1{"tags": [{"severity": "info", "package": "pytde", "tag": "adopted-extended-field", "explanation": "A field in debian/control has an extension prefix but is also known\nwithout it.\n\nExtension prefixes like XS-* or XC-* allow experimental fields to\npropagate to the right place when packages are built with dpkg. In this\ncase, however, the field is also known without the prefix. In all\nlikelihood the field was permanently adopted, and dpkg learned how to deal\nwith it.\n\nPlease consider removing the extension prefix for the field name.\n\nVisibility: info\nShow-Always: no\nCheck: debian/control/field/adopted\nRenamed from: xc-package-type-in-debian-control\nxs-testsuite-field-in-debian-control xs-vcs-field-in-debian-control", "comment": "", "note": "(in section for source) XSBC-Original-Maintainer", "pointer": "debian/control:5"}, {"severity": "info", "package": "pytde", "tag": "debian-watch-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/watch file. This file is used for automatic detection of new\nupstream versions by the Debian External Health Status project and other\nproject infrastructure. If this package is maintained upstream, please\nconsider adding a debian/watch file to detect new releases.\n\nIf the package is not maintained upstream or if upstream uses a\ndistribution mechanism that cannot be meaningfully monitored by uscan and\nthe Debian External Health Status project, please consider adding a\ndebian/watch file containing only comments documenting the situation.\n\nPlease refer to Upstream source location: debian/watch (Section 4.11) in\nthe Debian Policy Manual and the uscan(1) manual page for details.\n\nVisibility: info\nShow-Always: no\nCheck: debian/watch", "comment": "", "note": "", "pointer": ""}, {"severity": "info", "package": "pytde", "tag": "installable-field-mirrors-source", "explanation": "The named field for an installation package in debian/control has the same\nvalue as the one inherited from the source paragraph.\n\nIn the interest of shorter and clearer files, you may wish to take\nadvantage of the inheritance rules. This field is redundant.\n\nVisibility: info\nShow-Always: no\nCheck: debian/control/field/redundant\nRenamed from: binary-control-field-duplicates-source", "comment": "", "note": "(in section for pytde-dev) Section", "pointer": "debian/control:33"}, {"severity": "info", "package": "pytde", "tag": "installable-field-mirrors-source", "explanation": "", "comment": "", "note": "(in section for python3-pytde-dbg) Priority", "pointer": "debian/control:22"}, {"severity": "info", "package": "pytde", "tag": "no-dh-sequencer", "explanation": "This package does not use the dh sequencer in debian/rules.\n\nWhile maintainers may use a variety of build systems, this one is by far\nthe most popular.\n\nMaintainers are strongly encouraged to use the dh sequencer in new\npackages and convert existing ones when appropriate.\n\nVisibility: info\nShow-Always: no\nCheck: debian/rules/dh-sequencer", "comment": "", "note": "", "pointer": "debian/rules"}, {"severity": "info", "package": "pytde", "tag": "out-of-date-standards-version", "explanation": "The source package refers to a Standards-Version older than the one that\nwas current at the time the package was created (according to the\ntimestamp of the latest debian/changelog entry). Please consider updating\nthe package to current Policy and setting this control field\nappropriately.\n\nIf the package is already compliant with the current standards, you don't\nhave to re-upload the package just to adjust the Standards-Version control\nfield. However, please remember to update this field next time you upload\nthe package.\n\nSee /usr/share/doc/debian-policy/upgrading-checklist.txt.gz in the\ndebian-policy package for a summary of changes in newer versions of\nPolicy.\n\nPlease refer to\nhttps://www.debian.org/doc/debian-policy/upgrading-checklist.html for\ndetails.\n\nVisibility: info\nShow-Always: no\nCheck: fields/standards-version", "comment": "", "note": "3.8.4 (released 2010-01-27) (current is 4.7.2)", "pointer": ""}, {"severity": "info", "package": "pytde", "tag": "unused-override", "explanation": "Your package specifies the named override but there were no tags that\ncould have been silenced by it.\n\nMaybe you fixed an underlying condition but forgot to remove the override.\nIt is also possible that the Lintian maintainers fixed a false positive.\n\nIf the override is now unused, please remove it.\n\nThis tag is similar to mismatched-override except there a tag could have\nbeen silenced if the context had matched.\n\nSometimes, overrides end up not being used because a tag appears only on\nsome architectures. In that case, overrides can be equipped with an\narchitecture qualifier.\n\nPlease refer to Architecture specific overrides (Section 2.4.3) in the\nLintian User's Manual for details.\n\nVisibility: info\nShow-Always: yes\nCheck: lintian", "comment": "", "note": "unknown-field Original-Maintainer", "pointer": "debian/source/lintian-overrides:12"}, {"severity": "pedantic", "package": "pytde", "tag": "co-maintained-package-with-no-vcs-fields", "explanation": "Based on the content of the maintainer and uploader fields this package is\nco-maintained but there are no Vcs-* fields.\n\nIt is recommended that shared maintenance of packages are co-ordinated via\na revision control system.\n\nVisibility: pedantic\nShow-Always: no\nCheck: fields/vcs\nRenamed from: co-maintained-package-with-no-vcs-headers", "comment": "", "note": "", "pointer": ""}, {"severity": "pedantic", "package": "pytde", "tag": "no-dep5-copyright", "explanation": "This package does not use a machine-readable debian/copyright file.\n\nThis format makes it easier to review licenses and can be easily parsed by\nLintian.\n\nPlease refer to\nhttps://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ for\ndetails.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/copyright/dep5", "comment": "", "note": "", "pointer": "debian/copyright"}, {"severity": "pedantic", "package": "pytde", "tag": "package-uses-old-debhelper-compat-version", "explanation": "This package uses a debhelper compatibility level that is no longer\nrecommended. Please consider using the recommended level.\n\nFor most packages, the best way to set the compatibility level is to\nspecify debhelper-compat (= X) as a Build-Depends in debian/control. You\ncan also use the debian/compat file or export DH_COMPAT in debian/rules.\n\nIf no level is selected debhelper defaults to level 1, which is\ndeprecated.\n\nPlease refer to the debhelper(7) manual page for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debhelper", "comment": "", "note": "10", "pointer": ""}, {"severity": "pedantic", "package": "pytde", "tag": "trailing-whitespace", "explanation": "This file contains lines with trailing whitespace characters.\n\nWhilst often harmless and unsightly, such extra whitespaces can also cause\ntools to interpret the whitespace characters literally. The tool diff(1)\ndoes not like them, either. They are best avoided.\n\nSome of these problems can be hard to track down.\n\nWhitespace at the end of lines may be removed with the following:\n\n$ sed -i -e 's@[[:space:]]*$@@g' debian/control debian/changelog\n\nIf you use Emacs, you can also use \"M-x wh-cl\" (whitespace-cleanup).\n\nHowever, if you wish to only remove trailing spaces and leave trailing\ntabs (eg. for Makefiles), you can use the following code snippet:\n\n$ sed -i -e 's@[ ]*$@@g' debian/rules\n\nTo remove empty lines from the end of a file, you can use:\n\n$ sed -i -e :a -e '/^\\n*$/{$d;N;};/\\n$/ba' debian/rules\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/trailing-whitespace\nRenamed from: file-contains-trailing-whitespace", "comment": "", "note": "", "pointer": "debian/changelog:147"}, {"severity": "pedantic", "package": "pytde", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:334"}, {"severity": "pedantic", "package": "pytde", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:91"}, {"severity": "pedantic", "package": "pytde", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/changelog:93"}, {"severity": "pedantic", "package": "pytde", "tag": "trailing-whitespace", "explanation": "", "comment": "", "note": "", "pointer": "debian/control:41"}, {"severity": "experimental", "package": "pytde", "tag": "source-is-missing", "explanation": "The source of the following file is missing. Lintian checked a few\npossible paths to find the source, and did not find it.\n\nPlease repack your package to include the source or add it to\n\"debian/missing-sources\" directory.\n\nPlease note, that very-long-line-length-in-source-file tagged files are\nlikely tagged source-is-missing. It is a feature not a bug.\n\nVisibility: error\nShow-Always: no\nCheck: files/source-missing\nThis tag is experimental.", "comment": "", "note": "", "pointer": "doc/classref/tdeabc/TDEABC.html"}, {"severity": "experimental", "package": "pytde", "tag": "source-is-missing", "explanation": "", "comment": "", "note": "", "pointer": "doc/classref/tdehtml/DOM.html"}, {"severity": "experimental", "package": "pytde", "tag": "source-is-missing", "explanation": "", "comment": "", "note": "", "pointer": "doc/classref/tdeio/TDEIO.html"}, {"severity": "experimental", "package": "pytde", "tag": "source-is-missing", "explanation": "", "comment": "", "note": "", "pointer": "doc/classref/tdeparts/KParts.html"}, {"severity": "experimental", "package": "pytde", "tag": "source-is-missing", "explanation": "", "comment": "", "note": "", "pointer": "doc/classref/tdeui/KStdAction.html"}, {"severity": "experimental", "package": "pytde", "tag": "upstream-metadata-file-is-missing", "explanation": "This source package is not Debian-native but it does not have a\ndebian/upstream/metadata file.\n\nThe Upstream MEtadata GAthered with YAml (UMEGAYA) project is an effort to\ncollect meta-information about upstream projects from any source package.\nThis file is in YAML format and it is used in to feed the data in the\nUltimateDebianDatabase. For example, it can contains the way the authors\nwant their software be cited in publications and some bibliographic\nreferences about the software.\n\nPlease add a debian/upstream/metadata file.\n\nPlease refer to https://dep-team.pages.debian.net/deps/dep12/ and\nhttps://wiki.debian.org/UpstreamMetadata for details.\n\nVisibility: pedantic\nShow-Always: no\nCheck: debian/upstream/metadata\nThis tag is experimental.", "comment": "", "note": "", "pointer": ""}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "The source file includes a line length that is well beyond the normally\nhuman made code line length.\n\nThis very long line length does not allow Lintian to do correctly some\nsource file checks.\n\nThis line could also be the result of some text injected by a computer\nprogram, and thus could lead to FTBFS bugs.\n\nLast but not least, long line in source code could be used to obfuscate\nthe source code and to hide stuff like backdoors or security problems.\n\nIt could be due to jslint source comments or other build tool comments.\n\nYou may report this issue upstream.\n\nVisibility: pedantic\nShow-Always: no\nCheck: files/contents/line-length\nRenamed from: insane-line-length-in-source-file\nThis tag is experimental.\n\nScreen: autotools/long-lines\nAdvocates: \"Russ Allbery\" <rra@debian.org>\nReason:\nUpstream sources using autoconf have traditionally been\ndistributed with generated ./configure scripts as well as\nother third-party m4 macro files such as libtool.\n\nWhen paired with automake, there may also be some intermediate\nMakefile.in files.\n\nA lot of sources potentially contain such files, but they are\nnot actionable by either the Debian distributor or by the\nupstream maintainer.\n\nAs a side note, modern Debian build protocols will re-create\nmany of those files via dh_autoreconf. They are present merely\nto aid in bootstrapping systems where the GNU suite may not yet\nbe available.\n\nRead more in Bug#996740.", "comment": "", "note": "1516 > 512", "pointer": "doc/classref/tdeparts/KParts.html:38"}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "", "comment": "", "note": "2158 > 512", "pointer": "doc/classref/tdeio/TDEIO.html:38"}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "", "comment": "", "note": "3388 > 512", "pointer": "doc/classref/tdeabc/TDEABC.html:38"}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "", "comment": "", "note": "573 > 512", "pointer": "doc/classref/tdeui/KStdAction.html:39"}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "", "comment": "", "note": "7110 > 512", "pointer": "doc/classref/tdehtml/DOM.html:38"}, {"severity": "experimental", "package": "pytde", "tag": "very-long-line-length-in-source-file", "explanation": "", "comment": "", "note": "755 > 512", "pointer": "admin/acinclude.m4.in:2931"}, {"severity": "overridden", "package": "pytde", "tag": "binary-nmu-debian-revision-in-source", "explanation": "The version number of your source package ends in +b and a number or has a\nDebian revision containing three parts. These version numbers are used by\nbinary NMUs and should not be used as the source version. (The +b form is\nthe current standard; the three-part version number now obsolete.)\n\nPlease refer to Recompilation or binary-only NMU (Section 5.10.2.1) in the\nDebian Developer's Reference for details.\n\nVisibility: warning\nShow-Always: no\nCheck: fields/version", "comment": "", "note": "4:14.1.6~pre5-0ubuntu25.10.0+5", "pointer": ""}, {"severity": "overridden", "package": "pytde", "tag": "custom-compression-in-debian-source-options", "explanation": "This package selects a custom compression level or algorithm in\ndebian/source/options. Please remove the call and let dpkg-deb(1) select\nsuitable defaults.\n\nCustom compression settings are usually chosen for one of two reasons:\n\nHigher compression levels or more advanced algorithms shrink the sizes of\nlarge files, but they can cause problems in the resource constrained\nenvironments used in Debian's buildd infrastructure. For example, higher\nthan expected memory consumption may trigger an FTBFS or a failure to\ninstall.\n\nLower compression levels or less advanced algorithms are sometimes needed\nto support older Debian version. Unfortunately, they also make it harder\nto change the defaults on an archive-wide basis.\n\nSome legitimate use cases trigger this tag. Please override it.\n\nPlease refer to Bug#829100, Bug#906614, Bug#909696, and the dpkg-deb(1)\nmanual page for details.\n\nVisibility: warning\nShow-Always: no\nCheck: debian/source-dir\nRenamed from: debian-source-options-has-custom-compression-settings", "comment": "We want XZ regardless of the default compression.", "note": "compression = \"xz\"", "pointer": "debian/source/options:2"}, {"severity": "overridden", "package": "pytde", "tag": "custom-compression-in-debian-source-options", "explanation": "We are intentionally installing to /opt, so we have to live with that for\nnow.", "comment": "We want XZ regardless of the default compression.", "note": "compression-level = 9", "pointer": "debian/source/options:3"}, {"severity": "classification", "package": "pytde", "tag": "debhelper-compat-level", "explanation": "This is the debhelper compat level used specified by this package.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "10", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "debian-build-system", "explanation": "This is the build system that Lintian believes the package is using.\n\nVisibility: classification\nShow-Always: no\nCheck: debhelper\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "debhelper", "pointer": "debian/rules"}, {"severity": "classification", "package": "pytde", "tag": "mail-contact", "explanation": "This person is a contact in the named group for this package.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nRenamed from: maintainer uploader\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Maintainer \"TDE Debian Team\" <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "mail-contact", "explanation": "", "comment": "", "note": "Uploaders \"Debian Python Modules Team\" <python-modules-team@lists.alioth.debian.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "mail-contact", "explanation": "", "comment": "", "note": "Uploaders \"Torsten Marek\" <shlomme@debian.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "mailing-list-on-alioth", "explanation": "The specified email address uses lists.alioth.debian.org. That system was\nmigrated to a separate debian.net system run by DDs. Teams were encouraged\nto migrate to the new system, but they are also free to use the old\naddress going forward if they like.\n\nFor further information, please consult the Debian Wiki.\n\nPlease refer to https://wiki.debian.org/Alioth/MailingListContinuation and\nBug#962448 for details.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/mail-address\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Uploaders python-modules-team@lists.alioth.debian.org", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "number-of-patches", "explanation": "The number of patches according to the debian/patches/series file.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches/count\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "0", "pointer": "debian/patches/series"}, {"severity": "classification", "package": "pytde", "tag": "package-is-team-maintained", "explanation": "The package is team-maintained according to the maintainer/uploaders\nfields in the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/vcs\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "python-modules-team@lists.alioth.debian.org (with 2 uploaders)", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "patch-system", "explanation": "This package uses the specified patch system (eg. \"quilt\" or \"dpatch\").\n\nVisibility: classification\nShow-Always: no\nCheck: debian/patches\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "quilt", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "silent-on-rules-requiring-root", "explanation": "The field Rules-Requires-Root is not declared in the file debian/control.\n\nPlease refer to usr/share/doc/dpkg/spec/rootless-builds.txt, debian/rules\nand Rules-Requires-Root (Section 4.9.2) in the Debian Policy Manual, and\nRules-Requires-Root (Section 5.6.31) in the Debian Policy Manual for\ndetails.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/control/field/rules-requires-root\nRenamed from: rules-requires-root-missing\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "", "pointer": "debian/control"}, {"severity": "classification", "package": "pytde", "tag": "source-format", "explanation": "This is the source format declared in the package.\n\nVisibility: classification\nShow-Always: no\nCheck: debian/source-dir\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "standards-version", "explanation": "The standards version of the package according to Standards-Version field\nin the debian/control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/standards-version\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "3.8.4", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "The raw but trimmed contents of the named field in the given Deb822 file.\nThe number indicates the section from the top, starting at 1.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/deb822\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "\u00a71 Build-Depends debhelper (>= 10~), libtqtinterface-dev, dh-python, python3-all-dev, python3-all-dbg, python3-sip-tqt, python3-sip-tqt-dev, python3-sip-tqt-dbg, pytqt-dev, python3-pytqt-dbg, tdelibs14-trinity-dev", "pointer": "debian/control:7"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Homepage http://www.riverbankcomputing.co.uk/pytde/index.php", "pointer": "debian/control:9"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": "debian/control:4"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Priority optional", "pointer": "debian/control:3"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Section python", "pointer": "debian/control:2"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Source pytde", "pointer": "debian/control:1"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Standards-Version 3.8.4", "pointer": "debian/control:8"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 Uploaders Torsten Marek <shlomme@debian.org>, Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>", "pointer": "debian/control:6"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a71 XSBC-Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>", "pointer": "debian/control:5"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Architecture any", "pointer": "debian/control:12"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Breaks python-trinity-trinity (<< 4:14.1.0~)", "pointer": "debian/control:14"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, python3-pytqt", "pointer": "debian/control:13"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Description Trinity bindings for Python 3", "pointer": "debian/control:16"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Package python3-pytde", "pointer": "debian/control:11"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a72 Provides ${python3:Provides}", "pointer": "debian/control:15"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Architecture any", "pointer": "debian/control:23"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, python3-pytde (= ${binary:Version}), python3-all-dbg, python3-pytqt-dbg", "pointer": "debian/control:24"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Description Trinity bindings for Python 3 (debug extensions)", "pointer": "debian/control:25"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Package python3-pytde-dbg", "pointer": "debian/control:21"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a73 Priority optional", "pointer": "debian/control:22"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Architecture all", "pointer": "debian/control:34"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Breaks python-trinity-trinity-dev (<< 4:14.1.0~)", "pointer": "debian/control:36"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Depends ${shlibs:Depends}, ${misc:Depends}, ${python3:Depends}, pytqt-tools", "pointer": "debian/control:37"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Description Trinity bindings for Python - Development files and scripts", "pointer": "debian/control:38"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Package pytde-dev", "pointer": "debian/control:32"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Replaces python-trinity-trinity-dev (<< 4:14.1.0~)", "pointer": "debian/control:35"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a74 Section python", "pointer": "debian/control:33"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Architecture all", "pointer": "debian/control:47"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Breaks python-trinity-trinity-doc (<< 4:14.1.0~)", "pointer": "debian/control:49"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Depends ${shlibs:Depends}, ${misc:Depends}", "pointer": "debian/control:50"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Description Documentation and examples for PyTDE", "pointer": "debian/control:51"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Package pytde-doc", "pointer": "debian/control:45"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Replaces python-trinity-trinity-doc (<< 4:14.1.0~)", "pointer": "debian/control:48"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-deb822-field", "explanation": "", "comment": "", "note": "\u00a75 Section doc", "pointer": "debian/control:46"}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "These are the raw but trimmed contents of the named field in the package's\nprimary control file.\n\nVisibility: classification\nShow-Always: no\nCheck: fields/trimmed\nThis tag is a classification. There is no issue in your package.", "comment": "", "note": "Architecture any all", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Binary python3-pytde, python3-pytde-dbg, pytde-dev, pytde-doc", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Build-Depends debhelper (>= 10~), libtqtinterface-dev, dh-python, python3-all-dev, python3-all-dbg, python3-sip-tqt, python3-sip-tqt-dev, python3-sip-tqt-dbg, pytqt-dev, python3-pytqt-dbg, tdelibs14-trinity-dev", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha1 9d42643aebcaf8930b56601161514876324874e6 966728 pytde_14.1.6~pre5.orig.tar.xz\\n 52c1e2a148c4feb2a845f31892768231253e84a6 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Checksums-Sha256 46e877c2d0499e1846cc3f31bd4112af65e179ce7ba13d3ddb1b226faa887a56 966728 pytde_14.1.6~pre5.orig.tar.xz\\n e51885fb3b2b19c3762af3736704ae07f166c6af30ec870aa8b198dc385aed93 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Files 7da520a64c7b7e202c5870b5452fd4eb 966728 pytde_14.1.6~pre5.orig.tar.xz\\n d83e8b417a4f092f8471ef03fdf84f0f 8676 pytde_14.1.6~pre5-0ubuntu25.10.0+5.debian.tar.xz", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Format 3.0 (quilt)", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Homepage http://www.riverbankcomputing.co.uk/pytde/index.php", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Maintainer TDE Debian Team <team-debian@trinitydesktop.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Original-Maintainer Ricardo Javier Cardenes Medina <rcardenes@debian.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Package-List pytde-dev deb python optional arch=all\\n pytde-doc deb doc optional arch=all\\n python3-pytde deb python optional arch=any\\n python3-pytde-dbg deb python optional arch=any", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Source pytde", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Standards-Version 3.8.4", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Uploaders Torsten Marek <shlomme@debian.org>, Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>", "pointer": ""}, {"severity": "classification", "package": "pytde", "tag": "trimmed-field", "explanation": "", "comment": "", "note": "Version 4:14.1.6~pre5-0ubuntu25.10.0+5", "pointer": ""}], "summary": {"tags_count_by_severity": {"error": 0, "warning": 0, "info": 7, "pedantic": 8, "experimental": 12, "overridden": 3, "classification": 61}, "package_filename": {"pytde": "pytde_14.1.6~pre5-0ubuntu25.10.0+5.dsc"}, "tags_found": ["adopted-extended-field", "co-maintained-package-with-no-vcs-fields", "debhelper-compat-level", "debian-build-system", "debian-watch-file-is-missing", "installable-field-mirrors-source", "mail-contact", "mailing-list-on-alioth", "no-dep5-copyright", "no-dh-sequencer", "number-of-patches", "out-of-date-standards-version", "package-is-team-maintained", "package-uses-old-debhelper-compat-version", "patch-system", "silent-on-rules-requiring-root", "source-format", "source-is-missing", "standards-version", "trailing-whitespace", "trimmed-deb822-field", "trimmed-field", "unused-override", "upstream-metadata-file-is-missing", "very-long-line-length-in-source-file"], "overridden_tags_found": ["binary-nmu-debian-revision-in-source", "custom-compression-in-debian-source-options"], "lintian_version": "2.122.0ubuntu1", "distribution": "debian:questing"}, "version": 1}