pytde
N:
C: python3-pytde: trimmed-field Priority optional
N:
C: python3-pytde: trimmed-field Section python
N:
C: python3-pytde: trimmed-field Source pytde
N:
C: python3-pytde: trimmed-field Version 4:14.1.6~pre5-0ubuntu25.10.0+5
N:
C: python3-pytde-dbg: trimmed-field Architecture ppc64el
N:
C: python3-pytde-dbg: trimmed-field Depends libc6 (>= 2.17), libgcc-s1 (>= 3.0), libstdc++6 (>= 5), libtqt3-mt (>= 4:14.1.6~pre28), tdelibs14-trinity (>= 4:14.1.6~pre13), python3-dbg (<< 3.14), python3-dbg (>= 3.13~), python3-pytde (= 4:14.1.6~pre5-0ubuntu25.10.0+5), python3-all-dbg, python3-pytqt-dbg
N:
C: python3-pytde-dbg: trimmed-field Description Trinity bindings for Python 3 (debug extensions) [Trinity]\n Python binding module that provides wide access to the Trinity API,\n also known as PyTDE. Using this, you'll get (for example) classes\n from kio, kjs, tdehtml and kprint.\n .\n This package contains the extension built for the Python debug interpreter.
N:
C: python3-pytde-dbg: trimmed-field Homepage http://www.riverbankcomputing.co.uk/pytde/index.php
N:
C: python3-pytde-dbg: trimmed-field Installed-Size 78988
N:
C: python3-pytde-dbg: trimmed-field Maintainer TDE Debian Team <team-debian@trinitydesktop.org>
N:
C: python3-pytde-dbg: trimmed-field Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>
N:
C: python3-pytde-dbg: trimmed-field Package python3-pytde-dbg
N:
C: python3-pytde-dbg: trimmed-field Priority optional
N:
C: python3-pytde-dbg: trimmed-field Section python
N:
C: python3-pytde-dbg: trimmed-field Source pytde
N:
C: python3-pytde-dbg: trimmed-field Version 4:14.1.6~pre5-0ubuntu25.10.0+5
N:
O: pytde source: binary-nmu-debian-revision-in-source 4:14.1.6~pre5-0ubuntu25.10.0+5
N: 
N:   The version number of your source package ends in +b and a number or has a
N:   Debian revision containing three parts. These version numbers are used by
N:   binary NMUs and should not be used as the source version. (The +b form is
N:   the current standard; the three-part version number now obsolete.)
N: 
N:   Please refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the
N:   Debian Developer's Reference for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: fields/version
N: 
N:
N: We want XZ regardless of the default compression.
O: pytde source: custom-compression-in-debian-source-options compression = "xz" [debian/source/options:2]
N: 
N:   This package selects a custom compression level or algorithm in
N:   debian/source/options. Please remove the call and let dpkg-deb(1) select
N:   suitable defaults.
N:   
N:   Custom compression settings are usually chosen for one of two reasons:
N:   
N:   Higher compression levels or more advanced algorithms shrink the sizes of
N:   large files, but they can cause problems in the resource constrained
N:   environments used in Debian's buildd infrastructure. For example, higher
N:   than expected memory consumption may trigger an FTBFS or a failure to
N:   install.
N:   
N:   Lower compression levels or less advanced algorithms are sometimes needed
N:   to support older Debian version. Unfortunately, they also make it harder
N:   to change the defaults on an archive-wide basis.
N:   
N:   Some legitimate use cases trigger this tag. Please override it.
N: 
N:   Please refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)
N:   manual page for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: debian/source-dir
N:   Renamed from: debian-source-options-has-custom-compression-settings
N: 
N:
N: We want XZ regardless of the default compression.
O: pytde source: custom-compression-in-debian-source-options compression-level = 9 [debian/source/options:3]
N:
N: We are intentionally installing to /opt, so we have to live with that for
N: now.
O: python3-pytde: dir-or-file-in-opt [opt/trinity/]
N: 
N:   Debian packages should not install into /opt, because it is reserved for
N:   add-on software.
N: 
N:   Please refer to /opt : Add-on application software packages (Section 3.13)
N:   in the Filesystem Hierarchy Standard for details.
N: 
N:   Visibility: error
N:   Show-Always: no
N:   Check: files/hierarchy/standard
N: 
N:
N: We are intentionally installing to /opt, so we have to live with that for
N: now.
O: python3-pytde: dir-or-file-in-opt [opt/trinity/lib/]
N:
N: We are intentionally installing to /opt, so we have to live with that for
N: now.
O: python3-pytde: dir-or-file-in-opt [opt/trinity/lib/libkonsolepart.so]
N:
N: Small utility tool that don't have a manual page.
O: pytde-dev: no-manual-page [usr/bin/tdepyuic]
N: 
N:   Each binary in /usr/bin, /usr/sbin, /bin, /sbin or /usr/games should have
N:   a manual page
N:   
N:   Note that though the man program has the capability to check for several
N:   program names in the NAMES section, each of these programs should have its
N:   own manual page (a symbolic link to the appropriate manual page is
N:   sufficient) because other manual page viewers such as xman or tkman don't
N:   support this.
N:   
N:   If the name of the manual page differs from the binary by case, man may be
N:   able to find it anyway; however, it is still best practice to match the
N:   exact capitalization of the executable in the manual page.
N:   
N:   If the manual pages are provided by another package on which this package
N:   depends, Lintian may not be able to determine that manual pages are
N:   available. In this case, after confirming that all binaries do have manual
N:   pages after this package and its dependencies are installed, please add a
N:   Lintian override.
N: 
N:   Please refer to Manual pages (Section 12.1) in the Debian Policy Manual
N:   for details.
N: 
N:   Visibility: warning
N:   Show-Always: no
N:   Check: documentation/manual
N:   Renamed from: binary-without-manpage
N: 

--------------------